Tyan Computer Tank GT25 B5381 User manual

Tank GT25

B5381

Service Engineer’s Manual

iii

Table of Contents

Chapter 1:Overview

1.1 About the Transport GT25 B5381 . . . . . . . . . . . . . . . . . . . . . . . . .1

1.2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

1.3 Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1.3.1 Opening the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1.3.2 Box Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.3.3 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

1.4 About the Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

1.4.1 Front View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

1.4.2 Rear View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

1.4.3 LED Definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

1.4.4 Internal View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

1.4.5 Motherboard Block Diagram. . . . . . . . . . . . . . . . . . . . . . . 11

1.4.6 Motherboard Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Chapter 2:Setting Up

2.0.1 Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

2.0.2 Work Area. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2.0.3 Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2.0.4 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

2.1 Rack Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

2.1.1 Installing the Server in a Rack. . . . . . . . . . . . . . . . . . . . . . 17

2.2 Installing Motherboard Components. . . . . . . . . . . . . . . . . . . . . . . 23

2.2.1 Removing the Chassis Cover. . . . . . . . . . . . . . . . . . . . . . . 23

2.2.2 Installing the Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

2.2.3 Installing the CPU and Heatsink . . . . . . . . . . . . . . . . . . . .25

2.2.4 Installing the PCI-X Card . . . . . . . . . . . . . . . . . . . . . . . . .29

2.3 Installing the External Hard Drive . . . . . . . . . . . . . . . . . . . . . . . . 31

2.4 Installing the Slim FDD (Option) . . . . . . . . . . . . . . . . . . . . . . . . .33

Chapter 3:Replacing Pre-Installed Components

3.1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

3.1.1 Work Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

3.1.2 Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

3.1.3 Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

3.2 Disassembly Flowchart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

3.3 Removing the Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

3.4 Replacing Motherboard Components . . . . . . . . . . . . . . . . . . . . . .39

3.4.1 Disconnecting All Motherboard Cables . . . . . . . . . . . . . . 39

3.4.2 Removing the Motherboard . . . . . . . . . . . . . . . . . . . . . . . . 41

iv

3.5 Replacing the Slim CD-ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

3.6 Replacing the LED Control Board . . . . . . . . . . . . . . . . . . . . . . . . 44

3.7 Replacing the M1012 Adapter Board . . . . . . . . . . . . . . . . . . . . . .46

3.7.1 M1012 Adapter Board Features for B5381 . . . . . . . . . . . . 48

3.7.2 System Fan Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

3.7.3 M1012 Adapter Board Connector Pin Definition . . . . . . . 50

3.8 Replacing the SATA Backplane . . . . . . . . . . . . . . . . . . . . . . . . . . 55

3.8.1 SATA Backplane Features. . . . . . . . . . . . . . . . . . . . . . . . . 57

3.9 Replacing the Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Appendix I: BIOS Differences

Appendix II: Cable Connection Tables

Appendix III: Memory Population Rules

PREFACE

Copyright

This publication, including all photographs, illustrations, and soft-

ware, is protected under international copyright laws, with all rights

reserved. Neither this manual, nor any material contained herein,

may be reproduced without written consent of the manufacturer-.

Version 1.0

Disclaimer

Information contained in this document is furnished by TYAN Com-

puter Corporation and has been reviewed for accuracy and reliability

prior to printing. TYAN assumes no liability whatsoever, and dis-

claims any express or implied warranty, relating to sale and/or use of

TYAN products including liability or warranties relating to fitness for

a particular purpose or merchantability. TYAN retains the right to

make changes to product descriptions and/or specifications at any

time, without notice. In no event will TYAN be held liable for any

direct or indirect, incidental or consequential damage, loss of use,

loss of data or other malady resulting from errors or inaccuracies of

information contained in this document.

Trademark Recognition

All registered and unregistered trademarks and company names

contained in this manual are property of their respective owners

including, but not limited to the following.

TYAN and Tank GT25 B5381 are trademarks of TYAN Computer

Corporation.

Intel, Xeon, and combinations thereof are trademarks of Intel Corpo-

ration.

AMD, Opteron, Athlon, and combinations thereof are trademarks of

AMD Corporation.

Phoenix, PhoenixBIOS, and combinations thereof are trademarks of

Phoenix Technologies.

Microsoft Windows is a trademark of Microsoft Corporation.

IBM, PC, AT, PS/2 are trademarks of IBM Corporation.

Winbond is a trademark of Winbond Electronics Corporation.

Portable Document Format (PDF) is a trademark of Adobe Corpora-

tion.

ii

Federal Communications Commission (FCC)

Notice for the USA Compliance Information State-

ment (Declaration of Conformity Procedure) DoC FCC

Part 15: This device complies with part 15 of the FCC

Rules

Operation is subject to the following conditions:

1) This device may not cause harmful interference, and

2) This device must accept any interference received including inter-

ference that may cause undesired operation. If this equipment

does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on,

the user is encouraged to try one or more of the following mea-

sures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and the

receiver.

– Plug the equipment into an outlet on a circuit different from

that of the receiver.

Consult the dealer or an experienced radio/television technician for

help.

Notice for Canada

This apparatus complies with the Class B limits for radio interference

as specified in the Canadian Department of Communications Radio

Interference Regulations. (Cet appareil est conforme aux norms de

Classe B d’interference radio tel que specifie par le Ministere Cana-

dien des Communications dans les reglements d’ineteference

radio.)

Notice for Europe (CE Mark) This product is in conformity

with the Council Directive 89/336/EEC, 92/31/EEC

(EMC).

CAUTION: Lithium battery included with this board. Do not puncture,

mutilate, or dispose of battery in fire. Danger of explosion if battery

is incorrectly replaced. Replace only with the same or equivalent

type recommended by manufacturer. Dispose of used battery

according to manufacturer instructions and in accordance with your

local regulations.

iii

About this Manual

This manual provides you with instructions on installing your

Tank GT25. This manual is intended for experienced users and inte-

grators with hardware knowledge of personal computers.

This manual consists of the following parts:

Chapter 1: Provides an introduction to the GT25 B5381 bare-

bones, packing list, describes the external compo-

nents, gives a table of key components, and pro-

vides block diagrams of the system.

Chapter 2: Covers procedures on installing the CPU, mem-

ory modules, an optional PCI-X card, and hard

drives.

Chapter 3: Covers removal and replacement procedures for

pre-installed components.

Appendix: Provides information on installing SMDC cards

and describes the differences between mainboard

BIOS and system BIOS. The cable connection

tables are also provided for reference of system

setup.

For information on the mainboard, please refer to the attached main-

board user’s manual. You can find the detailed description about

jumper and BIOS settings from the motherboard manual.

iv

SAFETY INFORMATION

Before installing and using the Tank GT25, take note of the following

precautions:

– Read all instructions carefully.

– Do not place the unit on an unstable surface, cart, or stand.

– Do not block the slots and opening on the unit, which are pro-

vided for ventilation.

– Only use the power source indicated on the marking label. If

you are not sure, contact the power company.

– The unit uses a three-wire ground cable, which is equipped

with a third pin to ground the unit and prevent electric shock.

Do not defeat the purpose of this pin. If your outlet does not

support this kind of plug, contact your electrician to replace

your obsolete outlet.

– Do not place anything on the power cord. Place the power

cord where it will not be in the way of foot traffic.

– Follow all warnings and cautions in this manual and on the

unit case.

– Do not push objects in the ventilation slots as they may touch

high voltage components and result in shock and damage to

the components.

– When replacing parts, ensure that you use parts specified by

the manufacturer.

– When service or repairs have been done, perform routine

safety checks to verify that the system is operating correctly.

– Avoid using the system near water, in direct sunlight, or near

a heating device.

– Cover the unit when not in use.

Chapter 1: Overview 1

Chapter 1: Overview

1.1 About the Tank GT25 B5381

Congratulations on your purchase of the TYAN Tank

TM

GT25

B5381, a highly-optimized rack-mountable barebone system.

The Tank GT25 B5381 is designed to support dual Intel

®

Dempsey and Woodcrest processors, providing a rich feature

set and incredible performance. Leveraging advanced tech-

nology from Intel

®

, the Tank GT25 B5381 server system is

capable of offering scalable 32 and 64-bit computing, high-

bandwidth memory design, and a lightning-fast PCI-E bus

implementation. The Tank

TM

GT25 B5381 not only empowers

your company in today’s demanding IT environment but also

offers a smooth path for future application usage.

TYAN is also proud to deliver the Tank

TM

GT25 B5381 in

SATA flavor while supporting up to four (4) hot-swap hard

drives, one (1) slim DVD-ROM, and one (1) optional slim

floppy disk drive (not included). The Tank

TM

GT25 B5381

uses TYAN’s latest tooling-made chassis featuring a robust

structure, tool-less and modularized design, and a solid

mechanical enclosure. All of this provides the Tank

TM

GT25

B5381 the power and flexibility to meet the needs of nearly

any server application.

2 Chapter 1: Overview

1.2 Features

Enclosure

• Industry 19” rack-mountable 1U

chassis storage bay

– (4) 3.5” HDD bays

– (1) slim line DVD-ROM bay

– (1) slim line FDD bay

• Dimensions: D 27.87 x W 17.17 x H

1.71 inch (708x436x43.5mm)

Processor

• Two 771 sockets

• Supports up to two Intel

®

Dempsey

(1066MHz FSB) and Woodcrest

(1333MHz FSB) processors

Chipset

• Intel 5000P Memory Controller Hub

• Intel ESB2-E I/O Controller Hub

• Winbone W83627DHG Super I/O

chip

• ADT7463 Hardware Monitoring IC

(on fan board)

Memory

• 12 dual ranked DDRII 533/667 FBD

sockets

• Supporting up to 48GB memory

size

• Four channels of Fully Buffered

DIMM (FBD)

• Supports 256MB, 512MB, 1GB,

2GB, and 4GB FB-DDRII DIMM

Expansion Slots

• Aligned (1) 64-bit/133MHz PCI-X

slot and (1) x8 PCI-E slot, support-

ing (1) ful height/full length add-on

PCI-X(M2055) or PCI-E(M2082

card

• Aligned (1) 64-bit/133MHz PCI-X

slot and (1) x16 PCI-E slot (x8 lane),

supporting (1) low-profile PCI-

X(M2057) or PCI-E(M2086) add on

card

• 2 usable expansion slots

Back I/O Ports

• (1) PS/2 mouse & keyboard port

• (1) 9-pin UART serial port

• (1) 15-pin VGA port

• (2) RJ-45 10/100/1000 ports

• (2) USB 2.0 ports

• (1) 4-port SAS connector (SSF-

8470)

Front Panel Features

•I/O

– (2) USB 2.0 ports

• LED indicators

– Power LED

– (2) LAN LEDs

– HDD active LEDs

– System warning LED

–ID LED

•Switches

– Power

– Reset

–NMI

–ID

Integrated Storage Controller

• Embedded 4-port SATA-II from

ESB2-E for models B5381G25V4H

– Supports four SATA-II ports run

ning at 3.0Gb/s

• On board LSI1068E SAS controller

for model B5381G25W4H/R

– Supports 8-port SAS ; 4 ports for

internal connection and 4 ports

for external storage connection

Storage

• Pre-installed slimtype DVD-ROM

• HDD support

– B5381G25V4H: Supports (4) hot-

swappable SATA-II HDD with

RAID 0, 1, 5, 10

– B5381G25W4H/R: Supports (4)

hot-swappable SAS/SATA-II

HDD with RAID 0, 1, 5, 10

Networking

• Intel 82563 GbE PHY supports dual

GbE ports

Video

• ATI ES1000 with 16MB frame

buffer

Chapter 1: Overview 3

Motherboard

• TYAN S5381 system board

• Customized 15”x16” (381x406mm

BIOS

• PHOENIX BIOS on 8Mbit LPC

Flash ROM

• Serial console redirect

• Supports APM 1.2 and ACPI 2.0

• PnP, DMI 2.0, WfM 2.0 power man-

agement

Server Management

• System fan speed control and moni-

toring

• Chassis intrusion alert

• Supports Tyan Server Management

(TSM)

• TYAN SMDC, IPMI 2.0 compliant

remote server management kit

(optional)

System Cooling

• (7) 40*40*56mm 15000rpm heavy-

duty fans

• (2) passive CPU heatsinks

Power Supply

• EPS 12V, 1U, 650W (1+1) redun-

dant hot-swap or 650W single

• 100V~240V AC input

Regulatory

• FCC Class B (Declaration of Con-

formity)

• CE (Declaration of Congormity)

• VCCI

•C-Tick

Environment Temperature

• Operating temperature (5

o

C~35

o

C)

• Non-operating temperature (-40

o

C

~ 70

o

C)

4 Chapter 1: Overview

1.3 Unpacking

This section describes the Tank GT25 B5381 package con-

tents and accessories.

1.3.1 Opening the Box

Open the box carefully and ensure that all components are

present and undamaged. The product should arrive pack-

aged as illustrated below.

Packaged accessories

Chapter 1: Overview 5

1.3.2 Box Contents

Component Description

Industry standard 1U chassis, (4) hot-swap

HDD bays

Tyan S5381 system board (pre-installed)

8x slim DVD-ROM drive (pre-installed)

LED and USB control board (pre-installed)

A B

C

(A) EPS 1U 650W PSU model for single

power (pre-installed)

(B) EPS 1U 650W 1+1 PSU model for

redundant power

(C) Redundant PSU power board

(7) System fans (40 mm x 56 mm)

6 Chapter 1: Overview

M1210 Adapter board

M5002

Note: In the future, an FPC cable, as shown

below, will be supplied instead of the M5002.

Component Description

Chapter 1: Overview 7

1.3.3 Accessories

If any items are missing or appear damaged, contact your

retailer or browse to TYAN’s website for service:

http://www.tyan.com.

The Web site also provides information on other TYAN prod-

ucts, plus FAQs, compatibility lists, BIOS settings, and more.

1 x Tyan Barebone Driver CD

Power Cables

Left to right: Europe, US

HDD Screws

Mounting Ears & Screws

2 x Heatsink

Barebone Manual

Riser Card

8 Chapter 1: Overview

Rail Kit

Mounting Bracket x 4

Sliding Brackets

Front L-Bracket x 2

Rear L-Bracket x 2

Screw Kit

Sliding Rail x 2

FDD Kit

FDD Backplane Cable

FDD Cable

FDD Rails & Screws

Chapter 1: Overview 9

1.4 About the Product

The following views show you the product.

1.4.1 Front View

1.4.2 Rear View

Case A (Single Power)

DVD-ROM Drive

Hard Drive Bay x 4

Power switch

Reset switch

USB ports

2 x LAN LEDs

ID Switch

ID LED

HDD activity LED

NMI switch

Warning LED

Power LED

Power Supply Socket

LAN Port (NIC2)

LAN Port (NIC1)

PS/2

Key-

board

Port

VGA

Port

PCI-X Slot

USB Ports

COM1

Port

SAS B5381G25W4H (Optional)

PCI-E

Slot

10 Chapter 1: Overview

Case B (Redundant Power)

1.4.3 LED Definitions

Front Panel

LED Color State Description

Power Green

OFF

ON

OFF

Power ON

Power OFF

HDD Activity Amber

OFF

Random Blink

OFF

HDD access activity

No disk activity

LAN1/LAN2 Linkage Green

Green

OFF

ON

Blinking

OFF

Linked to LAN

Accessing LAN

No LAN link

Warning Red

OFF

ON

OFF

Fan failiure

Normal

Hot Swappable HDD

Tray Power LED

Green

OFF

ON

OFF

Power connected

Power disconnected

Hot Swappable SATA

HDD Access LED

Amber

OFF

Random Blinking

OFF

HDD access activity

No disk activity

Hot Swappable SAS

HDD Access LED

Amber

OFF

On

Random Blinking

OFF

HDD ready

HDD access activity

HDD not ready

ID LED Blue ON System identified

Power Supply Sockets

Power Supply Fans

LAN Port (NIC2)

LAN Port (NIC1)

PS/2

Key-

board

Port

VGA

Port

PCI-X

Slot

USB

Ports

COM1

Port

SAS B5381G25W4H (Optional)

PCI-E

Slot

ID Switch

ID LED

Chapter 1: Overview 11

Rear I/O LED *

Right or Left is viewed from the rear.

LED Color State Description

RJ45 NIC1 Linkage

(Left Side)

Green

OFF

ON

Blinking

OFF

Linked to LAN

Accessing LAN

No LAN link

RJ45 NIC1 Mode

(Right Side)

Yellow

Green

OFF

ON

OFF

Gigabit mode

100M mode

10M mode

RJ45 NIC2 Linkage

(Left Side)

Green

OFF

ON

Blinking

OFF

Linked to LAN

Accessing LAN

No LAN link

RJ45 NIC2 Mode

(Right Side)

Yellow

Green

OFF

ON

OFF

Gigabit mode

100M mode

10M mode

ID LED Blue

OFF

ON

OFF

System identified

System not identified

12 Chapter 1: Overview

1.4.4 Internal View

Case A - Single Power

1. Power Supply

2. SAS Connector

3. Link Bar

4. Fully Buffered DIMM Memory

Slots

5. Fully Buffered DIMM Memory

Slots

6. CPU Sockets

7. Fans

8. M1210 Adapter Board

9. Four SATA / SAS HDD Bays

10. LED Control Board Cable

11. DVD-ROM Power Cable

12. DVD-ROM Cable

1

234

5

6

7

8

9

10

12

11

Page is loading ...

Tyan Computer Tank GT25 B5381 User manual

This manual is also suitable for

Tyan Computer Tank GT25 B5381 User manual

Related papers

Other documents