2. Barco
  3. RLM-W8
RLM-W8

Barco RLM-W8 Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Barco RLM-W8 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What's the purpose of the safety cable installation on the Barco RLM-W8 multifunctional frame?
    What's the scope of the safety cable installation?
    How do I obtain the safety cable?
    What is the recommended procedure for installing the safety cable?
    What approvals were granted for this modification?
Barco service bulletin
Serial Number: 1005
Date: 30/11/2011
Product: RLM W-series multifunctional
frame
Priority code*: A
A.
”Must” modification, Barco will provide the necessary components to perform this modification
at no charge.
B.
Improves the reliability of the product.
C.
Improves the general working conditions of t he pr odu ct.
D.
For information only.
1. INSTALLATION OF SAFETY CABLE ON RLM
W-SERIES MULTIFUNCTIONAL FRAME
1.1 General
Situation
The inner assembly of the RLM W-series multifunctional frame is mounted to the base frame
with 2 bolts and 1 pillow block bearing. After transporting the frame upside down (with a
RLM projector mounted in it) a few cases showed damage to the pillow block bearing. To
exclude all possible safety issues a safety cable must be installed on the frame.
Objective
Improving the safety of the RLM W-series multifunctional frame.
Solution
Install a safety cable on the RLM W -series multifunctional frame as described in the proce-
dure below. This adds an extra fixation point between the inner as sembly and the base-
frame.
The safety cable can be ordered free of charge at Barco. Ordering code B364409K.Contact
our technical support team via the following web site w
ww.barco.com/esupport.Priorto
use the RLM W-series multifunctional frame ensure that the instructions in the included
chapter "Installing the s afety cable on the multifunctional frame", page 2 , are precisely
executed.
Scope
All RLM W -series multifunctional frames (product number R9899700)inthefield with pro-
duction date before D ecember 2011. The multifunctional frame can be used for the Barco
RLM W6 projector (R9006300) and Barco RLM W8 projector (R9006310).
Barco nv Enterta inment Div i s io n
Noordlaan 5, B-8520 Kuurne
www.barco.com
Page 1 of 3
Barco service bulletin
1.2 Approvals
Modification approved by:
Escalation M anager
R&D Director
Product Manager Quality Manager
If you should have any more questions, or remarks, please do not hesitate to contact our
technical support team via the f ollowing web site w
ww.Barco.com/esupport.
1.3 Installing the safety ca ble on the multifunctional fra me
How to install the safety cable on the multifunctional frame?
1. Turn the multifunctional frame with RLM projector on its side (if possible).
2. Install the safety cable (reference 1, image 1-1) around the inner assembly and the
baseframe as illustrated. M ake sure the inner assembly and the basefram
e are secured
to each other with the safety cable. The 2 cable ends must have an overlap of 10 cm (4
in.).
1
1
Image 1-1
3. Secure the safety cable with 2 cable clamps as illustrated (reference 2, image 1-2). Leave
a distance of 5 cm (2 in.) between each clamp. Tighten the 2 screws of each cable clamp.
InfoT: 1005
Page 2 of 3
Kurt De Mesel
Ignace Rombaut
Alexis Skatchkoff
Nancy Rossey
p.p. Stijn Cuvelier
30 Nov 2011
30 Nov 2011
30 Nov 2011
30 Nov 2011
Barco service bulletin
2
2
Image 1-2
Page 3 of 3 InfoT: 1005
/