Avaya Troubleshooting Routers Troubleshooting guide

Part No. 117379-A Rev. A

September 1997

BayRS Version 12.00

Site Manager Software Version 6.00

Troubleshooting Routers

ii

117379-A Rev. A

4401 Great America Parkway 8 Federal Street

Santa Clara, CA 95054 Billerica, MA 01821

The information in this document is subject to change without notice. The statements, conﬁgurations, technical data,

and recommendations in this document are believed to be accurate and reliable, but are presented without express or

implied warranty. Users must take full responsibility for their applications of any products speciﬁed in this document.

The information in this document is proprietary to Bay Networks, Inc.

The software described in this document is furnished under a license agreement and may only be used in accordance

with the terms of that license. A summary of the Software License is included in this document.

Trademarks

ACE, AFN, AN, BCN, BLN, BN, BNX, CN, FN, FRE, GAME, LN, Optivity, PPX, Quick2Conﬁg, and Bay Networks

are registered trademarks and Advanced Remote Node, ANH, ARN, ASN, Bay•SIS, BayStack, BayStream, BCNX,

BLNX, EZ Install, EZ Internetwork, EZ LAN, IP AutoLearn, PathMan, RouterMan, SN, SPEX, Switch Node,

System 5000, Bay Networks Press, and the Bay Networks logo are trademarks of Bay Networks, Inc.

Microsoft, MS, MS-DOS, Win32, Windows, and Windows NT are registered trademarks of Microsoft Corporation.

All other trademarks and registered trademarks are the property of their respective owners.

Restricted Rights Legend

Use, duplication, or disclosure by the United States Government is subject to restrictions as set forth in subparagraph

(c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013.

Notwithstanding any other license agreement that may pertain to, or accompany the delivery of, this computer

software, the rights of the United States Government regarding its use, reproduction, and disclosure are as set forth in

the Commercial Computer Software-Restricted Rights clause at FAR 52.227-19.

Statement of Conditions

In the interest of improving internal design, operational function, and/or reliability, Bay Networks, Inc. reserves the

right to make changes to the products described in this document without notice.

Bay Networks, Inc. does not assume any liability that may occur due to the use or application of the product(s) or

circuit layout(s) described herein.

reserved. Redistribution and use in source and binary forms of such portions are permitted, provided that the above

copyright notice and this paragraph are duplicated in all such forms and that any documentation, advertising materials,

and other materials related to such distribution and use acknowledge that such portions of the software were

developed by the University of California, Berkeley. The name of the University may not be used to endorse or

promote products derived from such portions of the software without speciﬁc prior written permission.

SUCH PORTIONS OF THE SOFTWARE ARE PROVIDED “AS IS” AND WITHOUT ANY EXPRESS OR

IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

In addition, the program and information contained herein are licensed only pursuant to a license agreement that

contains restrictions on use and disclosure (that may incorporate by reference certain limitations and notices imposed

by third parties).

117379-A Rev. A

iii

Bay Networks, Inc. Software License Agreement

NOTICE:

Please carefully read this license agreement before copying or using the accompanying software or

installing the hardware unit with pre-enabled software (each of which is referred to as “Software” in this Agreement).

BY COPYING OR USING THE SOFTWARE, YOU ACCEPT ALL OF THE TERMS AND CONDITIONS OF THIS

LICENSE AGREEMENT. THE TERMS EXPRESSED IN THIS AGREEMENT ARE THE ONLY TERMS UNDER

WHICH BAY NETWORKS WILL PERMIT YOU TO USE THE SOFTWARE. If you do not accept these terms and

conditions, return the product, unused and in the original shipping container, within 30 days of purchase to obtain a

credit for the full purchase price

1. License Grant.

Bay Networks, Inc. (“Bay Networks”) grants the end user of the Software (“Licensee”) a personal,

nonexclusive, nontransferable license: a) to use the Software either on a single computer or, if applicable, on a single

authorized device identiﬁed by host ID, for which it was originally acquired; b) to copy the Software solely for backup

purposes in support of authorized use of the Software; and c) to use and copy the associated user manual solely in

support of authorized use of the Software by Licensee. This license applies to the Software only and does not extend

to Bay Networks Agent software or other Bay Networks software products. Bay Networks Agent software or other

Bay Networks software products are licensed for use under the terms of the applicable Bay Networks, Inc. Software

License Agreement that accompanies such software and upon payment by the end user of the applicable license fees

for such software.

2. Restrictions on use; reservation of rights.

The Software and user manuals are protected under copyright laws.

Bay Networks and/or its licensors retain all title and ownership in both the Software and user manuals, including any

revisions made by Bay Networks or its licensors. The copyright notice must be reproduced and included with any

copy of any portion of the Software or user manuals. Licensee may not modify, translate, decompile, disassemble, use

for any competitive analysis, reverse engineer, distribute, or create derivative works from the Software or user

manuals or any copy, in whole or in part. Except as expressly provided in this Agreement, Licensee may not copy or

transfer the Software or user manuals, in whole or in part. The Software and user manuals embody Bay Networks’ and

its licensors’ conﬁdential and proprietary intellectual property. Licensee shall not sublicense, assign, or otherwise

disclose to any third party the Software, or any information about the operation, design, performance, or

implementation of the Software and user manuals that is conﬁdential to Bay Networks and its licensors; however,

Licensee may grant permission to its consultants, subcontractors, and agents to use the Software at Licensee’s facility,

provided they have agreed to use the Software only in accordance with the terms of this license.

3. Limited warranty.

Bay Networks warrants each item of Software, as delivered by Bay Networks and properly

installed and operated on Bay Networks hardware or other equipment it is originally licensed for, to function

substantially as described in its accompanying user manual during its warranty period, which begins on the date

Software is ﬁrst shipped to Licensee. If any item of Software fails to so function during its warranty period, as the sole

remedy Bay Networks will at its discretion provide a suitable ﬁx, patch, or workaround for the problem that may be

included in a future Software release. Bay Networks further warrants to Licensee that the media on which the

Software is provided will be free from defects in materials and workmanship under normal use for a period of 90 days

from the date Software is ﬁrst shipped to Licensee. Bay Networks will replace defective media at no charge if it is

returned to Bay Networks during the warranty period along with proof of the date of shipment. This warranty does not

apply if the media has been damaged as a result of accident, misuse, or abuse. The Licensee assumes all responsibility

for selection of the Software to achieve Licensee’s intended results and for the installation, use, and results obtained

from the Software. Bay Networks does not warrant a) that the functions contained in the software will meet the

Licensee’s requirements, b) that the Software will operate in the hardware or software combinations that the Licensee

may select, c) that the operation of the Software will be uninterrupted or error free, or d) that all defects in the

operation of the Software will be corrected. Bay Networks is not obligated to remedy any Software defect that cannot

be reproduced with the latest Software release. These warranties do not apply to the Software if it has been (i) altered,

except by Bay Networks or in accordance with its instructions; (ii) used in conjunction with another vendor’s product,

resulting in the defect; or (iii) damaged by improper environment, abuse, misuse, accident, or negligence. THE

FOREGOING WARRANTIES AND LIMITATIONS ARE EXCLUSIVE REMEDIES AND ARE IN LIEU OF ALL

OTHER WARRANTIES EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Licensee is responsible for the security of

iv

117379-A Rev. A

its own data and information and for maintaining adequate procedures apart from the Software to reconstruct lost or

altered ﬁles, data, or programs.

4. Limitation of liability.

IN NO EVENT WILL BAY NETWORKS OR ITS LICENSORS BE LIABLE FOR ANY

COST OF SUBSTITUTE PROCUREMENT; SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL

DAMAGES; OR ANY DAMAGES RESULTING FROM INACCURATE OR LOST DATA OR LOSS OF USE OR

PROFITS ARISING OUT OF OR IN CONNECTION WITH THE PERFORMANCE OF THE SOFTWARE, EVEN

IF BAY NETWORKS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT

SHALL THE LIABILITY OF BAY NETWORKS RELATING TO THE SOFTWARE OR THIS AGREEMENT

EXCEED THE PRICE PAID TO BAY NETWORKS FOR THE SOFTWARE LICENSE.

5. Government Licensees.

This provision applies to all Software and documentation acquired directly or indirectly

by or on behalf of the United States Government. The Software and documentation are commercial products, licensed

on the open market at market prices, and were developed entirely at private expense and without the use of any U.S.

Government funds. The license to the U.S. Government is granted only with restricted rights, and use, duplication, or

disclosure by the U.S. Government is subject to the restrictions set forth in subparagraph (c)(1) of the Commercial

Computer Software––Restricted Rights clause of FAR 52.227-19 and the limitations set out in this license for civilian

agencies, and subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause of DFARS

252.227-7013, for agencies of the Department of Defense or their successors, whichever is applicable.

6. Use of Software in the European Community.

This provision applies to all Software acquired for use within the

European Community. If Licensee uses the Software within a country in the European Community, the Software

Directive enacted by the Council of European Communities Directive dated 14 May, 1991, will apply to the

examination of the Software to facilitate interoperability. Licensee agrees to notify Bay Networks of any such

intended examination of the Software and may procure support and assistance from Bay Networks.

7. Term and termination.

This license is effective until terminated; however, all of the restrictions with respect to

Bay Networks’ copyright in the Software and user manuals will cease being effective at the date of expiration of the

Bay Networks copyright; those restrictions relating to use and disclosure of Bay Networks’ conﬁdential information

shall continue in effect. Licensee may terminate this license at any time. The license will automatically terminate if

Licensee fails to comply with any of the terms and conditions of the license. Upon termination for any reason,

Licensee will immediately destroy or return to Bay Networks the Software, user manuals, and all copies. Bay

Networks is not liable to Licensee for damages in any form solely by reason of the termination of this license.

8. Export and Re-export.

Licensee agrees not to export, directly or indirectly, the Software or related technical data

or information without ﬁrst obtaining any required export licenses or other governmental approvals. Without limiting

the foregoing, Licensee, on behalf of itself and its subsidiaries and afﬁliates, agrees that it will not, without ﬁrst

obtaining all export licenses and approvals required by the U.S. Government: (i) export, re-export, transfer, or divert

any such Software or technical data, or any direct product thereof, to any country to which such exports or re-exports

are restricted or embargoed under United States export control laws and regulations, or to any national or resident of

such restricted or embargoed countries; or (ii) provide the Software or related technical data or information to any

military end user or for any military end use, including the design, development, or production of any chemical,

nuclear, or biological weapons.

9. General.

If any provision of this Agreement is held to be invalid or unenforceable by a court of competent

jurisdiction, the remainder of the provisions of this Agreement shall remain in full force and effect. This Agreement

will be governed by the laws of the state of California.

Should you have any questions concerning this Agreement, contact Bay Networks, Inc., 4401 Great America Parkway,

P.O. Box 58185, Santa Clara, California 95054-8185.

LICENSEE ACKNOWLEDGES THAT LICENSEE HAS READ THIS AGREEMENT, UNDERSTANDS IT, AND

AGREES TO BE BOUND BY ITS TERMS AND CONDITIONS. LICENSEE FURTHER AGREES THAT THIS

AGREEMENT IS THE ENTIRE AND EXCLUSIVE AGREEMENT BETWEEN BAY NETWORKS AND

LICENSEE, WHICH SUPERSEDES ALL PRIOR ORAL AND WRITTEN AGREEMENTS AND

COMMUNICATIONS BETWEEN THE PARTIES PERTAINING TO THE SUBJECT MATTER OF THIS

AGREEMENT. NO DIFFERENT OR ADDITIONAL TERMS WILL BE ENFORCEABLE AGAINST BAY

NETWORKS UNLESS BAY NETWORKS GIVES ITS EXPRESS WRITTEN CONSENT, INCLUDING AN

EXPRESS WAIVER OF THE TERMS OF THIS AGREEMENT.

117379-A Rev. A

v

Contents

About This Guide

Before You Begin .............................................................................................................xvi

Conventions ....................................................................................................................xvii

Acronyms .......................................................................................................................xviii

Ordering Bay Networks Publications ..............................................................................xxii

Bay Networks Customer Service ...................................................................................xxiii

How to Get Help ............................................................................................................xxiii

Chapter 1

Introduction

Preventing Problems ......................................................................................................1-1

Reading the Release Notes and Relevant Documentation ......................................1-2

Minimizing Disruption When Installing New Software ..............................................1-2

Selecting the Proper Tool for Conﬁguring a Router ..................................................1-2

Saving Your Conﬁguration Changes .........................................................................1-3

Backing Up Your Files ..............................................................................................1-3

Maintaining Consistent Files in Multiple Flash Memory Cards ................................1-3

Handling Flash Memory Cards to Prevent Static Damage .......................................1-4

Responding to a Failed prom Command .................................................................1-4

Preparing to Troubleshoot ...............................................................................................1-4

Getting Acquainted with the Troubleshooting Tools ..................................................1-4

Using the System Log to Display Event Messages ...........................................1-5

Displaying and Changing Conﬁguration Settings and Statistics ......................1-10

Using the ping Command ................................................................................1-20

Using the Packet Capture Tool .........................................................................1-20

Using Inbound Telnet to Access the Technician Interface ................................1-21

Taking a Snapshot of Your Network ........................................................................1-22

Documenting Each Step ...............................................................................................1-23

Performing One Corrective Task at a Time ...................................................................1-24

vi

117379-A Rev. A

Chapter 2

Determining the Scope of a Problem

Chapter 3

Troubleshooting an Operational Problem

Damaged Router ............................................................................................................3-2

Power Problem ...............................................................................................................3-2

Blown Fuse .....................................................................................................................3-2

LEDs Are Off ..................................................................................................................3-3

Router Won’t Boot ..........................................................................................................3-3

Checking the Boot PROMs .............................................................................................3-6

Making Sure the Router Software Image Is Correct .......................................................3-6

Making Sure All Slots Use the Same Router Software Image and Conﬁguration File ...3-6

Verifying That the Router Software Images in Each Processor Match .....................3-7

Verifying That the Conﬁguration Files in Each Processor Match .............................3-9

Lost Password (BN Routers) ........................................................................................3-10

No Space Left on Memory Card ...................................................................................3-11

Memory or Buffer Problem ...........................................................................................3-12

Bad Forward Receive Buffer Checksum Errors ............................................................3-17

Finding the Slot That Sent a Bad Backplane BofL Packet .....................................3-18

Finding the Slot That Sent a Bad Packet That Was Not a BofL Packet ..................3-19

Fault Message ..............................................................................................................3-20

Chapter 4

Troubleshooting a Physical Media Problem

Making Sure the Link Module Is Working .......................................................................4-1

Determining the Media-Speciﬁc State ............................................................................4-1

Troubleshooting the Cable Connection ...........................................................................4-3

Chapter 5

Troubleshooting a Data Link Layer Problem

Troubleshooting an ATM Connection ..............................................................................5-2

Interface Problems ...................................................................................................5-2

Dropped Frames ................................................................................................5-5

ATM VC Mod Failed Message ...........................................................................5-5

117379-A Rev. A

vii

Upper-Layer Protocols Failing to Pass Packets .................................................5-6

PVC Problems ...................................................................................................5-7

Troubleshooting ATM LANE .....................................................................................5-7

Troubleshooting an Ethernet Connection .......................................................................5-9

Troubleshooting a FDDI Connection .............................................................................5-14

Troubleshooting a Frame Relay Connection .................................................................5-17

Log Messages from Frame Relay Indicate Circuit Is Down ...................................5-17

Frame Relay Switch Keeps Marking the Circuit as Down ......................................5-18

Frame Relay Circuit Up, but Protocol Data Is Not Transmitting ..............................5-18

PVC Transmitting, but Not Receiving .....................................................................5-18

Frame Relay Conﬁgured with LMI Invokes an Xoff State .......................................5-19

Troubleshooting an MCT1 Connection .........................................................................5-20

Troubleshooting a Synchronous Connection ................................................................5-22

Checking the Address Format (Bay Networks Standard Only) ..............................5-24

Troubleshooting a Synchronous to X.21 Connection .............................................5-24

Reception Errors Incrementing or Reception Count Not Incrementing ..................5-24

Troubleshooting the Internal Clock Settings (Lab Environments Only) ..................5-26

Troubleshooting a Token Ring Connection ...................................................................5-27

Troubleshooting Other Data Link Layer Protocols ........................................................5-29

Chapter 6

Troubleshooting a Network Layer Problem

Troubleshooting AppleTalk ..............................................................................................6-2

Local Net Range Conﬂict Event Message ................................................................6-3

Zone . . . Conﬂict Event Message .............................................................................6-3

Static Conﬁguration Conﬂict Event Message ...........................................................6-4

Troubleshooting DLSw ....................................................................................................6-4

Troubleshooting IP ..........................................................................................................6-6

Troubleshooting Telnet, FTP, and TFTP ...................................................................6-8

Ping Does Not Work .................................................................................................6-9

Router Cannot Ping Another Local Device ......................................................6-10

Router Cannot Ping Endstation, Can Ping Other Endstations on the

Same Segment ................................................................................................6-11

Endstation Cannot Ping the Remote Interface on the Router ..........................6-11

viii

117379-A Rev. A

Endstation Can Ping Devices on the Same Segment, but Cannot Ping

the Router ........................................................................................................6-12

Endstation Can Ping Local and Remote Interfaces on the Router, but

Cannot Ping a Remote Station ........................................................................6-14

Troubleshooting RIP ...............................................................................................6-14

Troubleshooting OSPF ...........................................................................................6-15

Troubleshooting IPX .....................................................................................................6-16

Troubleshooting OSI .....................................................................................................6-21

Troubleshooting Switched Services ..............................................................................6-23

Master Cannot Connect to Slave ...........................................................................6-25

Troubleshooting RS-232 Raise DTR Dial Services ................................................6-25

Troubleshooting V.35 Raise DTR Dial (Balanced) ..................................................6-26

Troubleshooting ISDN BRI and PRI .......................................................................6-27

Troubleshooting Other Network Layer Protocols ..........................................................6-30

Chapter 7

Troubleshooting a Site Manager Problem

Site Manager Won’t Start ...............................................................................................7-1

Site Manager Won’t Start on a PC ...........................................................................7-1

Cannot Find File Message .................................................................................7-2

Working Directory or Path Is Invalid Message ...................................................7-3

Unable to Find UDP Port Numbers for SNMP Message ...................................7-3

Site Manager Won’t Start on a UNIX Workstation ....................................................7-3

Unable to Load SNMP MIB or File Was Inaccessible Message ........................7-4

Unable to Run . . . Module Message ..................................................................7-4

Cannot Establish a Site Manager Session with the Router ............................................7-5

Using an Alternative Site Manager Workstation to Enable Access ..........................7-5

Using the Technician Interface to Enable Access ....................................................7-6

Cannot Connect Site Manager Running on a PC ....................................................7-7

Cannot Connect Site Manager Running on a UNIX Workstation .............................7-8

Target Does Not Respond (or Similar Message) ......................................................7-9

Cannot Allocate Colormap Message ..............................................................................7-9

UNIX Workstation Generating Core Dumps ...................................................................7-9

117379-A Rev. A

ix

Chapter 8

Getting Help

Reporting a Problem to the Bay Networks Technical Solutions Center ..........................8-1

Sending and Retrieving Files ..........................................................................................8-3

Appendix A

Reading the Event Log

System Startup .............................................................................................................. A-2

Dial-on-Demand Raise DTR Log ................................................................................. A-18

Dial-on-Demand V.25bis .............................................................................................. A-23

MCT1 Log Information in a Lab Environment .............................................................. A-29

Appendix B

Using the Technician Interface to Conﬁgure and Run Packet Capture

Overview ........................................................................................................................ B-2

Implementation Notes .................................................................................................... B-4

Getting Started .............................................................................................................. B-5

Preparing Packet Capture to Run ........................................................................... B-5

Assigning the Processors to Run Packet Capture ............................................ B-5

Creating an Instance of Packet Capture ........................................................... B-7

Allocating Memory for the Packet Capture File ............................................... B-11

Specifying the Number of Bytes in Each Packet to Copy ............................... B-12

Enabling Packet Capture ................................................................................ B-12

Starting Packet Capture ........................................................................................ B-13

Terminating Packet Capture .................................................................................. B-13

Using the Technician Interface to Display a Packet Capture File .......................... B-14

Deleting a Packet Capture Instance ...................................................................... B-17

Using Optional Features .............................................................................................. B-18

Conﬁguring the Direction of the Packets to Be Copied ......................................... B-18

Conﬁguring a Termination Trigger ......................................................................... B-19

Assigning Filters .................................................................................................... B-21

Setting the Filter Response to a Match .......................................................... B-22

Specifying the String to Compare with the Packet Data ................................. B-23

Specifying the Data to Compare with the String ............................................. B-23

Selecting the Number of Filters That Must Match ........................................... B-26

Conﬁguration Examples .............................................................................................. B-27

Displaying the Current Packet Capture Conﬁguration Settings ................................... B-30

x

117379-A Rev. A

Displaying Event Messages Issued by Packet Capture ............................................... B-31

Using a Sun Workstation or DOS PC to Display Packets ............................................ B-31

Getting the Name of the Packet Capture File ........................................................ B-32

Using FTP to Transfer the File ............................................................................... B-32

Using TFTP to Transfer the File ............................................................................. B-33

Using XMODEM to Transfer the File ..................................................................... B-35

Displaying the File with Packet Dump ................................................................... B-35

Converting a Packet Capture File to Network General Sniffer Format ........................ B-36

Reference Guide to Packet Capture ............................................................................ B-38

Displaying the Packet Capture Attribute Names and Numbers ............................. B-38

Packet Capture Parameter Descriptions ............................................................... B-39

Basic Parameters ........................................................................................... B-40

Trigger Parameters ......................................................................................... B-45

Filter Parameters ............................................................................................ B-46

Media-Speciﬁc Instructions and Examples ........................................................... B-51

CSMA/CD ....................................................................................................... B-51

Protocols Supported by Synchronous, T1, E1, and MCT1 Media .................. B-52

Token Ring ...................................................................................................... B-56

FDDI ............................................................................................................... B-56

HSSI ............................................................................................................... B-56

ISDN ............................................................................................................... B-57

Interpreting a Packet Capture Instance Number ................................................... B-57

Appendix C

Packet Conﬁguration

Using the Line Subcommand ........................................................................................C-2

Using the Load Subcommand .......................................................................................C-5

Using the Unload Subcommand ....................................................................................C-5

Index

117379-A Rev. A

xi

Figures

Figure 1-1. Filtering Parameters Window ...................................................................1-6

Figure 3-1. Verifying the Slot ID on an ASN ...............................................................3-5

Figure 3-2. Finding the Slot Receiving Buffer Checksum Errors ..............................3-17

Figure 3-3. Finding the Slot Number When the Buffer Checksum Message

Does Not Reference a Backplane BofL Packet ......................................3-19

Figure 6-1. Comparing the Endstation and Router Conﬁgurations ..........................6-13

Figure 7-1. Cannot Find File Error Message ..............................................................7-2

117379-A Rev. A

xiii

Tables

Table 1-1. Technician Interface Event Message Filters .............................................1-7

Table 1-2. Example of an Object Named House .....................................................1-12

Table 3-1. ASN Front-Panel Status Indicators ..........................................................3-4

Table 3-2. ASN Rear-Panel SPEX Module Status Indicators ...................................3-4

Table 3-3. Memory Available for Router Processor Types ......................................3-13

Table 4-1. State Attribute Values ...............................................................................4-2

Table 5-1. First Set of ATM Interface MIB Objects to View .......................................5-3

Table 5-2. ATM Interface Attributes for Troubleshooting ...........................................5-3

Table 5-3. Second Set of ATM Interface MIB Objects to View ..................................5-4

Table 5-4. Troubleshooting Dropped Frames ............................................................5-5

Table 5-5. Error Codes in the “ATM VC mod failed” Log Message ...........................5-6

Table 5-6. ATM LANE MIB Objects to View ..............................................................5-8

Table B-1. Packet Capture Module Numbers for ARN Interfaces

(Except Synchronous) ............................................................................. B-4

Table B-2. Determining the Slot Mask ...................................................................... B-6

Table B-3. Structure of a Line Number ................................................................... B-58

117379-A Rev. A

xv

About This Guide

If you are responsible for isolating and solving problems associated with Bay

Networks

®

routers, read this guide.

This guide assumes you have the following background:

• Experience conﬁguring and managing Bay Networks routers

• A working knowledge of Site Manager and the Technician Interface

• A working knowledge of the protocols running on your routers

If you want to Go to

Prevent problems and prepare to troubleshoot Chapter

1

Determine the scope of a problem Chapter 2

Solve problems with the basic operation of hardware and software Chapter 3

Solve physical media problems Chapter 4

Solve data link layer problems Chapter 5

Solve network layer problems Chapter 6

Solve Site Manager problems Chapter 7

Report problems to the Bay Networks Technical Solutions Center Chapter 8

Read and understand the event log Appendix A

Use the Technician Interface to conﬁgure and run Packet Capture Appendix B

Conﬁgure the Packet Capture utility Appendix C

Troubleshooting Routers

xvi

117379-A Rev. A

Before You Begin

Before using this guide to solve a problem, see the following documents:

• Release Notes for Router Software Version 12.00

• Release Notes for Site Manager Software Version 6.00

• Known Anomalies: Router Software 12.00 and Site Manager 6.00

This guide assumes that you also have access to the following Bay Networks

manuals, which are on the CD-ROM:

• Using Technician Interface Software

• Using Technician Interface Scripts

• Conﬁguring and Managing Routers with Site Manager

• Event Messages for Routers

• The manuals associated with the software you are using

Make sure that you are running the latest version of Bay Networks Site Manager

and router software. For instructions, see

Upgrading Routers from Version

7–11.xx to Version 12.00

.

About This Guide

117379-A Rev. A

xvii

Conventions

angle brackets (< >) Indicate that you choose the text to enter based on the

description inside the brackets. Do not type the

brackets when entering the command.

Example: if command syntax is

ping

<ip_address>

,

you enter

ping 192.32.10.12

bold text

Indicates text that you need to enter, command names,

and buttons in menu paths.

Example: Enter

wfsm &

Example: Use the

dinfo

command.

Example: ATM DXI > Interfaces >

PVCs

identiﬁes the

PVCs button in the window that appears when you

select the Interfaces option from the ATM DXI menu.

brackets ([ ]) Indicate optional elements. You can choose none, one,

or all of the options.

ellipsis points Horizontal (. . .) and vertical ellipsis points indicate

omitted information.

italic text

Indicates variable values in command syntax

descriptions, new terms, ﬁle and directory names, and

book titles.

quotation marks (“ ”) Indicate the title of a chapter or section within a book.

screen text

Indicates data that appears on the screen.

Example:

Set Bay Networks Trap Monitor Filters

separator ( > ) Separates menu and option names in instructions and

internal pin-to-pin wire connections.

Example: Protocols > AppleTalk identiﬁes the

AppleTalk option in the Protocols menu.

Example: Pin 7 > 19 > 20

vertical line (

|

) Indicates that you enter only one of the parts of the

command. The vertical line separates choices. Do not

type the vertical line when entering the command.

Example: If the command syntax is

show at routes

|

nets

,

you enter either

show at routes

or

show at nets

, but not both.

.

()

Troubleshooting Routers

xviii

117379-A Rev. A

Acronyms

AAL ATM adaptation layer

ACE Advanced Communications Engine

ALC adaptation layer control

AMI alternate mark inversion

ARP Address Resolution Protocol

ASCII American Standard Code for Information Interchange

AT AppleTalk

ATM asynchronous transfer mode

AUI Attachment Unit Interface

B8ZS binary 8 zero substitution

BDR backup designated router

BECN backward explicit congestion notiﬁcation

BERT bit error rate test

BofL Breath of Life

BootP Bootstrap Protocol

BootPD BootP Daemon

BRI Basic Rate Interface

CCITT International Telegraph and Telephone Consultative Committee

(now ITU-T)

CD carrier detect

CHAP Challenge Handshake Authentication Protocol

CID channel identiﬁer

CRC cyclic redundancy check

CRN call request number

CSMA/CD carrier sense multiple access/collision detection

CSU channel service unit

CTS clear to send

DCE data communications equipment

DLCI data link connection identiﬁer

DLCMI Data Link Control Management Interface

DLSw data link switching

DOS Disk Operating System

About This Guide

117379-A Rev. A

xix

DP Data Path

DPRAM dual port RAM

DR designated router

DS directory service

DS1E1 multichannel T1/E1 driver service

DSAP destination service access point

DSL digital subscriber loop

DSR data set ready

DSU digital service unit

DTE data terminal equipment

DTR data terminal ready

EIA Electronic Industries Association

ESF extended super frame

FDDI Fiber Distributed Data Interface

FDL facility data link

FECN forward explicit congestion notiﬁcation

FRE Fast Routing Engine

FRE-2 Fast Routing Engine - 2

FSI FDDI System Interface

FSM ﬁnite state machine

FTP File Transfer Protocol

GAME Gate Access Management Entity

GFWD GAME forward

GH gate handle

GRPC GAME RPC

GUI graphical user interface

HDLC high-level data link control

HSSI high-speed serial interface

ICMP Internet Control Message Protocol

IEEE Institute of Electrical and Electronics Engineers

ILACC integrated local area communications controller

IP Internet Protocol

IPX Internet Packet Exchange

Troubleshooting Routers

xx

117379-A Rev. A

ISAP internal services access point

ISDN Integrated Services Digital Network

ISO International Organization for Standardization

ITU-T International Telecommunications Union - Telecommunications

sector (formerly CCITT)

LAN local area network

LAPB Link Access Procedure-Balanced

LB Learning Bridge

LBO line build out

LCP Link Control Protocol

LEC LAN emulation client

LECS LAN emulation conﬁguration server

LED light emitting diode

LLC logical link control

LSDB link state database

LSP link state packet

MAC media access control

MAU media access unit

MCT1 multichannel T1

MDI-X media-dependent interface with crossover

MIB management information base

MTU maximum transmission unit

NBMA nonbroadcast multi-access

NIS network information services

NVFS nonvolatile ﬁle system

OSI Open Systems Interconnection

OSPF Open Shortest Path First

PAP Password Authentication Protocol

PC personal computer (also, program counter)

PCAP Packet Capture utility

PCR peak cell rate

PDU protocol data unit

PPP Point-to-Point Protocol

Page is loading ...

Avaya Troubleshooting Routers Troubleshooting guide

Avaya Troubleshooting Routers Troubleshooting guide

Related papers

Other documents