2. Philips
  3. MCD107/51

Philips MCD107/51 User manual

  • Hello! I am an AI chatbot trained to assist you with the Philips MCD107/51 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
MCD107
What’s in the Box?
You should fi nd these items upon opening the box.
Quick Start Guide
Remote Control
Quick Start Guide
User Manual
Audio/video cable MP3 link cable
MCD107_51_QSG_Eng.indd 1MCD107_51_QSG_Eng.indd 1 8/20/2009 11:45:30 AM8/20/2009 11:45:30 AM
In standy-by mode, press and hold CLOCK/DISPLAY to activate the clock setting mode.
The 12 hour or 24 hour format is displayed.
»
Press PROG repeatedly to select 12 hour or 24 hour format.
Press CLOCK/DISPLAY to confi rm.
The hour digits are displayed and begin to blink.
»
Press
5
/
6
to set the hour.
Press CLOCK/DISPLAY to confi rm.
The minute digits are displayed and begin to blink.
»
Press
5
/
6
to set the minute.
Press CLOCK/DISPLAY to confi rm.
3
4
5
6
7
1
2
Connect the speaker cables.
Speaker
(right)
Speaker
(left)
FM antenna
AC power
Tip
See the User Manual for how to connect
other equipment to this apparatus.
2
Set clock
1
Connect the AC power cord to the wall
socket.
MCD107_51_QSG_Eng.indd 2MCD107_51_QSG_Eng.indd 2 8/20/2009 11:45:35 AM8/20/2009 11:45:35 AM
3
2
1
Play discs
Press DISC to select the disc source.
Press
/
to open the disc compartment.
Insert a disc with the printed side facing up, then close the disc door.
Play starts automatically.
»
To stop play, press • 9 .
1
2
Insert the USB plug of a USB device into the socket.
Press USB .
Play starts automatically. If not, press
» 2; .
Play from USB devices
With the apparatus, you can use USB fl ash memory (USB 2.0 or USB1.1),
USB fl ash players
(USB 2.0 or USB1.1)
,
memory cards (requires an additional card reader to
work with this apparatus).
MCD107_51_QSG_Eng.indd 3MCD107_51_QSG_Eng.indd 3 8/20/2009 11:45:36 AM8/20/2009 11:45:36 AM
1
2
3
Press TUNER to select FM.
Press and hold PROG/ANGLE for more than 2 seconds.
All available stations are programmed in the order of waveband reception strength.
»
The fi rst programmed radio station is broadcast automatically. »
Press
¡
or
™
until the desired preset station is displayed.
Programming and tuning to radio stations
MCD107_51_QSG_V1.0
Tip
Detailed playback features and additional functions are described in the accompanied
owner's manual.
C
Royal Philips Electronics N.V. 2009
All rights reserved.
http://www.philips.com
MCD107_51_QSG_Eng.indd 4MCD107_51_QSG_Eng.indd 4 8/20/2009 11:45:37 AM8/20/2009 11:45:37 AM
/