Crestron DHDC-BNCVIS User manual

DHDC-BNCVIS
Crestron
Brand
Crestron
Model
DHDC-BNCVIS
Type
User manual

This manual is also suitable for

DVPHD (3 BNC) Input
Connectors: DHDC-VI
Introduction
This Operations Guide describes the video input connectors on the DHDC-RGBVI,
DHDC-SDIVI, DHDC-QMVI, DHDC-BNCVID and DHDC-BNCVIS. For the
purposes of this document, these connectors are referred to as the 3 BNC input
connectors on one of the DHDC-VIs. The 3 BNC inputs provide component,
composite and S-video input for the DVPHD High Definition Digital Video
Processor.
Features and Functions
• Supports NTSC and PAL video
• Dynamically configurable input signal type
• Auto-detecting multi-format video input
NOTE: The DHDC-VI is not field upgradeable.
Specifications
Specifications for the DHDC-VI are listed in the following table.
DHDC-VI Specifications
SPECIFICATION DETAILS
Input Signal Types
Auto-detecting component, S-video, and
composite video
Input Formats
NTSC/PAL interlaced video up to 1080i and
non-interlaced up to 720p.
Input Resolutions 480i, 576i, 480p, 576p, 720p, 1080i
Location of Connectors
1
1
Crestron Electronics, Inc. Operations Guide – DOC. 6570B
15 Volvo Drive Rockleigh, NJ 07647 (2017775)
Tel: 888.CRESTRON 05.08
Fax: 201.767.7576 Specifications subject to
www.crestron.com change without notice.
DVPHD (3 BNC) Input Connectors Crestron DHDC-VI
2 • DVPHD (3 BNC) Input Connectors: DHDC-VI Operations Guide – DOC. 6570B
Location of Connectors (Continued)
1
1
1
Connectors
# CONNECTORS DESCRIPTION
1
(3) BNC female;
Signal Types: Dynamically configurable
under system control as (1) auto-detecting
component (YP
b
P
r
), S-video (Y/C), or
composite video input;
Formats: 480i (NTSC), 576i (PAL), 480p,
576p, 720p, 1080i;
Input Levels: 0.5 to 1.5 V
p-p
with built-in DC
restoration;
Input Impedance: 75 ohms;
Horizontal Frequency: 15 to 67.5 kHz;
Vertical Frequency: 25 to 60 Hz
Further Inquiries
If you cannot locate specific information or have questions after reviewing this sheet,
please take advantage of Crestron's award winning customer service team by calling
Crestron at 1-888-CRESTRON [1-888-273-7876].
You can also log onto the online help section of the Crestron website
(http://www.crestron.com/onlinehelp
) to ask questions about Crestron products.
First-time users will need to establish a user account to fully benefit from all
available features.
  • Page 1 1
  • Page 2 2

Crestron DHDC-BNCVIS User manual

DHDC-BNCVIS
Crestron
Brand
Crestron
Model
DHDC-BNCVIS
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents