Akura APLDVD3221W-HDID- User manual

Akura
Brand
Akura
Model
APLDVD3221W-HDID-
Category
LCD TVs
Type
User manual

This manual is also suitable for

Model : APLDVD3221W – HDID
MSD109
Digital LCD TV
with DVD DVBt “Freeview” HDMI
Customer Help Line : 0845 293 7698
Website : www.ekey.co.uk
Contents
LCD SCREEN WARNING Inside cover page
1. Safety Information 2
2. Safety Instructions 3
3. Accessories 4
4. User Controls 5
5. Remote Control 6
6. Connections 8
7. Menu Operation 11
8. Teletext 17
9. EPG (Electronic Programme Guide 18
10. DVD Operation 18
11. DVD Setup menu’s 18
12. Trouble Shooting Guide 20
13. Disc Care 21
14. Wall mounting 21
15. Specifications 22
16. Rovi Statement 22
1. Safety Information
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of un-insulated “dangerous voltage”
within the products enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to the persons.
The exclamation point within an equilateral triangle is intend to alert the user to
the presence of important operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
Correct disposal of this Product
(Waste Electrical & Electronic Equipment (WEEE)
The crossed out “Wheelie bin” is intended to show that this appliance must not be
placed with ordinary household waste at the end of its useful life. To prevent
possible harm to the environment or human health from uncontrolled waste
disposal, please keep separate from other household waste and recycle it
responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where you purchased the
product, or their local government office for details of where and how you can take
this item for environmentally safe re-cycling.
Business users should contact their supplier and check the terms and conditions of
the purchase contract. This product must not be mixed with other commercial
wastes for disposal
This appliance complies with European Safety and Electrical directives
This unit is a “CLASS 1” laser product. This product uses a visible laser beam
which could cause hazardous radiation exposure. Ensure the player is operated
as instructed. Do not remove any covers or look into the DVD slot / opening
whilst power is applied. Do NOT modify or adjust any controls that may affect
laser emissions. Should the appliance become faulty, consult a qualified
technician.
2
2. Safety Instructions
CAUTION. PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS
USER MANUAL AND MARKED ON THE APPLIANCE. RETAIN THIS BOOKLET FOR FUTURE USE.
This set has been designed and manufactured to assure your personal safety. Improper use can
result in Electric shock or Fire hazard. The safeguards in this appliance will protect you if you
observe the correct procedures for installation, servicing and operation. There are NO user
parts inside. DO NOT REMOVE THE CASE OR OTHER COVERS OR YOU MAY BE EXPOSED TO
DANGEROUS VOLTAGES OR LASER RADIATION AND WILL INVALIDATE YOUR WARRANTY.
REFER ALL SERVICING TO QUALIFIED SERVICE PERSONNEL.
Unpacking and Handling. Open the carton carefully and remove the polyfoam packing. Carefully lift
the TV and place onto a firm stable surface. Lift off the Poly bag and retain all packaging for future use.
Keep all packaging away from small children and animals.
Placing TV. The TV should be placed on a firm table or shelf. If placing in a cabinet ensure there is
sufficient spacing for air flow and access for the DVD player opening..
Connections. When connecting the TV to external sources and the mains supply, do not place wires
that can be tripped over. Do not trap or place heavy objects on the mains lead or adaptor.
Ventilation and Heat Sources. Do not place material over the ventilation slots, this will cause the TV to
overheat and fail. Do not place the TV in direct sunlight or near heat sources such as radiators or fires.
Moisture. Do not place the TV in wet or damp conditions, such as steamy kitchens, basements or other
damp places. Do not allow water or other fluids to enter the TV. Do not touch the Mains plug or adaptor
with wet hands. Should moisture enter the TV, disconnect from the supply and call the customer help
line.
Cleaning. Disconnect the TV from the mains supply. Use a soft dry cloth, for stubborn stains use a soft
moist cloth with a dilute mild detergent.. Do NOT use petrol based fluids or abrasive materials.
LCD Screen. Do not hit or cause impact to the LCD screen. The screen consists of many individual
pixels and is easily damaged. Bright or dark dots may occur and are not covered by warranty.
3
DIGITAL SWITCH OVER AND YOUR TV.
WHAT YOU NEED TO DO TO ENJOY WATCHING TV DURING AND FOLLOWING DIGITAL SWITCH
OVER.
Starting in 2008 and ending in 2012, television services will go completely digital, TV region by TV region.
To continue using this digital TV during and following the digital switchover, you will need to “reset” your
digital TV channels.
Users of this digital TV must reset on at least 2 different occasions, normally 1 month apart when your
switchover happens. Digital UK, the body leading the digital switchover, and broadcasters, will advise you
when to reset your digital channels on each occasion.
If you do not reset your digital channels, you risk loosing some or all of your TV services during and
following switchover.
Please refer to this instruction manual to retune the Digital TV services.
Do NOT use “ADD” channels, you MUST “RESET” and allow a complete retune. (See page 14)
For more information please contact the “Customer Help Line” (Page 20) or visit www.digitaluk.co.uk
Lightning.
During a thunderstorm or when leaving the appliance for long periods such as holidays, disconnect the
aerial input (if external aerial) and remove the mains plug, This is to prevent power surges damaging the
apparatus
Headphone Use.
When using headphones do not use for long periods. Loud music can permanently damage your hearing.
Dis-connection Device. The mains plug is the Disconnection device and MUST be accessible at all
times
Candles and Open flames. Do not place lighted candles (“T” Lights) on the top or at the sides of the
TV, or any other naked flame near the TV cabinet.
Ventilation slots. Do not allow objects to be dropped inside the ventilation slot, this could cause a short
circuit and a possible fire. Do not allow chains to be dangled into the TV. A serious electrical shock my
occur.
3. Accessories
Please check the contents of the TV before
you continue. If any item is missing please
contact your point of purchase.
User Manual Remote Control
Mains lead
4
4. User Controls.
Top View
1. Vol – Reduces Volume level. In menu mode will shift the selection to the left, or decreases level
being adjusted.
2. Vol + Increases Volume level. In menu mode, will shift the selection to the right, or increase level
being adjusted.
3. CH - Reduces channel selection by 1 with each press. In menu mode will shift the selection
downwards.
4. CH + Increases channel selection by 1 with each press. In menu mode will shift the selection
upwards.
5. Menu. Selects the MENU function. If in a sub menu, will revert to previous level of menu.
6. Input. Selects the different input sources, each press will select another input source.
7. Power. Switches TV On from standby. Also returns TV to standby
8. LED. Displays Tv status. In standby illuminates Red, in operation illuminates Green.
9. I R Lens. Remote control receiver lens. Do not obstruct or cover.
Side view
DVD Controls
1. Press to play and pause disc. If paused press to restart playing.
2. Press to insert or eject disc from player.
3. Press to select previous track or chapter.
4. Press to select next track or chapter.
5. Press to fast forward play
6. Press to stop disc playing. Press once to “pre stop” press again to fully stop.
5
Front View
5. Remote Control.
6
2. MUTE. Press to mute sound, press
again to restore sound.
4. INFO. Displays information of disc
contents, time playing etc.
6. SLEEP. Sets sleep timer, sets from 3
hrs to 10 minutes.
8. ZOOM. Selects picture sizes and
aspect ratios.
10. FREEZE. Freezes picture. Press
again to restore normal viewing.
12. DTV/RADIO. Selects TV or Radio in
DVBt mode.
14. FAV./SLOW. Displays Favourite
program listing. Slow selects slow
motion in DVD mode.
16. CH LIST/STEP. Displays list of all
received channels. Step In DVD pause
mode allows stepping forward
18. EXIT. Exits from menu operation.
20. RIGHT. Navigation button in menu.
22. DOWN. Navigation button in menu.
24. PROG +. Channel UP select.
26. PROG -. Channel DOWN select.
28. DVD SETUP/RECALL. Sets
parameters of DVD settings. Recalls
previous viewed channel
30. AUDIO/LANG. Switches between
Nicam and Mono in Analog TV mode. In
DVBt mode selects different sound
tracks if transmitted. Lang DVD sound
track language.
32.SUBTITLE. Displays subtitles in
Analog, DVBt and DVD modes
34. SIZE/GOTO. Changes Text size in
text mode. Goto Allows you to set the
GOTO position on DVD discs.
36. A-B/SUBPAGE. A-B selects the
points of repeat in DVD mode. Sub-
page selects subpage numbers in text
mode.
38. STOP/HOLD. Stops playing DVD
discs. Hold freezes text pages.
40. NEXT/BLUE. Next selects next
chapter or track in DVD mode. Blue fast
text mode.
42. DVD ZOOM. Changes picture size
in DVD mode.
1. STANDBY. Switches TV to Standby
and Operation.
3. P MODE. Selects picture modes.
5. S MODE. Selects sound modes.
7. 0-9. Numeric buttons for direct
channel selection or track/chapter
numbers.
9. SOURCE. Selects various input
modes.
11. UP. Navigation button in menu
13. OK. Confirmation button in menu.
15. LEFT. Navigation button in menu.
17. VOL -. Volume down button.
19. VOL +. Volume up button.
21. LCD MENU. Enters Setup menus.
23. EPG / DVD Menu. Selects
Electronic Programme Guide. DVD
Menu Selects DVD disc contents
menu.
25. TXT / TITLE. Selects Teletext.
Title selects the DVD disc titles
27. ANGLE/INDEX. Selects viewing
angle on DVD. Index selects Text
index page.
29. EJECT/MIX. Ejects disc. Mix
Plays picture in background of Text.
31. PLAY/REVEAL. Play/Pause DVD
disc, Reveals hidden answers in Text
quiz pages.
33. FAST REWIND/RED. Fast rewind
DVD playing. Red fast text mode
button.
35. FAST FORWARD/GREEN. Fast
forwards DVD playing. Green fast text
mode.
37. PROG. Allows you to select
different points of a CD or MP3 disc to
play.
39. REPEAT. Selects different DVD
disc repeat modes. “Chapter, Title, All”
41. PREV/YELLOW. Prev selects
previous track or chapter in DVD
mode. Yellow fast text mode.
43. DISPLAY. In DVD mode displays
the Track, Chapter and Time played
Battery Fitting and Disposal
1. Open the battery cover
2. Fit two “AAA” batteries. Ensure the battery polarities are correct i.e + to + and – to -.
3. Replace the battery cover
To prevent injury, do NOT break open or throw exhausted batteries in a fire.
Do not mix batteries, old and new, Carbon or Alkaline.
Do not use re chargeable batteries.
Remove batteries if not using the remote control for long periods to prevent leakage.
If the batteries do leak, clean the compartment with soapy water and scrape any residue
from the contacts. To NOT touch or ingest battery residue.
Should you swallow chemicals leaked from a battery, please URGENTLY consult a medical
adviser.
4. In the event that the remote control does not function, please check that the + VE end of
the battery terminals are in contact with the connection spring. Some batteries have a
smaller + VE terminal and may not reach the spring. You can stretch the spring slightly to
ensure connection
7
5. Remote Control.
6
Do Not place used batteries in domestic waste, consult your battery retailer or your
local waste disposal company for advice.”.
6. Connections.
Switch. Turn the Power On or Off
AC Input. 110 – 240V AC 50/60 Hz.
HDMI. Input from HDMI source (High Definition).
Y, Pb,Pr. Component video inputs from sources with progressive scan outputs.
R/L. Audio Input for Y,Pb,Pr
SCART. Audio /Video input and output. (General quality).
PC AUDIO. Stereo audio input from PC (Used in conjunction with VGA input).
VGA. PC input (RGB).
S-VIDEO. Suitable for camcorder input.
CVBS. Low quality video input (1vPP 75 Ω)
AUDIO L/R. Low level audio inputs used in conjunction with CVBS input.
TV TUNER. RF input from TV aerial or cable source.( 1 m/V @ 75 Ω) typical.
CI SLOT. Place a CAM (Conditional Access Module) into this point to allow a “Pay per View” card
to be used.
HDMI Input CVBS Input
IMPORTANT. When making connections ensure the TV is disconnected from the
MAINS supply input, and that the appliance being connected is also disconnected from
the mains supply.
Typical connections
Disconnect TV from mains supply.
Connect HDMI input.
Re connect mains supply to both TV
and source.
Use SOURCE button to select HDMI.
Disconnect TV from mains supply.
Connect CVBS and Audio L/R (if
required).
Re connect mains supply to TV and
source.
Use SOURCE button to select AV
8
6. Connections.
PC connections.
Disconnect TV from mains supply.
Connect VGA (15 pin) plug to TV and
PC.
Connect stereo audio lead.
Re connect mains supply to TV and
PC.
Use SOURCE button to select VGA.
S-VIDEO.
Disconnect TV from
mains supply.
Connect S-VIDEO
lead and Audio L/R leads to
TV and appliance.
Re connect mains supply to
TV and power to appliance.
Use SOURCE to select S-
VIDEO.
9
Antenna
or cable
SCART.
Disconnect TV from mains
supply.
Connect scart lead to TV and
appliance.
Re connect mains supply to TV
and power to appliance.
Use SOURCE to select
SCART.
In some circumstances the TV
will automatically select scart
when the appliance is used.
6. Connections.
10
Y,Pb,Pr
Disconnect TV from mains supply.
Connect Y,Pb,Pr leads and audio leads to TV and
appliance.
It is wise to use dedicated Y,Pb,Pr leads from your
retailer.
Re connect mains supply to TV and power to
appliance.
Use SOURCE to select Y,Pb,Pr.
Source/ Input Menu.
To access the Source menu, press the SOURCE button on the Remote Control
or the INPUT button on the TV.
Using the ▲/▼ buttons select the Source / Input required and press OK to
select.
7. Menu Operation.
Connect the TV/DVD to the Mains supply and suitable aerial. It is advisable not to connect other apparatus
until you have established that the TV is working correctly. If using the TV for DVBt (Freeview) viewing, the
existing aerial may not be suitable. Indoor aerials (set top) may not be suitable for some of the received
stations. If stations are missing, freeze or break up, it is certainly the aerial signal that is not sufficient.
Turn on the power at the rear of the TV and a Red led will be displayed in the lower right corner.
Press either the Standby button on the remote control or the Power button on the TV.
The led will now turn Green and the screen will light up after approx 5 seconds.
At this stage no stations will be stored.
Basic Tuning
Press the LCD MENU button on the Remote Control. The menu as in Fig
1 will be shown.
Using the ▲/▼ buttons select “AUTOTUNING” and press OK.
Menu Fig 2 will be displayed. If you are in another country other than
UK, use the ►/◄ buttons to select the correct country, otherwise press
▼ to select START and press OK.
Menu fig 3 will be displayed and when tuning is complete the TV will
display the first channel (BBC1) in DVBt mode. All received channels will
be stored, both Analog and Digital.
Fig 2
11
Fig 1
Fig 3
7. Menu Operation.
OSD Menu.
Press the LCD MENU button to display the main menu, Fig 4 will be displayed.
To select the other menu’s press the ► button and the menu’s will rotate in the
sequence :- Picture, Sound, Time, Setup, Lock, TV Setting.
To enter each menu press the ▼ button.
Picture Menu. (Fig 5).
To change the picture settings use the ▲/▼ buttons to select the feature and
then use the ◄/► buttons to change the levels.
Picture Mode. Select from Personal, Dynamic, Standard and Soft modes.
Personal is an adjustable location to set the picture settings to your choice.
Dynamic is set as a vibrant picture.
Standard is set as the average picture setting.
Soft is set as an easy viewing setting.
Contrast. Adjusts the ratio of dark to light.
Brightness. Adjusts the overall picture brightness.
Colour. Adjusts the colour saturation (colour depth).
Sharpness. Adjusts the clarity of the picture. If the signal is noisy (analog) then
this setting should be reduced to mask the noise.
Tint. Only available when using NTSC sourced material from the AV inputs
Colour Temperature. Adjusts the colour hardness, select between Normal,
Warm, Cold.
Aspect Ratio. Allows selection of screen sizes, this is the same function as
ZOOM on the remote control.
Noise Reduction. If the picture is noisy you may reduce the noise, but may
affect picture clarity.
PC Mode. (Fig 6).
The picture settings are different for PC Mode.
Auto Adjust. Adjusts the PC to the TV automatically. When selected the
picture may “jitter” and jump for a few seconds until the adjustments are
optimised.
H-Offset. Adjusts the picture horizontally.
V-Offset. Adjusts the picture vertically.
Size. Adjusts the height.
Phase. Adjusts the clock phase to minimise picture jitter.
Fig 4
Fig 6
Fig 5
12
7. Menu Operation.
Sound. (Fig 7)
Sound Mode. Select from :- Standard, Music, Movie, Sports and Personal.
Standard. Used for general viewing.
Music. Selected for enhanced music appreciation.
Movie. A more dynamic setting suitable for movie viewing.
Sports. Suitable for sports viewing.
Personal. Adjust for your personal listening.
Treble. Adjusts higher register frequencies.
Bass. Adjusts lower register frequencies.
Balance. Adjusts the level of the left and right speaker.
Auto Volume. When selected, this feature averages the sound levels, as
when adverts are shown the volume level is maintained.
Surround Sound. Select when viewing Movies or Sport for a more “Live”
feel. Not recommended for general viewing.
Time. (Fig 8).
Clock. Once the TV is tuned to a DVBt signal the clock time is automatically
set.
Sleep Time. This may be set as follows :- Off, 10 min, 20 min, 30 min, 60 min,
90 min, 120 min, 180 min, 240 min, Off.
Time Zone. The clock is able to be set to different world time zones, select the
time zone to suit.
Setup (Fig 9).
Language. English only available.
Country. UK. This is set in the Tuning Menu (Auto Tuning).
Hearing Impaired. (Digital TV only). Sets Subtitles when transmitted
Restore Factory Default. Restores all factory settings. The password is
required for this feature (0000).
Lock. (Fig 10).
Lock System. When this is selected you will be required to enter the
password. If this feature is selected all functions in the TV Setting menu are
locked.
Change Password. Enter a new 4 digit number and then enter again to
confirm. You MUST ensure this number is kept safe.
Block Program. When this is selected a list of programmes is displayed, use
the ▲/▼ to select the programme you wish to lock and press the Green
button. A lock will be displayed by that station. You may lock as many
programmes as you wish. To unlock re select the channel and press the
Green button, the lock will be removed. Each time a locked station is
requested you will be asked for the password. Entering the password will allow
that station to be viewed.
Parental Guidance. (DVBt only). You may set the parental guidance level
from :- OFF to 18. Thus if a selected station has unsuitable material, a
password will be required.
Fig 7
Fig 8
Fig 9
Fig 10
13
7. Menu Operation.
TV Setting. (Fig 11).
Auto Tuning. After initial installation it may be necessary to re install all the
stations. Select Auto Tuning and press OK. The sub menu (Fig 12) will be
shown. If using in the UK select Start with the ▼ button and press OK. If using
in another country, select the country using the ►/◄ buttons then select Start.
The TV will now tune the entire TV spectrum (see Fig 3).
When tuning is complete the TV will display the first channel (BBC1) in DVBt
mode. All received channels will be stored, both Analog and Digital.
The Analog stations are stored in station order i.e BBC1, BBC2 etc, however in
certain circumstances a station may be out of order, these stations will need to
be correctly ordered, see page 15.
As the number of areas in the UK switch to “Digital only” and “Analog” stations
are turned off, there is a possibility of the TV storing stations that may not be
the “Primary” station, this normally is shown by programmes being missing,
freezing or breaking up. To ensure you have the correct stations tuned in you
may need to refer to DTV Manual Tuning , (see next).
DTV Manual Tuning. (Fig 13).
It may be necessary to add more digital channels as they are provided by the
programme providers or manually tune stations for reasons (above).
Select DTV Manual Tuning and press Ok. Using the ►/◄ buttons select the
channel number of the multiplex (channel) required. The correct channel
numbers are available from the website www.dtg.org.uk
, and select
“Transmitters”. If you do not know which region you are in, go to website
www.digitaluk.co.uk
and Insert your postcode, you will then be shown which
region you are in.
At the bottom of the menu you will see a bar scale showing the quality of the
signals on that channel. Press OK to start the search. When complete the
menu will display the number of TV and Radio stations received.
ATV Manual Tuning. (Fig 14).
It may be necessary to add a channel for a TV game or similar without fully
retuning the TV.
If you are adding a TV game to be used on the aerial, unplug the TV aerial and
insert the game.
Ensure the game is turned on.
Using the SOURCE button select TV (Analog).
Select “Storage to” and use the ►/◄ buttons to select an un used location.
Select “Search” and press the ► or ◄ buttons. The TV will now search for the
TV game.
When found, and is satisfactory, press RED to SAVE.
Fig 12
Fig 11
Fig 13
Fig 14
14
7. Menu Operation.
Programme Edit. (Analog) (Fig 15).
Delete “Red” Should it be necessary to Delete a station, use the cursors to select
the station to be deleted. Press the RED button, this will put a RED marker next to
the station to be deleted, press RED again and the station will be deleted, to exit
delete press the Menu button. Note :- Any deleted station is removed from the
memory and must be retuned if required.
Rename. “Green”. To rename any channel, select the channel to be renamed
using the cursor buttons. Press the GREEN button. Using the ►/◄ buttons, select
the letter or digit to be changed, using the ▲/▼ buttons change the latter to the
required one. When the renaming is complete, press Menu to exit.
Move “Yellow”. If one of the stations has been incorrectly placed in the station
listing, you may move it to the correct position, i.e, BBC1, BBC2, ITV, Channel 4,
Channel 5. Using the cursor select the channel to be moved, press Yellow, move
the station to the new location and press OK, this will move the station to the new
location. To exit press LCD menu.
Skip “Blue”. You may wish to “Skip” certain channels when using the CH+/CH-
buttons. Use the cursor buttons to select the channel you wish to Skip. Press Blue
and a Blue dot will be shown next to the channel selected. To remove the skip
function, press the Blue button again.
When a channel has been selected to Skip, you still may select that channel with
the numeric buttons.
Fav. To add channels to your Favourite library, use the cursor buttons to select the
channel you wish to add. Press the FAV button. A “FAV” logo will be shown at the
side of the selected channel. To remove the channel from the Favourite library,
simply press the FAV button again.
Programme Edit. (Digital) (Fig 16).
Delete “Red” Should it be necessary to Delete a station, use the cursors to select
the station to be deleted. Press the RED button, this will put a RED marker next to
the station to be deleted, press RED again and the station will be deleted, to exit
delete press the Menu button. Note :- Any deleted station is removed from the
memory and must be retuned if required.
Move “Yellow”. If one of the stations has been incorrectly placed in the station
listing, you may move it to the correct position, i.e, BBC1, BBC2, ITV, Channel 4,
Channel 5. Using the cursor select the channel to be moved, press Yellow, move
the station to the new location and press OK, this will move the station to the new
location. To exit press LCD Menu
Skip “Blue”. You may wish to “Skip” certain channels when using the CH+/CH-
buttons. Use the cursor buttons to select the channel you wish to Skip. Press Blue
and a Blue dot will be shown next to the channel selected. To remove the skip
function, press the Blue button again.
When a channel has been selected to Skip, you still may select that channel with
the numeric buttons.
Fig 15
Fig 16
15
7. Menu Operation.
Using a CAM (Conditional Access Module) (CI Slot).
This feature allows the user to access digital terrestrial “pay per view”
channels. To use this facility a conditional access module (CAM) and
viewing card need to be obtained by subscribing to a pay channel company.
To insert the module. Ensure the TV is fully disconnected from the power
source.
Insert the CAM into the CI slot with the specification label facing away from
the rear of the TV (Fig 17). A positive stop should be felt if correctly fitted.
DO NOT force the module. ( Some modules may have a different
orientation).
To release the CAM push the button adjacent to the card and slide the
module away from the TV.
Reconnect the TV and switch on. Select DTV.
Insert your “Pay per view” card. “Do NOT touch the gold contacts”
Press the LCD Menu button and select TV Setting menu. Select CI
Information and press ►.
If everything is working ok you will see (Fig 18). Use the cursor buttons to
select Module Information and press OK. If things are working Ok you
should see the information as in Fig 19.
To check the card is working Ok select Smart Card Information and press
OK. Again if everything is ok you will see a list as Fig 20. If the information
is not present, remove the card reverse and reinsert. This information
should now be seen.
Exit the menu’s by pressing LCD menu and you are ready to view “Pay per
view” channels.
To obtain the CAM and pay per view card, these may be purchased from
good high street stores.
Fig 18
Fig 17
Fig 19
Fig 20
16
8. Teletext. (Analog) TV
Teletext is an information system broadcast by certain programme providers. It can provide
Subtitles for viewers hard of hearing. Weather, Travel information, games and many other
services.
Below is a description of the buttons associated with Teletext.
TEXT. Press to select Teletext, press again to exit.
MIX Press to mix the video information to the text page. Press again to turn off.
INDEX. Press to access the index page directly.
SIZE. Press to increase the text size in the top half of the page, press again to increase the text
size in the lower half of the page, press again to return to normal text size.
REVEAL. Press to reveal hidden answers in quizzes or puzzles.
SUBPAGE. Some text pages may contain several sub pages. To access these press this button
and then enter the page number using the numeric buttons. Press again to exit the feature.
COLOUR BUTTONS. Red, Green, Yellow, Blue are used as fast access buttons to pages of text
which are highlighted at the bottom of each text page.
HOLD. Press to hold any text page for easy viewing. Press again to return to normal.
8. Teletext. (Digital) TV (Fig 21)
Teletext is provided in the DVBt service and operates differently
from Analog TV
To enter TELETEXT, press the RED Button.
Use the ▲/▼ buttons to select the category you require and press
OK to enter. In each category there will be sub pages. Use the
▲/▼ buttons and OK button to select.
To exit Teletext. Press the TEXT button.
Fig 21
17
9. EPG (Electronic Programme Guide) (DVBt only).
An “Electronic Programme Guide” EPG is provided by
the programme providers. To access this press the
EPG button on the remote control.
The EPG provides programme information for the next
7 days. (Fig 22)
Press▲/▼to move up and down the list and ►/◄ to
move across the list.
To access any programme highlight and press OK
For more information about a programme press INFO.
To see programmes for the next day or further, press
the Yellow button and use the ►/◄ buttons to
increment the date.
Some boxes may be blank, the data may not available.
To exit the EPG, press the EPG button again.
Fig 22
10. DVD Operation
To select DVD press the SOURCE button and using the ▲/▼ buttons select DVD and press OK.
Insert a DVD disc with the label FACING FORWARD. Inserting a disc incorrectly may cause damage
to the Laser Optic. Do NOT place any damaged, dirty or disc not 12 cm in diameter into the loader.
The mechanism will draw the disc in automatically.
In most cases the DVD Title will be displayed together with a Disc menu. Select the feature required
with the cursor buttons and press PLAY/Pause.
To Pause play, press the Play/Pause button, press again to continue playing.
To Stop playing press Press once to pre stop, if the disc is not removed the player will continue
from the “stopped” point, when play is pressed. Pressing STOP again will fully stop the player.
11. DVD Setup Menu’s
To set the DVD section to your requirements a series of
menu’s are provided. With no disc in the player, press the
DVD SETUP button on the remote control, you will now see
menu (Fig 23).
The first item is General Setup Page.
Use the ▲/▼ buttons to select the item required and use the
► button to select the sub menu. In the sub menu use the
▲/▼ buttons to select the item required and OK to confirm.
Fig 23
18
11. DVD Setup Menu’s
TV Shape.
Some DVD discs have been authored in 4:3 aspect ratio format. To see the material in its original mode,
you may need to change the Aspect ratio.
Normal/PS (Pan& Scan).
Black edges left and right will be seen.
Normal/LB (Letterbox).
Top and bottom of the screen may be black.
Wide 16:9 (Widescreen).
Full width picture but may have black areas top and bottom.
OSD Language.
Select the OSD Language (English is default.
Last Memory. ON/OFF.
You may wish the player to remember where it finished playing a disc and then remove the disc. When you
stop the disc, the player will automatically remember the point it finished playing. When the disc is re
inserted the player will continue from the same point.
Audio Setup Page. (Fig 24)
Down mix is defaulted to Stereo
Preference page. (Fig 25).
AUDIO. Select Audio using the ▲/▼ buttons. The languages
available will be shown in the right column. Select the required
language using the ► and /▼ buttons. Default is English. If the
disc has that language it will play the soundtrack in that
language.
SUBTITLES. Select Subtitle using the ▲/▼ buttons. The
languages available will be shown in the right column. Select
the required language using the ► and /▼ buttons. Default is
English. If the disc has that language it will display the Subtitles
in that language
DISC MENU. Select Disc menu using the ▲/▼ buttons. The
languages available will be shown in the right column. Select
the required language using the ► and /▼ buttons. Default is
English. If the disc has that language it will display the menu in
that language
PARENTAL. Select Parental using the ▲/▼ buttons. Enter the
list using the ► button.
Set the level using the ▲/▼ buttons and press OK. You will be
asked for the password (136900). Default is ADULT.
PASSWORD. Select Password using the ▲/▼ buttons. Select
Change using the ► button and OK. Put in the old password.
You must then put in the new password twice and press OK.
Make a note of the new password and keep safe.
DEFAULT. Selecting Default will reset to the factory settings all
your personal settings in the DVD setup menu.
Fig 24
Fig 25
19
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23

Akura APLDVD3221W-HDID- User manual

Akura
Brand
Akura
Model
APLDVD3221W-HDID-
Category
LCD TVs
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents