Pro-Ject RPM 10 Carbon Product information

RPM 10 Carbon
Pro-Ject
Brand
Pro-Ject
Model
RPM 10 Carbon
Category
Audio turntables
Type
Product information

Pro-Ject RPM 10 Carbon is a high-end turntable designed for audiophiles seeking exceptional sound quality. Its advanced sandwich construction plinth and mass-loaded subchassis with magnetic feet effectively isolate vibrations, reducing unwanted resonance. The inverted main bearing with ceramic ball/plate and magnetically suspended platter ensure stable and low-noise operation. With precise DC-driven AC generator and electronic speed control, you can easily switch between 33 and 45 RPM, and an optional 78 RPM is available.

Pro-Ject RPM 10 Carbon is a high-end turntable designed for audiophiles seeking exceptional sound quality. Its advanced sandwich construction plinth and mass-loaded subchassis with magnetic feet effectively isolate vibrations, reducing unwanted resonance. The inverted main bearing with ceramic ball/plate and magnetically suspended platter ensure stable and low-noise operation. With precise DC-driven AC generator and electronic speed control, you can easily switch between 33 and 45 RPM, and an optional 78 RPM is available.

PRODUCT INFORMATION
Technical data and price changes reserved.
Page 1/2
PRO-JECT AUDIO SYSTEMS
www.project-audio.com
RPM 10 CARBON
Highend turntable with 10“ Evo tonearm
n/c MSRP 3.300 € (incl. VAT)
Cadenza Red UVP 3.990 € (incl. VAT)
• Advanced sandwich construction of plinth with
combination of MDF, carbon fibre and steel pellets
• Plinth manufactured with thermo treatment
• Mass loaded subchassis design with magnetic feet
• 14,5kg Ground it Carbon equipment base included
• Inverted main bearing with ceramic ball/plate
• Magnetically suspended extra-heavy acoustically inert
aluminium platter with TPE damping and vinyl mat on top
• DC power supply with AC motor
• Precise DC driven AC generator (Speed Box) built-in
• Electronic speed control with 33/45 rpm switching
• 78 rpm optional
• Outboard motor construction with massive steel base
• Pre-mounted 10“ tonearm 10 cc Evolution
• 5P Connect it Phono CC cable with RCA plugs (XLR
available as an option)
Speed: 33, 45 (electronic speed change)
Drive principle: belt drive
Platter: 10,4kg aluminium (300mm diameter)
Mains bearing: inverted stainless steel with ceramic ball/plate
Wow & utter: 33: +/- 0,11% 45: +/- 0,10%
Speed drift: 33: +/- 0,01% 45: +/- 0,01%
Signal to noise: 73dB
Tonearm: 10” Carbon EVO
Eective arm length: 254 mm
Eective arm mass: 8,5 g
Overhang: 16mm
Tracking force: 10 - 35mN
Supplied counterweights: 5 - 7,5gr / 7 - 10gr / 9 - 11gr / 10
- 14gr
External power supply: 15 volts DC / 1,6A
Power connection: 110/120 or 230/240 Volt - 50 or 60 Hz
Power consumption: 15 watts max / < 0,3 watts standby
Dimensions: 480 x 210 x 330mm (WxHxD)
Weight: 22,0 kg net
Weight base: 14,5 kg net
PRODUCT INFORMATION
Technical data and price changes reserved.
Page 2/2
PRO-JECT AUDIO SYSTEMS
www.project-audio.com
RPM 10 Carbon: Beautiful, clever
design with ultimate high-end sound
quality
Thanks to extensive research and development, we´
re now lift our classic RPM design to an even higher
level. The RPM 10 Carbon uses a new extra-heavy
chassis. It features a special CNC-machined MDF base
with resin-coated steel pellets to form an extra-heavy
and precise sandwich construction. A special complex
heat treatment and carbon surface coating ensures su-
perior low resonance levels. The mass-loaded chassis is
ef-fectively decoupled from its surface using magnetic
feet. Combined with a new special polished aluminium
platter with internal TPE damping and a vinyl layer on top,
the inverted ceramic main bearing delivers an absolutely
stable turntable speed with extra-low rumble due to the
magnetic suspen-sion of the platter. The heavy outboard
motor unit is equipped with precise motor control and
features a built-in switch between 33 & 45 rpm. Last but
not least, the non-compromise 10“ Evo tonearm with
conical carbon-bre arm tube and inverted bearing
design ensures perfect tracking, even with demanding
cartridges. Highly exible top-grade copper internal
wiring is used. Delivered with Ground it Carbon
equipment base & top-grade 5P pho-no cable ´Connect
it CC´ with RCA plugs (XLR as an option). Acrylic
dustcover Cover it 1 is also available.
  • Page 1 1
  • Page 2 2

Pro-Ject RPM 10 Carbon Product information

RPM 10 Carbon
Pro-Ject
Brand
Pro-Ject
Model
RPM 10 Carbon
Category
Audio turntables
Type
Product information

Pro-Ject RPM 10 Carbon is a high-end turntable designed for audiophiles seeking exceptional sound quality. Its advanced sandwich construction plinth and mass-loaded subchassis with magnetic feet effectively isolate vibrations, reducing unwanted resonance. The inverted main bearing with ceramic ball/plate and magnetically suspended platter ensure stable and low-noise operation. With precise DC-driven AC generator and electronic speed control, you can easily switch between 33 and 45 RPM, and an optional 78 RPM is available.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents