Encore ENL832-TX-EN Datasheet
- Category
- Networking cards
- Type
- Datasheet
ENL832-TX-EN
Encore 32 bit LAN PCI Card
Encore ENL832-TX-EN is an internal Auto switching 10/100 Mbps Fast Ethernet
PCI interface LAN Card. ENL832-X-EN uses advanced IC Plus single-chip Fast
Ethernet solution with complete set of industry standard features for high-speed
Internet access. ENL832-TX-EN offers easy installation and cost-effective
connection for SOHO and residential users.
Features:
‧ 32-bit PCI V2.2 and ACPI Rev. 1.0 compliant
‧ Plug and play compatible for easy installation and configuration
‧ Supports 10Mbps and 100Mbps operation
‧ Friendly GUI configuration and management software
‧ Supports Half/Full duplex capability
Specifications:
Data Transfer Rates
• 10 Mbps and 100 Mbps With two 2K byte independent receive and
transmit FIFO’s
Protocol
• IEEE 802.3 10 Base-T
• IEEE 802.3u 1000 Base-TX
• IEEE 802.3x Full Duplex Flow Control
Power Consumption
• 1.5 Watts
Interface
• PCI Specification 2.2 Compliant
Connector
• RJ-45 X 1
Dimensions (Approximate)
• 119 mm (L) x 35.8 mm (W) x 16 mm (H)
Net Weight (Approximate)
• 50 grams
Operating Temperature
• 0°C ~ 80°C
Supported Operating Systems
• Windows® 98SE, ME, 2000, XP, NT 4.0,
• Linux
• MAC 10.x
• Novell
• SCO 5
• Solaris
• Unixware 7
Minimum System Requirements
• Pentium Compatible Processor 200 MHz and above, 32 MB RAM and above, 30
MB available HDD space, CDROM Drive (fro driver installation) and 1 availabel
PCI slot
Regulations
• FCC Part 15 Class B, CE
-
1
-
2
Encore ENL832-TX-EN Datasheet
- Category
- Networking cards
- Type
- Datasheet
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI