2. Computers & electronics
  3. Audio & home theatre
  4. Home audio sets
  5. Philips
  6. MCM166
MCM166

Philips MCM166, MCM166/05 Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the Philips MCM166 Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
MCM166
What’s in the Box?
You should nd these items upon opening the box.
Quick Start Guide
Remote Control
Quick Start Guide
User Manual
1 x MP3 link cable
MCM166_05_QSG_Eng.indd 1 9/28/2009 11:05:39 AM
1
2
Connect the speaker cables.
Speaker
(right)
Speaker
(left)
FM antenna
AC power
Tip
See the User Manual on how to
connect other equipment to this
system.
Connect the AC power cord to the wall
socket.
5
3
7
6
4
2
Set clock
1
Press and hold CLOCK (or CLOCK/DISPLAY on the remote control) to activate the clock
setting mode.
The 12 hour or 24 hour format is displayed.
«
Press PROG repeatedly to select 12 hour or 24 hour format.
Press CLOCK (or CLOCK/DISPLAY on the remote control) to conrm.
The hour digits are displayed and begin to blink.
«
Press
§
/
∞
(or
5
/
6
on the remote control) to set the hour.
Press CLOCK (or CLOCK/DISPLAY on the remote control) to conrm.
The minute digits are displayed and begin to blink.
«
Press
§
/
∞
(or
5
/
6
on the remote control) to set the minute.
Press CLOCK (or CLOCK/DISPLAY on the remote control) to conrm.
MCM166_05_QSG_Eng.indd 2 9/28/2009 11:05:40 AM
4
3
2
1
Play disc
Press SOURCE (or DISC on the remote control) to select the disc source.
Lift the top panel to open the disc tray.
Insert a disc with the printed side facing up, then close the disc tray.
Press
ÉÅ
to start play.
To stop play, press
9
.
5
1
2
3
Insert the USB device’s USB plug into the socket
on the main unit.
Press SOURCE once or more (or USB on the remote control) to select USB.
Play the USB’s audio les as you do with the albums/tracks on a CD.
Play USB
With the Hi-Fi system, you can use USB ash memory (USB 2.0 or USB1.1),
USB ash players
(USB 2.0 or USB1.1)
,
memory cards (requires an additional card reader to
work with this Hi-Fi system).
MCM166_05_QSG_Eng.indd 3 9/28/2009 11:05:41 AM
1
2
3
Press SOURCE (or TUN on the remote control) repeatedly to select FM or MW.
Press PROG for more than two seconds to program all available stations in order of wave-
band.
Press PRESET/ALBUM +/- (or ABL/PRESET +/- on the remote control) to select a preset
number.
Listen to radio
MCM166_05_QSG_V1.0
Tip
Detailed play features and additional functions are described in the supplied user
manual.
C
Royal Philips Electronics N.V. 2009
All rights reserved.
http://www.philips.com
MCM166_05_QSG_Eng.indd 4 9/28/2009 11:05:41 AM
/