Poly QSX Quick start guide

Category
Networking
Type
Quick start guide

Polycom QSX is a powerful and versatile multimedia system that enables high-quality video conferencing, data sharing, and content collaboration. With its advanced features, QSX delivers an immersive and engaging communication experience for businesses and organizations of all sizes. Key capabilities include:

  • Multi-party video conferencing with support for up to 1080p resolution and H.264 video codec.
  • Content sharing and collaboration tools, including real-time annotation, document sharing, and interactive whiteboarding.
  • Seamless integration with a variety of video conferencing platforms and codecs, including Polycom, Cisco, and Microsoft.

Polycom QSX is a powerful and versatile multimedia system that enables high-quality video conferencing, data sharing, and content collaboration. With its advanced features, QSX delivers an immersive and engaging communication experience for businesses and organizations of all sizes. Key capabilities include:

  • Multi-party video conferencing with support for up to 1080p resolution and H.264 video codec.
  • Content sharing and collaboration tools, including real-time annotation, document sharing, and interactive whiteboarding.
  • Seamless integration with a variety of video conferencing platforms and codecs, including Polycom, Cisco, and Microsoft.
IOIOIO
LAN
Power connector
Connect to power
supply
POTS module
connector
Connect to conference
phone interface
module (if phone is
used)
VGA output
Connect to VGA
monitor or
projector
VGA input
Connect to
content controller
or computer
LAN connector
Connect to LAN
8-wire conference
phone connector
Connect to conference
phone (if phone is
used.)
Conference link
connector
Connect to SoundStation
VTX 1000 only (if phone is
used.)
RS-232 connector
Use to reset forgotten
password or set a static
IP address (optional)
Audio connectors
Reserved for future
use (inactive)
The QSX
System Quick Start Guide
Unit Overview
4
Included in the Box
QSX 400
* Content Controller with VGA Cable
* 3 foot VGA Extension
* Straight-through Serial Cable
QSX 300
(for use with SoundStation VTX 1000)
* VGA Cable
* Straight-through Serial Cable
* Conference Link Cable
For information about configuring the QSX system, see the QSX Administration Guide.
For the latest product information, see the Release Notes available at www.polycom.com/resource_center.
For product support, visit the Polycom Support Center at www.polycom.com/support.
Cable Bag
* LAN Cable
* Power Cord
* Power Supply
* 8-Wire Cable for phone console
* Mounting Brackets
1725-45077-001/B
Connect Conference Phone (optional)
2
Connect SoundStation
, SoundStation Premier
, SoundStation2
or
VoiceStation
conference phones
Connect Power Supply and LAN Cable
Connect VGA Cables
Connect the QSX
System
1
QSX 300
QSX 400
Connection to projector
or display. (Not included)
IOIOIO
LAN
IOIOIO
LAN
IOIOIO
LAN
100V - 120V
220V - 240V
VGA Extension
Plug red & white plugs into
red & white jacks
©2005 Polycom, Inc. All rights reserved. Polycom, the Polycom logo design, SoundStation, and SoundStation Premier are registered trademarks and
QSX, VoiceStation, SoundStation2, SoundStation VTX 1000, and the industrial design of SoundStation are trademarks of Polycom, Inc. in the U.S. and various countries.
Set a Static IP Address* (optional)
A. Via QSX Web Admin Page
3
Connect a SoundStation VTX 1000
conference phone
(optional)
2
To Get to QSX Web Admin Page
1. Once QSX is connected, hit the Info button on
Content Controller.
2. If screen shows an IP address in the “My IP
field, go to Step 3. Otherwise, proceed to
next page.
3. Open your internet browser and type in the
IP address, followed by “/admin.htm
(e.g. http//140.242.16.45/admin.htm).
4. Click on LAN properties. Select “Enter IP
Address Manually. After typing IP Address,
Subnet Mask Gateway and DNS information,
click the update button.
* By default QSX is DHCP enabled. If your
network has a DHCP server, an IP address
will automatically be assigned to the QSX.
IOIOIO
LAN
8-Wire Cable
Conference Link Cable
Open Web Browser and Type IP Address in Browser Window
followed by admin.htm (e.g.-http//140.242.16.45/admin.htm)
4. Configure Static IP Address
a. Enter “2”, IP Address, Subnet Mask,
Gateway and DNS
b. Enter “Y” and the system will reboot.
5. Restart QSX by unplugging and re-plugging the QSX power cord
3. Connect to QSX
a. Open Hyperterminal, enter a name
(e.g.-QSX) and click OK.
b. Select COM1 (or the actual port) and
click OK.
c. Select bitrate of 115200 and click OK.
d. The status bar at the bottom of the
screen should say “Connected”.
e. Enter “ip and hit return to see the IP
configuration page.
Access QSX Web Admin Page (optional)
4
3B. Via Hyperterminal
IOIOIO
LAN
1. Plug a straight-through serial cable from
your PC to the QSX
2. Start Hyperterminal
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Poly QSX Quick start guide

Category
Networking
Type
Quick start guide

Polycom QSX is a powerful and versatile multimedia system that enables high-quality video conferencing, data sharing, and content collaboration. With its advanced features, QSX delivers an immersive and engaging communication experience for businesses and organizations of all sizes. Key capabilities include:

  • Multi-party video conferencing with support for up to 1080p resolution and H.264 video codec.
  • Content sharing and collaboration tools, including real-time annotation, document sharing, and interactive whiteboarding.
  • Seamless integration with a variety of video conferencing platforms and codecs, including Polycom, Cisco, and Microsoft.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI