2
The provides a discrete connection for your DSL modem and a
convenient way to filter the data noise out of all the phones in the house.
Additionally, the P-0411 offers some of the best telephone surge technology
available.
P-0411
!
!
!
!
Active line and surge LED indicators
110 and RJ-45 inputs and outputs
Self-healing fuse stops surges without destroying itself
RJ-31x security system connection
Telephone
No additional filters are need
at the telephone locations.
Green Ring LED flashes when phone rings.
Switchable RJ-31x connection for security system line seizure.
Bypass mode removes the security system from the phone circuit.
RJ-45 and 110 input and output connectors are in parallel:
the installer may use whichever is more convenient.
Red Fault LED only lights if numerous severe surge events
have occurred and the unit no longer provides protection.
Computer
G-Kit 7
(wall plate kit)
ADSL
Modem
C-0432
(telephone distribution)
(data
C-0508
distribution)
CVHANNEL ISION
TM
Central
C-0432
INPUT
OUTPUT
SERVICE
From Telco
Ring Fault
1
2
3
4
To Phones
CO Lines
C
V
HANNEL
ISION
TM
Model
P-0411
ADSL Filter / Surge Suppressor
From Telco To Phones
DSL Modem
Security system
Bypass Normal
TIA568A TIA568ARJ-31x
From
Telephone
Company
CV
HANNEL ISION
TM
Central
C-0508
3
Features:
LED indicators for active line and surge damage notification
ADSL filter on line 1 and discrete modem output connection
Protects against phone line transients caused by lighting,
power cross, and other conditions.
Exceeds FCC Part 68 A and Type B lightning immunity
requirements.
Bellcore 1 compliant (GR-1089) (2500V@500amps)
Easily connects to phone distribution modules using
: C-0408 or C-0409.
Snaps easily into Channel Vision Central enclosures and
the new PRO-series P-1300.
jumper
cables
Suggested wiring:
CAT5 wire from distribution to wallplate
CAT5 interconnects (models C-0408 and C-0409)
Punch down as many as 4 incoming telephone lines on the
input 110 punch-down as shown. Use a 110 punch-down
tool to seat and trim all wires.
nsta
at
on:
Note position of cutter