Page 7
1
2
3
4
5
6
a
Network
Wireless
Adapter
Wireless
Access
Point
Wireless
Print Server
b
1
2
Connect a wireless adapter to a computer
and set the adapter to the values for the
wireless print server. See the print server
documentation for the values to use.
Continue when the print server is identified to
the network (can take up to 20 minutes).
Congratulations,
you have installed the printer! Complete the printer
warranty/registration card and install your ID software now.
Open the Printer Toolbox when Printing
Preferences opens. Click “Print Sample
Card” on the Printer Toolbox.
Your card should look like the factory card.
Set the print server IP address or network name in the
driver’s Properties>Ports>Configure dialog box.
a Insert the PCID Driver CD-ROM.
b Click “Install the Printer” after the
window opens. Choose “DIrect
Network” during installation.
IP Address:
Use HP Web Jetadmin to set up and configure the print server for
your network. Obtain the settings, including the print server IP
address or network name, from your network personnel.
Connect the printer and wireless
print server using a USB cable.
See your organization’s wireless
security policy when setting up a
wireless connection.