Haier 29F5D User manual

Please READ this m anual carefully

before operating the unit, and keep

it for future re ference.

COLOR TV RECEIVER

OWNER'S MANUAL

The O w ner‘s M anual for the Follow M odels:

29F5D, 34F5D

* For your enjoym ent of this TV set, please read this m anual carefully and

keep it good for future reference.

CONTENTS

Before Operation

Basic Operation

Technical operation

Warning and cautions............................................................................................2

Installation..........................................................................................................3

Antenna connection...........................................................................................3

Preparation for the re m o te contro l........................................................................3

Position of Button and Plug-ins................................................................................4

Front and side panel ..........................................................................................4

B ack panel.......................................................................................................4

Function button of the re m o te contro l........................................................................5

The screen display m enu........................................................................................6

Switch on/off the TV set..........................................................................................7

Watching TV program s...........................................................................................8

Watching TV program .........................................................................................8

Program sw ap and auto scan functions..................................................................9

Tune.................................................................................................................10

Auto search....................................................................................................10

Search...........................................................................................................11

Fine tune and P rogram lock functions..................................................................12

Skip unnecessary channel.................................................................................13

Exchange program s.........................................................................................14

Picture adjusting...

............................................................................................15

Select

the picture m odes and set the picture quality...........................................15

Color Te m p function...........................

.............................................................16

3A Optimize and 3DNR functions.......................

..............................................17

Com b filter and LayerE n./ Color En. Functions................................

..................18

S ound adjusting............................................................................

....................19

Select the sound m odes and set the sound quality.............................................19

Equalizer and mute

functions..........................................................................20

Time set up function.............

..............................................................................21

Set current time and on/off time f

unctions.........................................................21

Rem ind P rogram Function..............................

................................................22

Set up function............................................

......................................................23

Select the m enu Language and S creen saver functions...........................

..........23

Select Switch on m ode and HDM scan function.................................................24

Tilt function and setting Transparency

m enu.....................................................25

Setting the Lock........................................

.........................................................26

C hange your passw ord...................................

................................................26

Setting the Lock........................................

.....................................................27

Others functions..................................................................................................28

Calendar,picture still and zoom functions.........................................................28

Setting and Using Favorite program s, Setting Sleep Timer ................................29

VGA input adjustm ent.......................................................................................30

Multi-M edia Player system .................................................................................31

Multi-M edi

a Player P reparation........................................................................31

To operate the m enu.............

...........................................................................33

Multi-M edia player..............

............................................................................34

C opy file function...........

.................................................................................38

Set up functions........

......................................................................................39

External connections...........................................................................................40

Video/A udio output connection,VG A input............................................................40

Video/A udio input connection.............................................................................41

Others

Trouble shooting.................................................................................................42

Specifications.....................................................................................................43

Warning and Cautions

1. W hen you clean the TV set, please

pull out the pow er plug from AC outlet.

D on’t clean the cabinet and the

screen with benzene, petrol and other

chem icals.

4. Do not place the TV set near rain or

moisture as it m ay cause an electric

shock, or the TV set to catch fire. The

TV set must only

be used in dry in

door locations.

2. In order to prolong the using life of

the TV set, please place it in a w ell

ventilated location.

5. T he back cover must only be

rem oved by a registered electrical

service person. Rem oving the back

cover may result in electric

shock, fire

or dam age to

the TV set.

3. D on’t place the

TV set in direct

sunlight or near a

heat source.

6. If the TV set is not going to be used

for a long time, or there is a severe

thunder & Lighting storm , it is

recom m ended that the TV set be

disconnected from the AC pow er outlet

and the aerial plug rem oved.

Explanation on the display tube

Should the picture tube require cleaning, disconnect the pow er and use a dry

soft cotton cloth. Do not use any cleanser or abrasive cloths.

Installation

Antenna connection

G eneral speaking, to enjoy a clearer picture, we recom m end that you use a CATV

system or an outdoor antenna .In different places, the suitable antenna type and position

are different.

300 twin-lead cable

Antenna adapter

(additional purchase)

75 coaxial cable

Plug

(additional purchase)

Mixer

additional

purchase

Antenna input

75 standard

coaxial type

AC pow er socket

Note

It is recom m ended that you’d better use 75

D on’t bind antenna cable and electric wire together.

coaxial cable to rem ove the

disturbance caused by airwave.

Preparation for the rem ote control

* the plug type may vary

depending on the m odel.

Battery installation

Take off the battery com partm ent cover. Place two AA batteries, make sure that battery

polarity matches with the +/- mark inside the battery com partm ent.

O peration notes for the rem ote control unit

U nder normal conditions, the life time of batteries is one year.

If you don’t intend to use the unit for a long period or the electricity of the batteries is

used up, rem ove the batteries to prevent batteri

es acid from leaking into the battery

com partm ent.

Avoid dropping the rem ote control and/or getting it wet.

Never place batteries in a fire.

S-video input terminal: S pecial video S-VIDEO AUDIO: L/MONO Track L/MONO ,R Track R

AV output terminals: VIDEO AUDIO L/MONO Track L/MONO ,R Track R

AV2 input terminals MONITO R : VIDEO AUDIO :L/MONO Track L/MONO ,R Track R

AV1 input terminals MONITO R :VIDEO AUDIO :L/MONO Track L/MONO ,R Track R

DVD com ponent terminals:

Interleaved signal Y C

b C r AUDIO L/MONO Track L/MONO ,R Track R

Progressive signal YPb Pr AUDIO L/MONO Track L/MONO ,R Track R

HDTV input terminals: YPb Pr terminal AUDIO L/MONO Track L/MONO ,R Track R

Position of Buttons and Plug-ins

Front and Side panel

B ack panel

+CH -+ VOL -

TV/AV M ENU

VIDEO

AUDIO

R

L

USB

Side AV terminal

Power sw itch

USB Terminal

Cards Jack

Infrared receiver

C hannel position up/dow n

Volum e up/ dow n

TV/Video (input selector

MENU

Power indicator

Note:

The cabinet and buttons of TV is

only for reference.

AV output terminals

Antenna input

VGA input terminal

AV2 input terminals

AV1 input terminals

YUV input terminals

S-video input terminal

YUV

VIDEO

AUDIO

VGA IN

P

r(cr)

Pb(cb)

AVO UT

L

R

AV

2IN AV1IN

L

R

L

R

L

R

1.W hen the AV 2 terminal, the side AV terminal can not be

connected at the sam e time

USB terminal or

.

2.W hen the side AV is connected, please select the AV 2 terminal.

Mute button

I/II select button

Picture still button

Screen call/help button

HDM m enu call button

Program scan button

Direct

Digital

Program sw ap button

Picture m ode selection button

Sound m ode selection button

Program

M enu call/select

button

Select m enu, call and exi

Picture m enu call/gam e direction select

Sound m enu call/gam e direction select

Favorite program button

(No available)

Function m enu call

QSET button(No available)

Zoom select button

Time skip button

Time m enu call button

Calendar /Exit button

Hotel lock button

Digital album N o available

To eliminate the sound of the program s

DC standby and pow er button

TV and AV exchange button

A changeover betw een TV and other

input signals like AV

select button

Select a TV channel di

rectly

selection button

C hangeover from one digital, two

digital and three digital

Volum e adjustm ent button

adjustm ent button

(No available)

ZOOM

CAL./EXIT

MUTE

TV/AV

POW ER

HDM

SCAN

C A LL/HELP

P.STD

S.STD

CH+

CH-

VOL- VOL+

MENU

PICTURE

FUNCTION

QSET

SHUTTLE

FAVO RITE

SOUND

STILL

SW AP

T.SKIP

TIME

H.LO C K

D.ALBUM

Function Buttons of the Remote Control

Function buttons of the re m o te contro l

MENU

Lock Set

The Screen Display Menu

For your convenience of operation, here lists the screen display m enus of this m odel

as your re ference.

Note:

W hen the TV set is pow ered on, there might be different fro m w hat have been

illustra ted above. Please do som e adjustm ent as follow s to m eet your needs.

1. P ress the M ENU button, and then press CH+/- buttons to select the m enu

in the

main m enu: PICTURE, SOUND, TUNE ,SETUP and TIMER. Off course, you may

select these m enus dire c tly by pressing the PICTURE, SOUND, TIME and FUNCTION

buttons on the re m o te contro l.

2. If it is not in sub-m enu, press the VO L-/+ buttons to enter the sub-m enu.

3. Then press the CH+/- to select the desired item , press the VO L-/+buttons to adjust

the num erical value. After that, press the MENU button to re turn the main m enu.

4. If you w ant exit the m enu, press the M ENU button repetitiously.

Picture m enu

Sound m enu

Tune m enu Setup m enu

Timer m enu

H.lock m enu

Picture M ode Standard

50

30

Brightness

C ontrast

Color

Hue

Sharpness

Advance

50

0

Color Tem p. Cool

Picture

Sound

Tune

Setup

Timer

Sound M ode

3D Mono Off

Off

Trubass Off

Off

0

Standard

SRS Dialog

W oofer

Balance

Equalizer

Exchange

Program edit

Search

Auto Search

Quick Search

Current Time

Off Time

On Time

O n program

Remind time

Remind program

Sleep Time

122 7

-- --

1 0

-- --

---

O ff

C hange P assw ord

New PW D ----

C onfirm PW D ----

C onfirm

Lock Off

C hannel Lock

Off

MENU

Picture

Sound

Tune

Setup

Timer

Picture

Sound

Tune

Setup

Timer

Language E nglish

Screen Saver On

Curtain

Color S ys. P A L50

HDM scan 100H z

Transparency On

Tilt

0

MENU

Picture

Sound

Tune

Setup

Timer

Picture

Sound

Tune

Setup

Timer

POW ER

Switch on/ off the TV set

In the follow ing, the methods of using pow er sw itch and rem ote control to sw itch on/off

pow er supply for the TV set will be explained.

Switch on/ off the TV set

1.C onnect the pow er supply wire. Then press the pow er

sw itch button, the pow er indicator will light, in several

seconds the picture will display on the screen.

2. If the TV is in the state of standby, press the PO W ER

button or

the CH+/- buttons on the rem ote control.

Note:

1. Press the CH+/- buttons which is on the TV set to get

out of the standby state w hen the rem ote control is not

in use.

2. P ress the PO W ER button on the re m o te contro l

t

o the standby m ode.

3. P ress the pow er button on the TV set to

com pletely pow er off the TV.

4. To eliminate the m agnetization com pletely, the

TV set degausses autom atically. There is the

sound of PENG, it is natural.

Autom atic stand by function

If no signal has been received, and after five

minutes, it will stand by autom atically.

CH+

CH-

VOL- VOL+

MENU

Watching TV Programs

Watching TV program s

CH+

CH-

VOL- VOL+

MENU

CH+

CH-

VOL- VOL+

MENU

How to select the TV program

Select the desired program

1. Use the dire c t num ber selection button

2. Use the CH+/- buttons

Press the CH+ button to select the channel of the larger num ber.

Press the CH- button to select the channel of the sm aller num ber.

Press the button from 0-9

to select a one-figure channel.

If you w ant to select a double figures channel, press the

figure-selection button and change it into two-figure m ode, then

press the num ber of the channel.

If you w ant to select a three fi

gures channel, press the figure-selection

button and change it into three-figure m ode, then press the num ber

of the channel.

Select the desired sound

Press the VO L+/- buttons to adjust the volum e to your need.

If the colour or sound of a certain channel is

abnorm al

If the TV set you bought is

abnorm al in colour or sound in a

certain channel, it might be

because the colour or sound

system has been set im properly.

You may follow the instru c tion

below to adjust it. P ress the

MENU button, then press CH+/-

buttons to select

function m enu,

and you can see the form . Then

press VO L+ button to enter sub-

m enu.

If the colour of the picture is abnorm al

Press the CH+/- buttons to move the indicator to "Color S ys.", and

press the VO L+/- buttons to select the proper color.

Refer the above steps to enter the

Program edit m enu. Press the CH+/-

buttons to move the indicator to

"

Sound S ys.", and press the VOL+/-

buttons to select the proper sound.

If the sound is abnorm al

Program NO. 2

Skip Off

Lock Off

Sound Sys. BG

Fine tune <144.20MHz>

Program edit

Language E nglish

Screen Saver On

Curtain

Color sys. P A L50

HDM scan 60H z

Transparency On

Tilt

0

MENU

Picture

Sound

Tune

Setup

Timer

CH+

CH-

VO L- VO L+

MENU

SW AP

SCAN

Watching TV Programs (continued)

Sw ap function enables quick sw ap to the last watched program .

Program sw ap and auto scan functions

Program sw ap

1.

Suppose the channel num ber

you used just now is 8 and the

channel num ber you are using

is 18 (as show n in the figure).

2. If you w ant to return to the

last watched program channel

8, you can simply press the

SW AP button.

3. If you w ant to return to

channel 18, press the button

again. Through this function,

you can easily change

betw een the channel you are

using and the channel you

used last time.

Auto program scan

1. Press the SCAN button to

scan through all the memorized

TV channels.

2.W hen it is the program that

you desired, and press the

MENU button to confirm.

CH+

CH-

VOL- VOL+

MENU

VHF-L 188.16 MHz CH NO:4

Auto Search

Tune

The TV set has three methods to set the channels, which are Auto search, S earch and Fine tune.

In this section, how to use the rem ote control to set the channel is explained. You can also use the buttons

on the TV set to set channel.

Auto search

1. Press the MENU button to display

the m enu, then press CH+/-buttons

to select TUNE m enu, press VOL+

button to enter.

2. Press the CH+/- buttons to move

the indicator to " Auto S earch ".

3. Press the VOL+ button, and

"

Auto S earch" m ode will work.

The TV set will search autom atically

all available program s, after search

is finished, all available program s

will be stored in turn.

If you w ant to stop the search,

just press the M ENU button.

The order of the autom atic search is due to the frequency of

the program , generally speaking, it is used only the firs t time

you search the program , and after the order of the program

has been m ade, you don’t have

to use this function,

otherw ise the order of the program will be mixed.

Auto search

After searching (C ontinued)

Press the CH+/- buttons to check channels.

If the colour or sound is abnormal in a certain channel, it may be

because that the colour or sound system has not been set

properly, then, you may adjust it to proper system (Refer to

page 8).

Exchange

Program edit

Search

Auto Search

Quick S earch

MENU

Picture

Sound

Tune

Setup

Timer

Exchange

Program edit

Search

Auto Search

Quick S earch

MENU

Picture

Sound

Tune

Setup

Timer

CH+

CH-

VOL- VOL+

MENU

C A LL/HELP

Tune (Continued)

Search

1. Press the CH+/- buttons or Direct

select button to select the desired

channel num ber.

2. Press the MENU button to display

the m enu, then press CH+/-buttons

to select TUNE m enu, press VO L+

button to enter.

. Press the CH+/- buttons to

move the indicator to "S earch",

and then press the VOL+ button

to enter the SEARCH m enu.

4. Press the VOL+ or VO L- buttons,

the TV set will begin to search up or

dow n, w hen the TV set has searched

a program , the TV set

will stop

searching. If the program is not the

one you need, you can press the

button again, let the TV set continue

to search until it has searched the TV

signal you need.

Note:

U sually, five seconds after the channel has been changed, the channel

num ber will disappear autom atically. If you w ant to know which channel

you are watching, just press the C ALL/HELP button once.

Exchange

Program edit

Search

Auto Search

Quick Search

MENU

Picture

Sound

Tune

Setup

Timer

VHF-L 188.16 MHz CH NO:4

Search

CH+

CH-

VOL- VOL+

MENU

CH+

CH-

VOL- VOL+

MENU

CH+

CH-

VOL- VOL+

MENU

Fine Tune

Program Lock buttons

Tune (Continued)

Fine Tune and Program Lock functions

If the picture and/or sound are poor, try using the FINE

TUNE feature. Do not use this feature unless reception

is poor.

1. Press the CH+/- buttons or Direct

select button to select the desired

channel num ber. ( For exam ple, the

channel 1.)

2. Press the MENU button to display

the m enu, then press CH+/-buttons

to select TUNE m enu, press VOL+

but

ton to enter.

3. Press the CH+/- buttons to

move the indicator to " Program

edit ", then press the VOL+ button

to sub-m enu.

4. Press the CH+/- buttons to

move the indicator to " Fine Tune ".

5. Press the VOL+ button to enter

the Fine Tune M enu, and then

until it has searched the

TV signal you need.

the

VOL- button to search dow nw ards

or the VOL+ button to search

upw ards

If the program Lock and the program Lock of the Lock

Set are ON, the screen is black and LOCK will shown.

The program is locked.

1.Repeat the steps 1-4 of Fine

Tune to select the Lock item.

. Press the VOL+ button to turn

the Lock function to "O n ".

. Press the H.Lock button to turn

the Program Lock function to "O n "

(Refer to page 27),then the screen

is black. After setting the Program Lock to On, the Lock of the

Program Edit m enu will fail.

Exchange

Program edit

Search

Auto Search

Quick Search

MENU

Picture

Sound

Tune

Setup

Timer

Program NO. 2

Skip Off

Lock Off

Sound Sys. BG

Fine tune <144.20MHz>

Program edit

Program NO. 2

Skip Off

Lock Off

Sound Sys. BG

Fine tune <144.20MHz>

Program edit

CH+

CH-

VO L- VO L+

MENU

CH+

CH-

VOL- VOL+

MENU

2. Press the MENU button to display

the m enu, then press CH+/-buttons

to select TUNE m enu, press VOL+

button to enter.

3. Press the CH+/- buttons to

move the indicator to " Program

edit ", then press the VOL+ button

to sub-m enu.

1. Press the CH+/- buttons or Direct

select button to select the desired

channel num ber. ( For exam ple, the

channel 1.)

4. Press the CH+/- buttons to

move the indicator to " Skip ".

1. Use the C hannel Selection buttons to select the num ber of the

channel to be recovered.

2. R epeat those steps just now .

3. Press the VO L+/- buttons to turn the SKIP function O FF.

Tune (Continued)

Skip unnecessary channel

The Program skip feature enables you to skip/hide program s

that you do not wish to be displayed w hen using the CH+/-

buttons. These channels will still be displayed by dire c tly

using the channel num ber buttons on the re m o te contro l.

. Press the VOL-/+ buttons to

turn the Skip function to "O N ".

. Press the MENU button to exit

the m enu display.

If you w ant to recover the skipped channel

Exchange

Program edit

Search

Auto Search

Quick Search

MENU

Picture

Sound

Tune

Setup

Timer

Program NO. 2

Skip Off

Lock Off

Sound Sys. BG

Fine tune <144.20MHz>

Program edit

CH+

CH-

VOL- VOL+

MENU

CH+

CH-

VOL- VOL+

MENU

Current Program 3

Exchange Program 9

Exchange

Tune (Continued)

Exchange Programs

This feature enables TV programmes that may be on a wrong program

number to be moved to another number.

This feature is very useful when Automatic Search Tuning has been used

because programmes are stored in the order they are found, which is usually

not the desired order.

When organising, it is best to start from the lowest programme number first.

1. Press the MENU button to display

the m enu, then press CH+/-buttons

to select TUNE m enu, press VOL+

button to enter.

2. Press the CH+/- buttons to

move the indicator to " E xchange ".

3. Press the VO L+ button to

sub-m enu.

4. Press the VOL-/+ buttons to set

the Current Program to 3.

. Press the CH+/- buttons to move the indicator to " E xchange

Program ", then press the VOL-/+ buttons to set the E xchange

Program to 9.

. Press the CH+/- buttons to move the indicator to " E xchange ",

press the VOL+ button to confirm.

Exchange

Program edit

Search

Auto Search

Quick Search

MENU

Picture

Sound

Tune

Setup

Timer

CH+

CH-

VOL- VOL+

MENU

P.STD

PICTURE

Picture Adjusting

Select the picture m odes and set the picture quality

How to select the picture m odes

Y ou can quickly select the desired picture m ode from four

preset m odes and one custom ized m ode.

Standard

Soft

User

Listen

Rich

MODE

PICTURE QUALITY

M edium color and brightness

Low color and brightness

Set by yourself

No pictures)

Bright color

(

Press the P.STD button to select the desired picture quality.

Set the picture quality

W hen the Picture M ode is User m ode, you can set the picture

quality

1. Press the PICTURE button, the

Picture m enu will appear on the

screen.

. Press the CH+/- buttons to

move the indicator to the desired

option (For exam ple, C ontrast), then

press VO L-/+ buttons to set the

desired quality. Press the PICTURE

button to exit the Picture m enu.

Brightness

C ontrast

Color

S harpness

Press VO L- button

Option

Press VO L+ button

Dark

W eak

Light

Soft

Bright

Strong

Thick

S harp

Tip: HUE option is available only in N color system .

MENU

Picture Mode Standard

50

30

Brightness

Contrast

Color

Hue

Sharpness

Advance

50

0

Color Tem p. Cool

Picture

Sound

Tune

Setup

Timer

CH+

CH-

VOL- VOL+

MENU

Color Temp Function

PICTURE

Picture Adjusting (Continued)

1. Press the PICTURE button, the

Picture m enu will appear on the

screen.

. Press the CH+/- buttons to move

the indicator to "C o lor Tem p.".

MENU

Picture M ode Standard

50

30

Brightness

Contrast

Color

Hue

Sharpness

Advance

50

0

Color Tem p. C ool

Picture

Sound

Tune

Setup

Timer

. Press the VOL-/+ buttons to

select "C ool", "W a rm" or "S tandard".

CH+

CH-

VOL- VOL+

MENU

CH+

CH-

VOL- VOL+

MENU

PICTURE

Picture Adjusting (Continued)

3A Optimize On

Com b filter Off

3DNR Off

Layer en. Off

Color en. Off

3A Optimize and 3DNR Functions

3A Optimize Function

1. Press the PICTURE button, the

Picture m enu will appear on the

screen.

. Press the CH+/- buttons to move

the indicator to "Advance", then

press the VO L+ button to sub-

m enu.

. Press the CH+/- buttons to move

the indicator to "3 A Optimize".

. Press the VOL-/+ buttons to

select "O n ", "O ff" or "W indow ".

3DNR Function

1. Press the PICTURE button, the

Picture m enu will appear on the

screen.

. Press the CH+/- buttons to move

the indicator to "Advance", then

press the VO L+ button to sub-

m enu.

. Press the CH+/- buttons to move

the indicator to "3DNR".

. Press the VOL-/+ buttons to

select the desired item .

MENU

Picture

Sound

Tune

Setup

Timer

3A Optimize On

Com b filter Off

3DNR Off

Layer en. Off

Color en. Off

MENU

Picture

Sound

Tune

Setup

Timer

MENU

Picture M ode Standard

50

30

Brightness

Contrast

Color

Hue

Sharpness

Advance

50

0

Color Tem p. C ool

Picture

Sound

Tune

Setup

Timer

MENU

Picture M ode Standard

50

30

Brightness

Contrast

Color

Hue

Sharpness

Advance

50

0

Color Tem p. C ool

Picture

Sound

Tune

Setup

Timer

CH+

CH-

VOL- VOL+

MENU

CH+

CH-

VOL- VOL+

MENU

PICTURE

Picture Adjusting (Continued)

Comb filter and Layer En./Color En. Functions

Comb filter Function

Layer En./Color En. Functions

1. Press the PICTURE button, the

Picture m enu will appear on the

screen.

. Press the CH+/- buttons to move

the indicator to "Advance", then

press the VO L+ button to sub-

m enu.

. Press the CH+/- buttons to move

the indicator to "C om b filter".

. Press the VOL+/- buttons to select

"O n " or "O ff".

1. Press the PICTURE button, the

Picture m enu will appear on the

screen.

. Press the CH+/- buttons to move

the indicator to "Layer en." Or

"C o lor en.".

. Press the CH+/- buttons to move

the indicator to "Advance", then

press the VO L+ button to sub-

m enu.

. Press the VOL+/- buttons to select

"O n " or "O ff".

3A Optimize On

Com b filter Off

3DNR Off

Layer en. Off

Color en. Off

MENU

Picture

Sound

Tune

Setup

Timer

3A Optimize On

Com b filter Off

3DNR Off

Layer en. Off

Color en. Off

MENU

Picture

Sound

Tune

Setup

Timer

MENU

Picture Mode Standard

50

30

Brightness

Contrast

Color

Hue

Sharpness

Advance

50

0

Color Tem p. Cool

Picture

Sound

Tune

Setup

Timer

MENU

Picture Mode Standard

50

30

Brightness

Contrast

Color

Hue

Sharpness

Advance

50

0

Color Tem p. Cool

Picture

Sound

Tune

Setup

Timer

CH+

CH-

VOL- VOL+

MENU

Adjusting the Balance item

3D M ono

3D dynam ic surround

Setting "O n "

SRS Dialog

Trubass

W oofer

Enhance bass

Standard

News

User

Music

Standard

Speech

You can set it by yourself

Musical

Sound M ode

S.STD

SOUND

Sound Adjusting

Select the sound m odes and set the sound quality

How to select the sound m odes

Y ou can quickly select the desired sound m ode from three

preset m odes and one custom ized m ode.

Press the S.STD button to select the desired picture quality.

Four kinds of sound m odes can be selected in turn.

Sound q u a lity

Set the sound quality

W hen the Personal m ode is selected, you can

custom ize the

sound quality.

1. Press the SOUND button, the

Sound m enu will appear on the

screen.

. Press the CH+/- buttons to move

the indicator to the desired option,

then press VO L-/+ buttons to set the

desired quality. Press the SOUND

button to exit the S ound m enu.

Option

Press VOL- button P ress VO L+ button

BALANCE

R track dow n

L track dow n

Adjusting the S pecial item s

Option

SRS Dialog

Enhance w oofer

Sound M ode

3D M ono Off

Off

Trubass Off

Off

0

Standard

SRS Dialog

W oofer

Balance

Equalizer

MENU

Picture

Sound

Tune

Setup

Timer

Page is loading ...

Haier 29F5D User manual

This manual is also suitable for

Haier 29F5D User manual

Related papers

Other documents