Polycom QSX 300 Software Release Notes

QSX

Software Version 2.0 Release Notes

Date: February 17, 2006

Specific Release version: 2.00.07

Subject: Software Release Notes describing changes from Software Version 1.0 to Software

Version 2.0

New features

This release includes support for use in a wider number of environments.

The features allow you to use the QSX without having to connect to a Polycom conference phone if

you want to share content with web viewers.

This release also improves the interoperability between the QSX and video (specifically VSX8000,

VSX7000e and VSX7000s with Visual Content) as well as with MGC.

Please purchase the QSX 300 or QSX 400 version 2.0. Alternately, you can download the Version

2.0 software from the Polycom website to upgrade an existing unit with Version 1.0 code.

Software Improvements/Bug Fixes

1. No POTS phone required in Stand Alone mode

2. Reset a meeting session with new password by holding Info Button for 4 seconds (if the

QSX is not in Send mode).

3. Bandwidth control down to 128kbps.

4. Preview frame rate up to 20 frames per second (fps).

5. Hold Share Button during boot-up to force the QSX to DHCP mode.

6. No Info Screen popup for joined party.

7. Info Screen display timeout is 2 min.

8. Support resolution up to 12x10

9. Input scaling for web viewer and QSX connections

10. Continue receiving content when web viewers cannot be redirected to the new presenting

device

11. MGC dial-out support

12. Added IP dialing to a MCU from VTX after VTX makes POTS call.

This manual is also suitable for

Download PDF