Vanderbilt CMTC2315 User manual

Brand: Vanderbilt

Model: CMTC2315

Category: TVs & monitors

Type: User manual

Vanderbilt CMTC2315 is a wide screen TFT monitor that is ideally suited for use with digital video recorders (DVR) and PC applications. It has a very high contrast ratio and brightness combined with a viewing angle of 160˚ H/V. The PiP/PbP function (Picture-in-Picture / Picture-by-Picture) extends the monitor to a real security monitor. The monitor has two BNC video inputs with loop-through outputs, one DVI and one HDMI input for DVR- and PC-based applications. In addition, it is equipped with 2 audio inputs and outputs and built-in speakers.

CMTC2315

TFT-LED Monitor

User Manual

Liefermöglichkeiten und technische Änderungen vorbehalten.

Data and design subject to change without notice. / Supply subject to availability.

Wir behalten uns alle Rechte an diesem Dokument und an dem in ihm dargestellten Gegenstand vor. Der Empfänger erkennt diese Rechte

an und wird dieses Dokument nicht ohne unsere vorgängige schriftliche Ermächtigung ganz oder teilweise Dritten zugänglich machen oder

außerhalb des Zweckes verwenden, zu dem es ihm übergeben worden ist.

We reserve all rights in this document and in the subject thereof. By acceptance of the document the recipient acknowledges these rights

and undertakes not to publish the document nor the subject thereof in full or in part, nor to make them available to any third party without our

prior express written authorization, nor to use it for any purpose other than for which it was delivered to him.

1 About this document .................................................................................... 4

2 Safety .............................................................................................................. 5

2.1 Target group .................................................................................................... 5

2.2 General safety precautions ............................................................................. 5

2.3 Transport ......................................................................................................... 5

2.4 Installation ....................................................................................................... 6

2.5 Operation ......................................................................................................... 6

2.6 Service and maintenance ................................................................................ 7

3 EU Directives ................................................................................................. 8

4 Product description ...................................................................................... 9

5 Technical data ............................................................................................. 10

6 Details for ordering ..................................................................................... 12

7 Scope of delivery......................................................................................... 13

8 Dimensions .................................................................................................. 14

9 Device description Safety .......................................................................... 15

9.1 Connections .................................................................................................. 15

9.2 Control elements ........................................................................................... 16

9.3 Remote control .............................................................................................. 17

9.4 Power management ...................................................................................... 18

10 Mounting ...................................................................................................... 19

11 Setting the OSD screen .............................................................................. 20

11.1 Custom .......................................................................................................... 20

11.2 Image and sound........................................................................................... 21

11.3 Picture in Picture (PiP) .................................................................................. 23

11.4 Setup ............................................................................................................. 25

12 Troubleshooting .......................................................................................... 27

13 Disposal ....................................................................................................... 28

Contents

About this document

1 About this document

This document contains information on the operation of the product.

Orientation guide

[-> 3]

Cross-reference

Save

Button

<Ctrl>

Key

Tips and information

Contact

If you have questions or suggestions regarding the product or this documentation,

please contact our Technical Competence Center.

Internet: service.vanderbiltindustries.com

Vanderbilt provides training courses for all products.

Safety

2 Safety

2.1 Target group

Target groups

The information in this document is intended for the following target groups:

Commissioning personnel

 Configure the product at the

place of installation according to

customer-specific requirements.

 Check the product operability

and release the product for use

by the operator.

 Searches for and corrects

malfunctions.

 Has obtained suitable specialist training for the

function and for the products.

 Has attended the training courses for

commissioning personnel.

Operating personnel

 Performs the procedures for

proper operation of the

product.

 No particular qualification required.

 Has received instruction from the operational

startup personnel.

2.2 General safety precautions

 Read the general safety precautions before installing/configuring/operating the device.

 Keep this document for reference purposes.

 This document must always accompany the product.

 Please take into account any additional country-specific, local laws, safety standards or

regulations concerning installation, operation and disposal of the product.

Liability claim

 Do not connect the device to the 230 V supply network if it is damaged or any parts

are missing.

Danger of electrical shock when the device casing is open.

 Only qualified personnel should open the unit.

2.3 Transport

Damage during transport

 Keep the packaging material for future transportation.

 Do not expose the device to mechanical vibrations or shocks.

Safety

2.4 Installation

Radio interference with other devices in the environment / EMC

 This is a Class A device. This equipment may cause radio interference in a

residential installation. In this case the user is encouraged to perform

appropriate measures to correct the interference.

 For reasons of electromagnetic compatibility HDMI, DVI, S-Video, Audio, VGA,

Component and PC-Stereo cables must not exceed 3 meters in length.

Damage due to unsuitable mounting location

 The environmental conditions recommended by the manufacturer must be

observed. See section 'technical data'.

 Do not operate the device close to sources of powerful electromagnetic

radiation.

 Do not operate the device in dusty places.

 The device should only be used for indoor applications.

 Do not expose the device to mechanical vibrations or shocks.

 Protect the device against moisture.

 Place the unit on a stable surface that will support its weight.

Damage to the device due to lack of ventilation

 Do not block or cover the ventilation openings of the device. To ensure

sufficient ventilation please also read the instructions in the installation guide.

Danger of electrical shock/fire hazard/damage to the device due to

incorrect connection

 Connect the device only to power sources with the specified voltage. Voltage

supply requirements can be found on the rating label of the device.

Danger of electrical shock due to unsuitable power source

 Use only the plug-in power supply unit that is included in the delivery.

2.5 Operation

Danger of explosion or burn hazard if the battery is improperly installed

 When inserting new batteries make sure the battery poles are correctly

positioned.

 Do not expose the battery to fire or high temperatures.

 Discard used batteries according to local regulations.

Safety

2.6 Service and maintenance

Danger of electrical shock during maintenance

 Do not attempt to service or modify this device yourself. Refer this work to

qualified service personnel.

Danger of electrical shock while cleaning the device

 Do not use liquid cleaners or sprays that contain alcohol, spirit or ammonia.

EU Directives

3 EU Directives

This product complies with the requirements of the following European directives.

The EU declaration of conformity is available to the responsible agencies at:

Vanderbilt

Clonshaugh Business and Technology Park

Clonshaugh

Dublin 17

Ireland

www.vanderbiltindustries.com

Compliance with the European Directive 2004/108/EC has been proven by testing

according to the following standards:

Emitted interference:

EN 61000-3-2

EN 61000-3-3

EN 55022 Kl. A

Interference resistance:

EN 50130-4

European Directive 2006/95/EEC “Low-Voltage Directive”

Compliance with the European Directive 2006/95/EEC has been proven by testing

according to the following standards:

Safety:

EN 60950-1

Product description

4 Product description

The CMTC2315 is part of the new wide screen monitor range of Vanderbilt. The

high-resolution TFT monitor has been specifically designed for CCTV applications

and is ideally suited for use with digital video recorders (DVR) and PC applications.

Its very high contrast ratio and brightness combined with a viewing angle of 160˚

H/V provides a clear and comfortable view.

The PiP/PbP function (Picture-in-Picture/Picture-by-Picture) extends the monitor to

a real security monitor.

The monitor has two BNC video inputs with loop-through outputs, one DVI and one

HDMI input for DVR- and PC-based applications. In addition, it is equipped with 2

audio inputs and outputs and built-in speakers.

A graphical OSD menu in 5 languages and a remote control make the monitor

particularly user-friendly. The control buttons on the monitor can be password-

protected so that tampering with the settings by unauthorized persons is prevented.

Technical data

5 Technical data

Panel type

58 cm (23”) TFT colour LED panel

Viewable size (H x V)

509.76 x 286.74 mm

Pixel pitch (H x V)

0.2655 x 0.2655 mm

Viewing angle (H / V)

160° / 160°

Contrast ratio

1000:1

Brightness

250 cd/㎡

Resolution (H x V)

1920 x 1080 pixels

Colours

16.7M

Response time

5 ms

Power requirement (power supply)

100 – 240V~

Power requirement (monitor)

12 2.3A

Power consumption

28W

Scanning frequency

31 – 80 kHz (H); 56 – 75 Hz (V)

Inputs

- Resolution: FHD (1920 x 1080 at 60 Hz)

- Connection: VGA, DVI-D, HDMI

VIDEO

- Standard: PAL/NTSC (auto-sensing)

- Connection: 2 x BNC (Composite Video),

- Level: 1.0 Veff., 75 Ohm terminated

AUDIO

- 1 x audio input (chinch, R+L) for AV1, AV2

- 1 x PC stereo audio input

Trigger

- 1 trigger input

Outputs

VIDEO

- 2 video outputs (BNC, looped through)

AUDIO

- Integrated loudspeakers: 2x1 W stereo

OSD languages

English, French, German, Italian, Spanish,

Portuguese, Dutch

Dimensions (W x H x D)

548 x 410 x 182 mm (with base)

548 x 330 x 55 mm (without base)

Package dimensions (W x H x D)

600 x 460 x 160 mm

Material

ABS plastic

Weight

Net weight: 4,4 kg

Gross weight: 6,6 kg

Environmental operating temperature

0 – 40 °C

Technical data

Storage temperature

-20 to +60 °C

Relative humidity

Max. 80%, non-condensing

Wall mount

VESA 100

Approved battery type

AAA / 1.5 V

Approval

Details for ordering

6 Details for ordering

Type

Order number

Designation

Weight (total)

CMTC2315

V54573-C24-A1

58 cm LED CCTV Monitor 16:9

6,6 kg

Scope of delivery

7 Scope of delivery

 TFT LED monitor

 External power supply unit

 Power cable

 DVI cable

 HDMI cable

 VGA cable

 Audio stereo cable

 Remote control (incl. batteries)

 Operation manual

Dimensions

8 Dimensions

All dimensions in mm.

Device description Safety

9 Device description Safety

9.1 Connections

Video 2 (AV2) output

PC Stereo input

Video 2 (AV2) input

VGA (D-SUB) input

Video 1 (AV1) output

DVI-D input

Video 1 (AV1) input

HDMI input

Trigger input

12 V DC power supply

6, 7

Audio input (R+L) for AV1, AV2

D-SUB connector pin assignments

Pin 1

Red video

Pin 9

Pin 2

Green video

Pin 10

Signal cable detect

Pin 3

Blue video

Pin 11

Update

Pin 4

Update

Pin 12

SDA (for DDC)

Pin 5

Ground

Pin 13

H-SYNC (or H/V SYNC)

Pin 6

Red ground

Pin 14

V-SYNC

Pin 7

Green ground

Pin 15

SCL (for DDC)

Pin 8

Blue ground

Device description Safety

9.2 Control elements

SOURCE/

Selects input source (AV1/AV2/HDMI/DVI/PC)

In OSD menu: Enters sub menu

Enters and exits the OSD menu

In OSD menu: Exits sub menu

3, 4

AUTO/ ▼/▲

In OSD menu: Moves downward/upward in the menu

The Up button is a hold function and stops the Trigger & Auto

switching functions

5, 6

VOL ◄/►

Adjusts the volume

In OSD menu: Adjusts menu settings

/ I

Turns the power on or off

Power LED

Indicates the monitor power status

(Blue = Power is turned on; Red = Power is turned off)

IR sensor

Remote control sensor

Device description Safety

9.3 Remote control

POWER: Switches the device ON or OFF

SOURCE: Selects the input source (video sources)

AUTO: Automatic geometry adjustment (only in PC mode)

HOLD: Stops the "Trigger" and "Auto Switching" functions

MUTE : Switches the sound off

MENU: Activates and closes the OSD menu

EXIT: Closes the OSD menu

VOL ◄►: Adjusts the volume

UP/DOWN: Moves up/down in the OSD menu

SOURCE/SELECT: Confirms a selection or indicates the

current operating mode

INFO: Shows information about input source and image mode

STILL: Holds the image

PIP (Picture in Picture): Activates Picture-in-Picture mode

P.INPUT: Switches the input source of the sub-image in PiP

mode

P.POS: Changes the position of the sub-image in PiP mode

P.SIZE: Changes the size of the main and the sub-image in

PiP mode

SWAP: Alternates between main image and sub-image

ARC (Aspect Ratio Control): Selects the aspect ratio

APC (Auto Picture Control): Selects the image mode

ACC (Auto Colour Control): Selects the colour mode

S.SET: Selects the sound mode in the main or sub-image

PC: Selects the PC mode (PC/DVI/HDMI)

AV: Selects the AV mode (AV1/AV2/S-VIDEO)

COMP: Selects the COMPONENT mode COMP

Device description Safety

9.4 Power management

This monitor is equipped with a power management system to reduce the current

consumption after receiving a signal from a VESA DPMS-compatible video card.

The DPMS-compliant video card performs this signaling by not sending a

horizontal, vertical, or a sync signal.

Display Power Management Signaling (DPMS) is a VESA interface standard

which lowers the power consumption of computer monitors when not in use.

The monitor enters the appropriate operating mode through identifying each of the

three modes of the signaling system.

Power consumption

Mode

Power consumption

< 28W

OFF

< 0.5W

LED indicator

The power management function of the monitor includes the following statuses:

Mode

LED colour

Monitor operation

Blue

Normal mode

OFF

Red

No operation

Mounting

10 Mounting

Wall mounting

The LCD monitor is suitable for wall mounting using a mounting fixture according to

VESA 100 Standard (not included in the delivery).

100

※Attention!

You must use four M4x10 screws to assemble this monitor and the wall mount

bracket.

※ Warning!

If user use longer than M4x10mm, it may cause the damage on the unit.

Please follow instructed bolt size & length.

Setting the OSD screen

11 Setting the OSD screen

All image and sound settings for the monitor can be made in the OSD menu (On

Screen Display).

How to make the settings for the OSD screen:

1. Press the Menu key to select the OSD menu.

2. Select the desired option with the ▲/▼ buttons.

 The selected option is highlighted.

3. Press the ▶ key to select the submenu for the settings.

4. Change the desired value with the ▲/▼ keys.

5. Press the ◀ key to exit the submenu again.

6. Press the Menu key to exit the OSD menu.

 The OSD menu then disappears.

 All settings are saved automatically.

NOTICE

The OSD menu disappears automatically after no settings are made after a

certain time.

11.1 Custom

"Custom" menu in video mode; "Custom" menu in RGB-PC or HDMI mode

Option

Function

Values

Brightness

Adjusts the screen brightness

0 – 100

Page is loading ...

Vanderbilt CMTC2315 User manual

Brand: Vanderbilt

Model: CMTC2315

Category: TVs & monitors

Type: User manual

Download PDF

report

Vanderbilt CMTC2315 User manual

Vanderbilt CMTC2315 User manual

Related papers

Other documents