VIZIO L15 User Guide
Version - 4/5/2005
www.vizioce.com
1
Table of Contents
Chapter 1 - Introduction................................................................................................................................2
1.1 - Before Use ......................................................................................................................................... 2
1.2 – Specifications*................................................................................................................................... 2
1.3 - Opening the Package......................................................................................................................... 3
1.4 - Installation.......................................................................................................................................... 3
1.5 - Important Safety Guidelines............................................................................................................... 4
1.6 - Television Antenna Connection Protection ........................................................................................ 5
1.7 - Package Contents.............................................................................................................................. 6
1.8 - Front Panel ........................................................................................................................................ 7
1.9 - Rear Panel Connections .................................................................................................................... 8
1.10 - VIZIO L15 Remote Control............................................................................................................... 9
1.10.1 - Remote Control Description ..................................................................................................... 9
1.10.2 - Insertion of Batteries in the Remote Control............................................................................10
1.10.3 - Remote Control Range............................................................................................................10
1.10.4 - Precautions for the VIZIO Remote Control..............................................................................10
Chapter 2 - Connecting Components.........................................................................................................11
2.1 - Which Video Connection Should I Use? ...........................................................................................11
2.2 - Connecting Your DVD Player............................................................................................................12
2.2.1 - Using S-Video ...........................................................................................................................12
2.2.2 - Using Composite Video.............................................................................................................13
2.3 - Connecting Your VCR or Video Camera...........................................................................................13
2.4 - Connecting Coaxial (RF)...................................................................................................................14
2.4.1 – Using an Antenna .....................................................................................................................14
2.4.2 – Connecting Basic Cable Directly to the TV...............................................................................15
2.4.3 - Using Your Cable Box Connections ..........................................................................................15
2.5 - Connecting the Computer ..................................................................................................
...............16
Chapter 3 - Getting Started .........................................................................................................................17
3.1 - Turning your LCD TV On and Off......................................................................................................17
3.2 - Installation of Wall Mount (Optional) .................................................................................................17
3.3 - Adjusting Basic LCD TV Settings......................................................................................................18
3.4 - Using the On-Screen Display (OSD).................................................................................................19
3.4.1 - Menu Operations.......................................................................................................................19
3.4.2 - OSD Menus and Options ..........................................................................................................20
3.4.3 - Using the Parental Controls ......................................................................................................24
3.4.4 - Setting a Password ...................................................................................................................25
Chapter 4 - Maintenance and Troubleshooting.........................................................................................26
4.1 - Maintenance .....................................................................................................................................26
4.2 - Troubleshooting Guide......................................................................................................................26
4.3 - Telephone & Technical Support........................................................................................................27
4.4 - Compliance .......................................................................................................................................28
4.5 - FCC Class B Radio Frequency Interference Statement....................................................................28
Appendix A: Glossary - Standard Definitions...........................................................................................29
Appendix B: VIZIO LCD Television Warranty............................................................................................30
VIZIO L15 User Guide
Version - 4/5/2005
www.vizioce.com
2
Chapter 1 - Introduction
1.1 - Before Use
Congratulations on your VIZIO L15 15” LCD Television purchase. Thank you for your support of
VIZIO and its LCD Television product line. The L15 is a precise electronic product and you
should read the following instructions carefully to maximize the performance of the product. It has
passed regulatory safety certifications and you can be assured of the highest quality display with
the utmost reliability. After you have finished reading the instructions, put them away in a safe
place for future reference.
1.2 – Specifications*
Panel: 15" Diagonal, 4:3 Aspect Ratio, TFT Panel
Resolution: 1024 x 768 pixels
Display Compatibility: SDTV (480i) Native
Signal Compatibility: 480i (SDTV)
Response Time: 25mS (typical)
Brightness: 300 nits (typical)
Contrast: 450:1 (typical)
Viewing Angle: 150 degrees (H) / 110 degrees (V) for CR>5
Inputs:
1 x RF (1 x F Connector for internal NTSC Tuner), 1 x Composite Video (1 x RCA), 1 x
RGB D-Sub (1 x analog RGB), 1 x S-Video (1xDIN) plus 2 x Audio (2 x RCA, L+R)
Features:
CC, V-Chip, Comb Filter, Scalar and De-Interlacer, NTSC Video Decoding via RF
Antenna, Cable or Satellite (Set Top Box may be required)
Speakers: Built-in 2 x 2 W
Lamp Life: 50,000 hours (typical)
Operating Environment:
Temperature: 5~35°C (41~95°F)
Humidity: 10%~90% (no-condensation)
Altitude: 0~10,000 ft.
Storage Environment:
Temperature: -20~60°C (-4~140°F)
Humidity: 10%~90% (no-condensation)
Altitude: 0~40,000 ft.
Power Input: IEC connector for power line connection.
Voltage Range: 100-240 Vac at 50/60 Hz
Power consumption: 60W
Dimensions: 18.5" (w) x 11.4" (h) x 3.33" (d) without Stand, 18.5”(w) x 13.05” (h) x 6.9” (d) with Stand
Net Weight: 10.14 lbs (4.6 kg) with stand
Gross Weight: 15.4 lbs (7.0 kg)
Certifications: UL, C-UL, FCC Class B
*Product specifications are subject to change without notice or obligation.
Note: In some countries or regions, the shape of the power plug and power outlet may
sometimes differ from that shown in the explanatory drawings. However, the method of
connecting and operating the unit is the same.
VIZIO L15 User Guide
Version - 4/5/2005
www.vizioce.com
3
1.3 - Opening the Package
• The VIZIO L15 is packaged in a carton together with other standard accessories. Any
optional accessories are packed separately in another carton.
• Never place the unit on a surface with the glass facing downwards unless it is on protective
padding.
• When opening the carton, check that the product is in good condition and that all standard
accessories and items are included.
• Save the original box and all packing materials for future shipping needs.
1.4 - Installation
• Please read the user manual carefully before performing the installation.
• The power consumption of the display is approximately 60 Watts. Please use the power cord
designated for the product. When an extension cord is required, use one with the correct
power rating. The cord must be grounded and the grounding feature must not be defeated.
• The product should be installed on a flat surface to avoid tipping. Space should be
maintained between the back of the product and the wall for proper ventilation. See Section
3.2 - Installation of Wall Mount, page 17, for additional information.
• Please ensure the product is installed with the screen in landscape orientation. Any 90°
clockwise or counterclockwise installation may induce poor ventilation and subsequent
component damage.
VIZIO L15 User Guide
Version - 4/5/2005
www.vizioce.com
4
1.5 - Important Safety Guidelines
This product is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire.
To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of the
product. Read the following safety instructions before operating the display. Keep these instructions in a safe place for future
reference.
• To avoid the risk of electric shock or component damage, switch off the power before connecting other components to the L15
LCD TV.
• Unplug the power cord before cleaning the L15 LCD TV. A damp cloth is sufficient for cleaning the L15 LCD TV. Do not use a
liquid or a spray cleaner for cleaning the product. Do not use abrasive cleaners.
• Always use the accessories recommended by the manufacturer to insure compatibility.
• When moving the L15 LCD TV from an area of low temperature to an area of high temperature, condensation may form on the
housing. Do not turn on the L15 LCD TV immediately after this to avoid causing fire, electric shock or component damage.
• Do not place the L15 LCD TV on an unstable cart, stand, or table. If the L15 LCD TV falls, it can injure a person and cause
serious damage to the appliance.
• A distance of at least 2 feet should be maintained between the L15 LCD and any heat source, i.e. radiator, heater, oven,
amplifier etc. Do not install the product close to smoke. Operating the product close to smoke or moisture may cause fire or
electric shock.
• Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of the L15
LCD TV and to protect it from overheating, be sure these openings are not blocked or covered. Do not place the L15 LCD TV
in a bookcase or cabinet unless proper ventilation is provided.
• Never push any object into the slot on the L15 LCD TV cabinet. Do not place any objects on the top of the product. It could
short circuit parts causing a fire or electric shock. Never spill liquids on the L15 LCD TV.
• The L15 LCD TV should be operated only from the type of power source indicated on the label. If you are not sure of the type
of power supplied to your home, consult your dealer or local power company.
• The power cable must be replaced when using different voltage from that specified in the User Manual. For more information,
contact your dealer.
• The L15 LCD TV is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into
a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have an electrician
install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety purpose of the grounded
plug.
• Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
• The wall socket shall be installed near the equipment and shall be easily accessible.
• Only the marked power source can be used for the product. Any power source other than the specified one may cause fire or
electric shock.
• Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power cord during electrical storms.
• Unplug the unit during a lightening storm or when it will not be used for long period of time. This will protect the L15 LCD TV
from damage due to power surges.
• Do not attempt to repair or service the product yourself. Opening or removing the back cover may expose you to high
voltages, the risk of electric shock, and other hazards. If repair is required, please contact your dealer and refer all servic
ing to
qualified service personnel.
• Keep the product away from moisture. Do not expose this appliance to rain or moisture. If water penetrates into the product,
unplug the power cord and contact your dealer. Continuous use in this case may result in fire or electric shock.
• Do not use the product if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact
your dealer immediately. Do not try to repair the product yourself.
• Avoid using dropped or damaged appliances. If the product is dropped and the housing is damaged, the internal components
may function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued use of the
product may cause fire or electric shock.
• Follow instructions for moving the product. Ensure that the power connector and any other cables are unplugged before
moving the product.
• Hold the power connector when removing the power cable. Pulling the power cable itself may damage the wires inside the
cable and cause fire or electric shock. When the product will not be used for an extended period of time, unplug the power
connector.
• To avoid risk of electric shock, do not touch the connector with wet hands.
• Insert batteries for the remote control in accordance with instructions. Incorrect polarities may cause damage and leakage of
the batteries, operator injury and contamination the remote controller.
• If any of the following occurs please contact the dealer:
o The power connector fails or frays.
o Liquid sprays or any object drops into the L15 LCD TV.
o The display is exposed to rain or other moisture.
o The display is dropped or damaged in any way.
o The performance of the Display changes substantially.
• Operating environment: Temperature: 5°C ~ 35°C (41°F ~ 95°F), Humidity: 10% to 90% non-condensing
VIZIO L15 User Guide
Version - 4/5/2005
www.vizioce.com
5
1.6 - Television Antenna Connection Protection
External Television Antenna Grounding
If an outside antenna or cable system is to be connected to the LCD TV, make sure that the
antenna or cable system is electrically grounded to provide some protection against voltage
surges and static charges.
Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides information with regard to
proper grounding of the mast and supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of the grounding conductors, location of antenna discharge unit,
connection to grounding electrodes, and requirements of the grounding electrode. See figure
below for proper configuration.
Lightning Protection
For added protection of the LCD TV during a lightning storm or when it is left unattended or
unused for long periods of time, unplug the LCD TV from the wall outlet and disconnect the
antenna or cable system.
Power Lines
Do not locate the antenna near overhead light or power circuits, or where it could fall into such
power lines or circuits.
Note to the CATV system installer: This reminder is provided to call the CATV system installer's
attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular,
specifies that the cable ground shall be connected to the grounding system of the building, as close to
the point of cable entry as practical.
VIZIO L15 User Guide
Version - 4/5/2005
www.vizioce.com
6
1.7 - Package Contents
VIZIO L15 15” LCD TV
Standard Remote Control
Power Cord and DC Adapter
Audio Cable and adapter
Video Adapter
Quick Set up Guide
Registration Card
Warranty Information
This User Guide
IMPORTANT: Save the original box and all the packing material for future shipping needs.
Note: Your product may also include various other accessories depending on region of
purchase.
VIZIO L15 User Guide
Version - 4/5/2005
www.vizioce.com
7
1.8 - Front Panel
Use the buttons on the front panel control to display and adjust the On Screen Display (OSD).
1) Volume - /+ – These buttons are used to increase or decrease the speaker volume. While the
OSD is active, these buttons function as adjustment controls in the OSD menus.
2) Channel d/c – These buttons are used to increase or decrease the selected channels. While
the OSD is active, these buttons function as select controls in the OSD menus.
3) Menu – When this button is pressed, the OSD main menu will appear on the screen. If it is
pressed while the main menu is displayed, the main menu will disappear. If pressed while an
OSD sub menu is displayed, it will exit the sub menu and go back to the last menu.
4) Audio – This button switches between the available audio sources in the following sequence:
TV, Audio 1 (PC), or Audio 2 (AV).
5) Input – This button switches between the available input sources in the following sequence:
AIR (TV), PC Mode (RGB), and Video (AV or S-Video).
6) Power – Switch the TV on by pressing the button once. Press the button again to turn the TV
off. If the TV is plugged in, but powered off, the indicator light will be orange.
7) Remote Control Sensor – This is the window that passes all of the remote signals to the
sensor. Point the remote control directly at this window for the best response to the remote
signal.
Note: In all submenus, the cursor movement is circulatory. For example, if the
d
Ch button is
pressed when the cursor is on the last item in the submenu, the cursor will move to the main
icon.
1 2 3 4 5 6
7
VIZIO L15 User Guide
Version - 4/5/2005
www.vizioce.com
8
1.9 - Rear Panel Connections
1. DC In – Connect one end of the DC Adapter here and connect the power cord to a
properly grounded outlet.
2. Analog (RGB) – Connect the analog (RGB) input to external video source such as a PC.
3. Audio Input
a) Audio 1 – Connect the external audio from a PC source.
b) Audio 2 – Connect the external audio from the video source such as a DVD player or
set-top box.
Note: Please use the audio cable adapter supplied by VIZIO when connecting external
audio to the L15 LCD TV.
4. Audio Out – Connect the internal audio to an external amplifier or receiver.
5. TV – Connect to the antenna, satellite or cable service source.
6. S-Video – Connect the S-Video input to external video device such as VCR, DVD and
video games.
7. AV – Connect the composite video input to external video device such as VCR, DVD and
video games.
1 2
3a 3b
4
5
6
7
VIZIO L15 User Guide
Version - 4/5/2005
www.vizioce.com
9
Favorites
1.10 - VIZIO L15 Remote Control
1.10.1 - Remote Control Description
1. Video Source - Press this button to select the video input
source: PC mode, Video and TV (AIR).
2. Audio Source - Press this button to select the video input
source: Audio 1: PC, Audio 2: AV and TV.
3. Status - Press this button to display the current system
status (i.e., channel, input source, etc.).
4. Picture/AUTO - Press this button to Auto adjust the PC function. Also press this button
to adjust some of the LCD TV monitor picture menu items. Please see Section 3.4.2.5 –
Image Adjust, page 23 for additional details regarding the PC functions.
5. Sleep - Press this button to set the LCD TV Monitor to turn itself off within a certain time.
Choose from the following options: 30, 60, 90 or 120 minutes. Please see Section
3.4.2.4a- Features for TV and Video Mode, page 22 for additional details.
6. MTS - Press this button to select a sound mode if available with the TV programming:
Mono, Stereo and SAP. Please see Section 3.4.2.3 - Sound, page 21 for additional
details.
7. Mute - Press this button to eliminate or restore the LCD TV Monitor sound. Mute on will
appear on the screen when the sound is muted.
8. VOL (-/+) - Press these buttons to decrease or increase the
sound. Also press to select or adjust items in the OSD (on-
screen display) menu.
9. CH (UP/DN) - Press these buttons to adjust the channel up or
down. Also press to select or adjust items in the OSD (on-
screen display) menu.
10. Menu - Press this button to open the OSD (on-screen display)
menu. Also this button will allow you to exit the OSD menu.
11. Favorites - Press this button to store your favorite channel.
Please see Section 3.4.2.1 – TV Install, page 20 for additional
details.
12. Number buttons - Press this button to select TV channels.
When selecting single-digit channels, then press the number of
the desired channel. Note: The LCD TV monitor will pause for a
few seconds then tune to the selected channel.
13. A/CH button - Press this button to alternate from current
channel selection to previous channel selection.
Note: The remote control layout is for reference only.
VIZIO L15 User Guide
Version - 4/5/2005
www.vizioce.com
10
1.10.2 - Insertion of Batteries in the Remote Control
Insert two AAA batteries into the remote control. Make sure that you match
the (+) and (-) symbols on the batteries with the (+) and (-) symbols inside the
battery compartment. Re-attach the battery cover.
Precautionary Tips for Inserting the Batteries:
• Only use the specified AAA batteries.
• Do not mix new and old batteries. This may result in cracking or
leakage that may pose a fire risk or lead to personal injury.
• Inserting the batteries incorrectly may result in cracking or leakage
that may pose a fire risk or lead to personal injury.
• Dispose of the batteries in accordance with local laws and
regulations.
• Keep the batteries away from children and pets.
1.10.3 - Remote Control Range
• Point the remote control at the remote control sensor to transmit the commands.
• Do not place any obstacles between the remote control and the receiver window.
• The effective range of the remote control is approximately 6 feet (2 meters) from the front
of the receiver window, 30º to the left and right, 20º up and down.
1.10.4 - Precautions for the VIZIO Remote Control
• Remote control should be kept dry and away from heat sources. Avoid humidity.
• If the display responds erratically to the remote control or does not respond at all, check
the batteries. If the batteries are low or exhausted, replace them with fresh batteries.
• When not using the remote control for a long period of time, remove the batteries.
• Do not take apart the batteries, heat them, or throw them into a fire.
• Do not subject the remote control to undue physical stress, such as striking or dropping it.
• Do not attempt to clean the remote control with a volatile solvent. Wipe it with a clean,
damp cloth.
VIZIO L15 User Guide
Version - 4/5/2005
www.vizioce.com
11
Chapter 2 - Connecting Components
2.1 - Which Video Connection Should I Use?
The VIZIO L15 LCD TV has four different ways to connect your video equipment from a basic one
to the most advanced for digital displays.
Connection
Quality
Cable and Connector Description
OK
Coaxial RF. This is the only connection that has the audio
and the video in one cable. If you have an antenna or
cable, this is the only way you can connect it to the LCD
TV. If you have a VCR, you can connect your
antenna/cable to the VCR RF Input and connect the VCR
RF Output to this connector.
Basic
Composite. The complete video signal is carried through
this single pin connector. This is the most commonly used
video connection.
Good
S-Video. The video signal is separated into two signals,
one containing the black-and-white information and the
other containing the color information. Separating the
color in this way avoids ‘cross color’ effects where closely
spaced black and white lines are erroneously displayed in
color. It also enables text to be displayed more sharply.
VIZIO L15 User Guide
Version - 4/5/2005
www.vizioce.com
12
2.2 - Connecting Your DVD Player
You have several options for connecting your DVD player to your new L15 LCD TV - S-Video and
Composite inputs. Based on your home theater configuration, you can decide which option is the
right one for you.
2.2.1 - Using S-Video
Installation:
1. Turn off the power to the LCD TV and DVD player.
2. Connect the S-Video jack on the rear of your DVD player to the S-Video jack on the back
of your LCD TV.
3. Connect the audio cables (red and white) to the AUDIO OUT (left and right) jacks on the
DVD player.
4. Connect the other end of the cables to the audio cable adapter (provided).
5. Connect the audio cable adapter to the AUDIO 2 jack on the rear of the LCD TV Monitor.
6. Turn on the power to the LCD TV and DVD player.
7. Select “Video” using the Video Source button on the remote control. Then Select “Audio
2: AV” using the Audio Source button on the remote control.
Note: Refer to your DVD player user manual for more information about the video output
requirements of the product.
VIZIO L15 User Guide
Version - 4/5/2005
www.vizioce.com
13
2.2.2 - Using Composite Video
Installation:
1. Turn off the power to the LCD TV and DVD player.
2. Connect the Video/Composite
(yellow color) connector on the rear of your DVD player to
the Video connector on the back of your LCD TV.
3. Connect the audio cables (red and white) to the AUDIO OUT (left and right) jacks on the
DVD player.
4. Connect the other end of the cables to the audio cable adapter (provided).
5. Connect the audio cable adapter to the AUDIO 2 jack on the rear of the LCD TV Monitor.
6. Turn on the power to the LCD TV and DVD player.
7. Select “Video” using the Video Source button on the remote control. Then Select “Audio
2: AV” using the Audio Source button on the remote control.
2.3 - Connecting Your VCR or Video Camera
Installation:
1. Turn off the power to the LCD TV and VCR or video camera.
2. Connect the S-Video jack on your VCR or video camera to the S-Video jack on the back
of your LCD TV.
3. Connect the audio cables (red and white) to the AUDIO OUT (left and right) jacks on the
VCR or video camera.
4. Connect the other end of the cables to the audio cable adapter (provided).
5. Connect the audio cable adapter to the AUDIO 2 jack on the rear of the LCD TV Monitor.
6. Turn on the power to the LCD TV and VCR or video camera.
7. Select “Video” using the Video Source button on the remote control. Then Select “Audio
2: AV” using the Audio Source button on the remote control.
Note: Refer to your DVD player user manual for more information about the video output
requirements of the product.
Note: Refer to your VCR or video camera user manual for more information about the video
out
p
ut re
q
uirements of the
p
roduct.
VIZIO L15 User Guide
Version - 4/5/2005
www.vizioce.com
14
2.4 - Connecting Coaxial (RF)
There are several options for connecting your antenna or cable to your new L15 LCD TV –directly
to the TV or through your VCR. Based on your home theater configuration, you can decide which
option is the right one for you.
2.4.1 – Using an Antenna
You can decide to either connect the antenna directly to your TV or through a VCR based on how
you would like to set it up for your home.
2.4.1.1 - Connecting the Antenna to the TV
Installation:
1. Turn off the power to the LCD TV.
2. If your antenna has a round cable
(75 ohm) on the end, then you're
ready to connect it to the LCD TV
Monitor.
Note: If your antenna has flat,
twin-lead wire (300 ohm), you first
need to attach the antenna wires
to the screws on a 300- to 75-ohm
adapter.
3. Connect the antenna (or adapter)
to the TV jack on the rear of the LCD TV Monitor. If the end of the antenna wire is
threaded, screw it down tightly.
4. Turn on the power to the LCD TV.
5. Select “AIR” using the Video Source button on the remote control. Select “TV” using the
Audio Source button on the remote control.
2.4.1.2 – Connecting the Antenna through Your VCR
Installation:
1. Turn off the power to the LCD TV and
VCR.
2. Connect the “Output to TV” (RF Out
or Antenna Out) connector on the
rear of your VCR to the TV connector
on the rear of your LCD TV.
3. Turn on the power to the LCD TV and VCR.
4. Select “AIR” using the Video Source button on the remote control. Select “TV” using the
Audio Source button on the remote control.
5. Select Channel 3 or 4 to match the channel selected on the rear of your VCR.
Note:
a) If you have an off-air antenna or cable TV, connect the off-air antenna or TV cable to
the RF connector on the rear of your VCR.
b) Make sure the antenna or cable TV is correctly grounded.
VIZIO L15 User Guide
Version - 4/5/2005
www.vizioce.com
15
2.4.2 – Connecting Basic Cable Directly to the TV
Installation:
1. Turn off the power to the LCD TV.
2. Connect the Cable TV signal to the TV
jack on the LCD TV Monitor. Screw it
down tight.
3. Turn on the power to the LCD TV.
4. Select “AIR” using the Video Source
button on the remote control. Select
“TV” using the Audio Source button on the remote control.
2.4.3 - Using Your Cable Box Connections
2.4.3.1 - Cable Box with RF In/Out Jacks
Note: This connection will not supply Stereo sound to the LCD TV Monitor. The sound from the
Cable Box will be monaural (single-channel, not left and right).
Installation:
1. Turn off the power to the LCD TV.
2. Connect the Cable TV signal to the IN jack
(i.e., “RF IN” or “CABLE IN”) on the Cable
Box.
3. Connect the RF coaxial cable to the OUT jack
(i.e., “TO TV” or “RF OUT”) of the Cable Box.
4. Connect the other end of the coaxial cable to
the LCD TV Monitor’s TV jack. Screw it down tightly.
5. Turn on the power to the LCD TV.
6. Set the Channel 3 or 4 (or Output channel) switch of the Cable Box to 3 or 4.
7. Set the TV to the same channel. When watching TV programming, change channels at
the Cable Box, not the LCD TV Monitor.
Note:
a) Make sure the antenna is correctly grounded.
b) See Section 3.4.2.1 – TV Install page 20 for selecting the TV source within the
OSD menus (cable or air (antenna)).
VIZIO L15 User Guide
Version - 4/5/2005
www.vizioce.com
16
2.4.3.2 - Cable Box with Audio/Video Out Jacks
Note: This connection will supply Stereo sound to the LCD TV Monitor.
Installation:
1. Turn off the power to the LCD TV.
2. Connect the Cable TV signal to the IN jack (or RF IN or CABLE IN) on the Cable Box.
3. Using an RCA-type video cable, connect one end of the video cable to the Video Out jack
of the Cable Box. Connect the other end of the cable to the yellow VIDEO jack on the
rear of the TV.
4. Connect the audio cables (red and white) to the AUDIO OUT (left and right) jacks on the
cable box.
5. Connect the other end of the cables to the audio cable adapter (provided).
6. Connect the audio cable adapter to the AUDIO 2 jack on the rear of the LCD TV Monitor.
7. Turn on the power to the LCD TV.
8. Select “Video” using the Video Source button on the remote control. Then Select “Audio
2: AV” using the Audio Source button on the remote control.
2.5 - Connecting the Computer
Installation:
1. Turn off the power to the LCD TV and Computer.
2. Connect a 15-pin D-sub RGB cable to the RGB output of your
computer and the other end to the Analog input in the rear of
your LCD TV.
3. Connect the audio to the AUDIO 1 jack on the rear of the LCD
TV Monitor.
4. Turn on the power to the LCD TV and your computer.
5. Select “PC Mode” using the Video Source button on the remote
control. Select “Audio1: PC” using the Audio Source button on
the remote control.
VIZIO L15 User Guide
Version - 4/5/2005
www.vizioce.com
17
Figure 3.2.a
Figure 3.2.b
Chapter 3 - Getting Started
3.1 - Turning your LCD TV On and Off
1. Plug the DC adapter into the DC IN jack on the back side of the LCD TV Monitor, then
plug the power cable into a properly grounded outlet.
2. Press the POWER button on the front panel or the POWER button on the remote control
to turn on the LCD TV. The POWER indicator on the front panel will light green.
3. Select the input source for the LCD TV using the Video Source button on the remote
control and select the audio source for the LCD TV using the Audio Source button on the
remote control
4. If connecting to antenna, cable or other RF source on TV inputs, see 3.4.2.1 – TV Install
page 20 to configure the product to receive all available channels.
3.2 - Installation of Wall Mount (Optional)
If you would like to mount your L15 LCD TV to the wall, you can contact VIZIO directly at
www.vizioce.com
or your local dealer to obtain the appropriate wall mounting kit. To convert your
LCD TV from a desk-mounted to a wall-mounted display, follow the instructions below.
1. Turn off the LCD TV and disconnect the DC adapter
from the back of the LCD TV.
2. Lay the LCD TV face down on a towel or blanket to
protect the screen from damage.
3. Unscrew the 4 set screws (see Figure 3.2.a) that hold
the stand to the bottom of the LCD TV. Please make
sure to keep a hold of the stand so that it does not
fall once the screws are loosened.
4. Remove the stand carefully from the back of the TV. Please make sure to keep the 4
screws and washers that were removed with the stand in safe place for future use.
5. Place the VESA plate adapter included in the accessory box
to the back of the LCD TV centered over the 4 screw holes
in Figure 3.2.b. This will allow the mount to fit flush on the
back of the LCD TV.
6. Attach the mount to the TV through the VESA plate adapter
by utilizing the 4 screw holes also included in the accessory
box to the center of the back of the LCD TV (see Figure
3.2.b). Please make sure to follow the kit instructions that
shipped with your mount for proper installation.
VIZIO L15 User Guide
Version - 4/5/2005
www.vizioce.com
18
3.3 - Adjusting Basic LCD TV Settings
Volume
To increase the volume, press and hold the VOL + button on the front panel or remote
control until the desired level is reached.
To decrease the volume, press and hold the - VOL button on the front panel or remote
control until the desired level is reached.
TV Channels
To step up through the available TV channels, press the CH + button on the front panel
or remote control once for the next channel or hold it depressed until the desired channel
is reached.
To step down through the available TV channels, press the - CH button on the front panel
or remote control once for the previous channel or hold it depressed until the desired
channel is reached.
Mute
Press the MUTE button on the remote control to turn off the sound; press the button
again to cancel the MUTE feature and turn the sound on.
VIZIO L15 User Guide
Version - 4/5/2005
www.vizioce.com
19
3.4 - Using the On-Screen Display (OSD)
The remote control or the control keys on the top panel of the LCD TV can control all the function
settings. The on-screen display (OSD) allows you to adjust and save contrast, brightness and
other settings. The LCD TV will save changes made to the settings even if the LCD TV is turned
off.
3.4.1 - Menu Operations
The OSD consists of a Main Menu of items and each of these items has a Sub Menu associated
with it that the OSD will switch to when the item is selected.
1. Press the MENU button on the remote control and the Main Menu will be displayed on
the screen.
2. Use the c/d buttons on the remote control to
highlight the feature you wish to select within the OSD
menu.
3. Use the e/fbuttons on the remote control to enter or
exit the submenus, featured opposite with the TV
Install Menu highlighted.
4. Use the c/d buttons again on the remote control to
highlight the feature you wish to select within the OSD
menu.
5. Use the e/fbuttons on the remote control to make the
necessary adjustments.
6. Press the MENU button on the remote control to confirm
the desired selection.
7. Repeat steps 3 and 6 to adjust additional options within
the selected OSD menu.
8. Once you have finished making adjustments within the selected OSD menu, press the
MENU button on the remote to move to the next page (for example, Sound Menu).
9. Once all the adjustments are completed, press the Menu button on the remote control
repeatedly to exit the OSD.
NOTE: The OSD menu display will disappear automatically after 30 seconds if no action is taken.
Note: The menu options are determined by the input you have selected as the video source.
For instance, if you have the TV mode selected, you will only see those applicable menus.
Please see Section 3.4.2 - OSD Menus and Options on the following pages for further details.
VIZIO L15 User Guide
Version - 4/5/2005
www.vizioce.com
20
3.4.2 - OSD Menus and Options
You will see some changes within the OSD Menu options based on the inputs (TV, PC or Video).
If the options are different, it will be noted in the description of each OSD menu on the following
pages.
3.4.2.1 – TV Install
Note: This is only available in TV mode.
Favorite – Sets up channels in a quick viewing list. The button
on the remote control will then be used to switch between
different TV programs.
To program, following the steps below:
1. Tune the specific channel you want to add to the Favorite
Feature.
2. Press the Menu button and highlight the TV Install menu by
using the c/d buttons on the remote control.
3. Press the e/fbuttons on the remote control to enter into the
TV Install Menu.
4. Press the c/d buttons on the remote control to select Favorite.
5. Press the e/fbuttons on the remote control to highlight YES to add the channel to your Favorite
list or No to remove the channel from the listing.
6. Press the Menu button to exit.
Tuner Mode – Allows the user to change the signal input to Cable or Air (antenna). Note: when
cable is selected, channels 1-125 are available. When AIR (antenna) is selected, channels
2-69 are available.
Auto Program – Automatically sets the LCD TV for local area (or cable TV) channels. Note: an
antenna or cable TV signal must first be connected to the LCD TV.
Store – Allows the user to edit the channel listing by manually adding or deleting channels. Note:
If the user would like add or delete a channel, the user must first have the channel selected
on the LCD TV, and then enter the TV Install OSD menu.
To program, following the steps below:
1. Tune the specific channel you want to add to the Store Feature.
2. Press the Menu button and highlight the TV Install menu by using the c/d buttons on the remote
control.
3. Press the e/fbuttons on the remote control to enter into the TV Install Menu.
4. Press the c/d buttons on the remote control to select Store.
5. Press the e/fbuttons on the remote control to highlight YES to add the channel to the Store
memory list or No to remove the channel from the listing.
6. Press the Menu button to exit.
Fine Tune – Allows the user to adjust the television picture reception in areas of weak signal
reception.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
