Pro-Ject RPM 1 Carbon Product information

RPM 1 Carbon
Pro-Ject
Brand
Pro-Ject
Model
RPM 1 Carbon
Category
Audio turntables
Type
Product information

Pro-Ject RPM 1 Carbon is a high-quality turntable that combines innovative features with classic design. It boasts a precision belt drive system, an ultra-precise DC-driven AC generator motor, and an inverted platter bearing with a ceramic ball for reduced rumble. The 8.6” S-shaped tonearm is made of carbon fiber, aluminum, and resin for rigidity, damping, and resonance reduction, making it suitable for MC cartridges. Additional features include magnetic antiskating and a TPE-damped counterweight, ensuring accurate tracking and minimizing unwanted vibrations.

Pro-Ject RPM 1 Carbon is a high-quality turntable that combines innovative features with classic design. It boasts a precision belt drive system, an ultra-precise DC-driven AC generator motor, and an inverted platter bearing with a ceramic ball for reduced rumble. The 8.6” S-shaped tonearm is made of carbon fiber, aluminum, and resin for rigidity, damping, and resonance reduction, making it suitable for MC cartridges. Additional features include magnetic antiskating and a TPE-damped counterweight, ensuring accurate tracking and minimizing unwanted vibrations.

PRODUCT INFORMATION
Technical data and price changes reserved.
Page 1/2
PRO-JECT AUDIO SYSTEMS
www.project-audio.com
RPM 1 CARBON
Manual turntable
n/c MSRP 449 € (incl. VAT)
2M red MSRP 499 € (incl. VAT)
High-gloss colour options:
• Precision belt drive using synchronous motor
• Ultra-precision DC-driven AC generator motor power
• Inverted platter bearing with ceramic ball
• Platter made from MDF using felt mat
• 8,6” S-shaped tonearm made from carbon, aluminium,
resin utilising special heat and pressure treatments
• Magnetic antiskating
• Counterweight with TPE damping
• Available with or without Ortofon 2M Red cartridge
• 3 high-gloss colours (black, red, white)
• Lid available as an option
Speed: 33, 45 (manual speed change)
Drive principle: belt drive
Platter: 300mm MDF
Mains bearing: stainless steel axle with ceramic ball
Wow & utter: 33: 0,14% I 45: 0,13%
Speed drift: 33: 0,27% I 45: 0,1%
Signal to noise: - 71dB
Tonearm: 8,6” carbon; aluminium and resin
Eective arm length: 218,5 mm
Eective arm mass: 13,5 g
Overhang: 22mm
Tracking force: 0 - 25mN
Included accessories: 15 volts DC / 500 mA power supply
Power connection: 110/240 Volt - 50 or 60 Hz
Power consumption: 5 watt max / < 0,5 watt standby
Dimensions: 380 x 110 x 350mm (WxHxD)
Weight: 3,8 kg net
PRODUCT INFORMATION
Technical data and price changes reserved.
Page 2/2
PRO-JECT AUDIO SYSTEMS
www.project-audio.com
Ingenious entry to the world of
luxurious styling for audiophiles
Our newest „BEST BUY“ star implements a radical
concept that does not compromise sound quality at an
entry-level price.
RPM-1 Carbon utilises a lot of innovations and enhance-
ments: A low resonance chassis holds a newly designed
inverted platter bearing with ceramic ball for further
reduced rumble. An outboard 15V AC motor is smooth-
ly driven using an ultra-precision AC generator with DC
power supply for further enhanced speed stability. A
completely new designed S-shaped tonearm tube is
made from carbon bre, aluminium and resin. Using a
complex 3-step process with heat treatment and 100bar
pressure, arm tube rigidity is strenghtened, internal
damping is maximized and resonances are reduced to
a minimum. This makes the tonearm also suitable for
MC cartridges. Additional features are a new magnetic
antiskating mechanism and a TPE-damped
counterweight. All ingredients add up to a miracle in
sound for the price and ultra-stylish look!
HG piano HG whiteHG red
Acryl-it RMP Carbon optional
  • Page 1 1
  • Page 2 2

Pro-Ject RPM 1 Carbon Product information

RPM 1 Carbon
Pro-Ject
Brand
Pro-Ject
Model
RPM 1 Carbon
Category
Audio turntables
Type
Product information

Pro-Ject RPM 1 Carbon is a high-quality turntable that combines innovative features with classic design. It boasts a precision belt drive system, an ultra-precise DC-driven AC generator motor, and an inverted platter bearing with a ceramic ball for reduced rumble. The 8.6” S-shaped tonearm is made of carbon fiber, aluminum, and resin for rigidity, damping, and resonance reduction, making it suitable for MC cartridges. Additional features include magnetic antiskating and a TPE-damped counterweight, ensuring accurate tracking and minimizing unwanted vibrations.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents