GE GAX, a state-of-the-art accessory compatible with the Street Dreams Series, effortlessly elevates the aesthetics of your outdoor lighting. Designed for Traditional-TH**, Prismatic-P**, and Avery models, this meticulously crafted crown and ribs assembly adds a touch of elegance and sophistication to your exterior decor.
GE GAX, a state-of-the-art accessory compatible with the Street Dreams Series, effortlessly elevates the aesthetics of your outdoor lighting. Designed for Traditional-TH**, Prismatic-P**, and Avery models, this meticulously crafted crown and ribs assembly adds a touch of elegance and sophistication to your exterior decor.
GEH-5977
INSTRUCTIONS
SD-CR-M
SD-CR-S
35-201578-169 (11/06)
GENERAL
This accessory is designed to mount to the Street Dreams Series
(Traditional-TH**, Prismatic- P** and Avery). It does not include
the Lantern, Gallimore or Vandermore series. Use on other
luminaires is not intended or recommended and will violate the
warranty.
UNPACKING
This accessory has been properly packed so that no parts should
have been damaged during transit. Inspect to confirm.
Note: Scroll cage has one screw upper screw omitted for
ease of field assembly.
INSTALLATION
MOUNTING OF CROWN AND RIB ASSEMBLYFUTURE USE
To mount the Street Dreams Scroll and Medallion Crown and
Ribs Cages:
1. Remove globe assembly from base by rotation counter-
clockwise.
2. Invert the globe on a solid surface, covered to protect globe
from scratching and other damage.
WARNING
Risk of electric shock
• Turn power off before servicing
CAUTION
Risk of burn
• Do not touch operating luminaire
CAUTION
Risk of injury
• Wear safety glasses and gloves
during installation and servicing
READ THOROUGHLY BEFORE INSTALLING
SAVE THESE INSTRUCTIONS FOR FUTURE USE
3. Align the ribs of the inverted cage w/ the hooks on the
globe ring (see Figure 1)
4. Working in a clockwise pattern, slide each rib of the cage
past the globe ring (see Figure 2)
5. Seat base of ribs into pockets on the globe ring
6. Insert the screws provided through globe ring from bottom,
into end of ribs and fully tighten (see Figure 3)
7. Return globe assembly to base, rotating clockwise into
locked position.
Figure 1
Scroll
Medallion
Crown and Ribs
Figure 2
Figure 3
These instructions do not purport to cover all details or variations in equipment nor to provide for every possible contingency to be met in connection with installation, operation or
maintenance. Should further information be desired or should particular problems arise which are not covered sufficiently for the purchaser’s purposes, the matter should be referred
to GE Lighting Solutions.
g
GE Lighting Solutions is a subsidiary of the General Electric Company. Evolve and other trademarks belong to GE Lighting Solutions. The GE brand and logo are trademarks of the General Electric Company.
© 2011 GE Lighting Solutions. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions.
GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com
16943533----888
g
GE
Lighting Solutions
GEH-5977
INSTRUCTIONS
SD-CR-M
SD-CR-S
35-201578-169 (11/06)
GENERAL
This accessory is designed to mount to the Street Dreams Series
(Traditional-TH**, Prismatic- P** and Avery). It does not include
the Lantern, Gallimore or Vandermore series. Use on other
luminaires is not intended or recommended and will violate the
warranty.
UNPACKING
This accessory has been properly packed so that no parts should
have been damaged during transit. Inspect to confirm.
Note: Scroll cage has one screw upper screw omitted for
ease of field assembly.
INSTALLATION
MOUNTING OF CROWN AND RIB ASSEMBLYFUTURE USE
To mount the Street Dreams Scroll and Medallion Crown and
Ribs Cages:
1. Remove globe assembly from base by rotation counter-
clockwise.
2. Invert the globe on a solid surface, covered to protect globe
from scratching and other damage.
WARNING
Risk of electric shock
• Turn power off before servicing
CAUTION
Risk of burn
• Do not touch operating luminaire
CAUTION
Risk of injury
• Wear safety glasses and gloves
during installation and servicing
READ THOROUGHLY BEFORE INSTALLING
SAVE THESE INSTRUCTIONS FOR FUTURE USE
3. Align the ribs of the inverted cage w/ the hooks on the
globe ring (see Figure 1)
4. Working in a clockwise pattern, slide each rib of the cage
past the globe ring (see Figure 2)
5. Seat base of ribs into pockets on the globe ring
6. Insert the screws provided through globe ring from bottom,
into end of ribs and fully tighten (see Figure 3)
7. Return globe assembly to base, rotating clockwise into
locked position.
Figure 1
Scroll
Medallion
Crown and Ribs
Figure 2
Figure 3
These instructions do not purport to cover all details or variations in equipment nor to provide for every possible contingency to be met in connection with installation, operation or
maintenance. Should further information be desired or should particular problems arise which are not covered sufficiently for the purchaser’s purposes, the matter should be referred
to GE Lighting Solutions.
g
GE Lighting Solutions is a subsidiary of the General Electric Company. Evolve and other trademarks belong to GE Lighting Solutions. The GE brand and logo are trademarks of the General Electric Company.
© 2011 GE Lighting Solutions. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions.
GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com
16943533----888
g
GE
Lighting Solutions
-
1
-
2
GE GAX, a state-of-the-art accessory compatible with the Street Dreams Series, effortlessly elevates the aesthetics of your outdoor lighting. Designed for Traditional-TH**, Prismatic-P**, and Avery models, this meticulously crafted crown and ribs assembly adds a touch of elegance and sophistication to your exterior decor.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI