Arctic Accelero XTREME Plus Installation guide

Type
Installation guide
Thermal Compound
The thermal compound is already pre-applied to the heatsink. If the cooler has to be installed a second time, we highly recommend using the ARCTIC MX-3 or the ARCTIC MX-4. Only our compound guarantees optimal
performance in combination with the surface of our heatsinks.
Price included worldwide shipping. Shipping time: 7 – 10 days.
*Be aware that the thermal adhesive comes with a very short shelf life and shall be used within 1 week upon receipt.
Screw M3 X 4
Washer X 4
Installation of Accelero XTREME Plus
Do not fasten the screws completely in
one step. Fasten each screw alternately
(screw A -> D -> B -> C) with 1 to 2
clockwise rotations. Repeat until all 4
screws are tightened.
Accelero XTREME Plus
Installation Manual
For further information, please consult www.arctic.ac
Deutsches Handbuch online verfügbar.
Le manuel en français est disponible en ligne.
Manual en espanol disponible en línea
Manual em Portugues disponível online.
Svensk manual tillgänglig online.
N?vod v ceštine dostupný online.
A magyar kézikönyv az interneten is elérheto.
Polski podrecznik dostepny na stronie internetowej
Nederlandstalige handleiding is online beschikbaar.
Copyright
2010 ARCTIC Switzerland. All Rights Reserved.
No part of this manual including the products described in it, may be reproduced, transmitted, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the
express written permission of ARCTIC Switzerland. In no event shall ARCTIC its directors or employees be liable for any indirect damages, incidental or consequential damages arising from any defect or error in this manual or product.
ARCTIC Switzerland
Huobstrasse 4
8808, Pfäffikon, Switzerland
www.arctic.ac
1. Purchase the corresponding Accelero XTREME Plus Accessories Set at xtreme.arctic.ac
2. Follow the installation instructions provided with the Accessories Set.
Installation of the voltage regulator heatsink and RAM heatsinks (sold separately)
Package Content
Price (USD)
Set
Compatible Models
ATI Radeon HD 6970, 6950, 6870, 5870, 5830, 4890, 4870, 4850, 4830, 3870, 3850
nVIDIA GeForce GTS 250, 9800GTX+, 9800GTX
Mounting plate, RAM, voltage regulator and NVIO chipset heatsinks set, thermal adhesive*
$7.99
VR002 nVIDIA GeForce GTX 285, 280, 275, 260+, 260
Mounting plate, RAM and voltage regulator heatsinks set, thermal adhesive*
$7.99
VR003 nVIDIA GeForce GTX 470, 465
Mounting plate, RAM and voltage regulator heatsinks set, thermal adhesive*
$7.99
VR004 nVIDIA GeForce GTX 580, 570, 480
VR001 RAM and voltage regulator heatsinks set, thermal adhesive* $7.99
Mounting plate, RAM and voltage regulator heatsinks set, thermal adhesive*
$7.99
VR005 nVIDIA GeForce GTX 460, 560 Ti
Not cleaning RAMs and voltage regulators thoroughly with an
eraser leads to no adhesiveness of the thermal adhesive at all.
Accessories
Screws
x 4 (M3)
Washers
x 4
VGA Bracket x 1
1
2
Preparation
ATX Adapter x1
1
2
  • Page 1 1

Arctic Accelero XTREME Plus Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI