2. Crestron
  3. DHDC-BNCVID
DHDC-BNCVID

Crestron DHDC-BNCVID, DHDC-BNCVIS, DHDC-QMVI, DHDC-RGBVI, DHDC-SDIVI, DVPHD, DVPHD-GB User manual

  • Hello! I am an AI chatbot trained to assist you with the Crestron DHDC-BNCVID User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
DVPHD (3 BNC) Input
Connectors: DHDC-VI
Introduction
This Operations Guide describes the video input connectors on the DHDC-RGBVI,
DHDC-SDIVI, DHDC-QMVI, DHDC-BNCVID and DHDC-BNCVIS. For the
purposes of this document, these connectors are referred to as the 3 BNC input
connectors on one of the DHDC-VIs. The 3 BNC inputs provide component,
composite and S-video input for the DVPHD High Definition Digital Video
Processor.
Features and Functions
• Supports NTSC and PAL video
• Dynamically configurable input signal type
• Auto-detecting multi-format video input
NOTE: The DHDC-VI is not field upgradeable.
Specifications
Specifications for the DHDC-VI are listed in the following table.
DHDC-VI Specifications
SPECIFICATION DETAILS
Input Signal Types
Auto-detecting component, S-video, and
composite video
Input Formats
NTSC/PAL interlaced video up to 1080i and
non-interlaced up to 720p.
Input Resolutions 480i, 576i, 480p, 576p, 720p, 1080i
Location of Connectors
1
1
Crestron Electronics, Inc. Operations Guide – DOC. 6570B
15 Volvo Drive Rockleigh, NJ 07647 (2017775)
Tel: 888.CRESTRON 05.08
Fax: 201.767.7576 Specifications subject to
www.crestron.com change without notice.
DVPHD (3 BNC) Input Connectors Crestron DHDC-VI
2 • DVPHD (3 BNC) Input Connectors: DHDC-VI Operations Guide – DOC. 6570B
Location of Connectors (Continued)
1
1
1
Connectors
# CONNECTORS DESCRIPTION
1
(3) BNC female;
Signal Types: Dynamically configurable
under system control as (1) auto-detecting
component (YP
b
P
r
), S-video (Y/C), or
composite video input;
Formats: 480i (NTSC), 576i (PAL), 480p,
576p, 720p, 1080i;
Input Levels: 0.5 to 1.5 V
p-p
with built-in DC
restoration;
Input Impedance: 75 ohms;
Horizontal Frequency: 15 to 67.5 kHz;
Vertical Frequency: 25 to 60 Hz
Further Inquiries
If you cannot locate specific information or have questions after reviewing this sheet,
please take advantage of Crestron's award winning customer service team by calling
Crestron at 1-888-CRESTRON [1-888-273-7876].
You can also log onto the online help section of the Crestron website
(http://www.crestron.com/onlinehelp
) to ask questions about Crestron products.
First-time users will need to establish a user account to fully benefit from all
available features.
/