In Win IW-RA100 + 300W User manual

In Win
Brand
In Win
Model
IW-RA100 + 300W
Category
Computer cases
Type
User manual
Major Components
Front Panel Controls and Indicators
Installing Hard Drive
Installing Power Supply
IW-RA100
Chassis Quick Reference
1 x PCI Slot Expansion
(Via Riser Card)
1. Release attached screws and moving
the HDD carrier toward the side of fan
bar for detachment.
2. Assembly HDD with the carrier and
x with four screws.
3. Place HDD assembly into chassis
and x with attached screw.
1. Release two screws on
the front with PSU bracket.
2. Release two screws on chassis
bottom.
3. Release two screws on the back.
4. Moving power supply unit forward a little bit for detachment.
1. Release the screws on the side for removing top cover.
2. Then pull back to remove the top cover.
1. Release two screws to remove slim CD-ROM/DVD-ROM blank cover.
2. Assembly slim CD-ROM/DVD-ROM with four screws.
3. Slide the CD-ROM/DVD-ROM into the tray until lock.
4. Attach two screws to x the CD-ROM/DVD-ROM bracket into the chassis.
1. Put the I/O Shield inside the chassis to attach on the rear windows.
2. Attach with two screws to x I/O Shield.
A. System Reset Button
B. USB 2.0 Ports
C. HDD Activity LED
D. Power LED
E. Failure LED
F. LAN1 LED
G. LAN2 LED
H. Power On Switch
Rear I/O Access Type
Standard 12” x 9.6” ATX M/B
1U Form Factor
Power Supply
LED Module
( w/2 x USB Ports )
1 x Slim CD-ROM / DVD-ROM Carrier
Blower Fan
1 x 3.5" HDD Carrier
1 x 3.5" HDD Carrier
Installing Slim CD-ROM / DVD-ROM
I/O Shield Assembly
Top Cover Assembly
H A BD C F G E
1
2
1
3
2
2
2
1
1
3
2
4
1
2
1
3
4
4
  • Page 1 1

In Win IW-RA100 + 300W User manual

In Win
Brand
In Win
Model
IW-RA100 + 300W
Category
Computer cases
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents