BRVISION BR-TQS7002-DVR User manual

Brand: BRVISION

Model: BR-TQS7002-DVR

Category: Digital Video Recorders (DVR)

Type: User manual

User Manual

For BR-TQS7002-DVR

www. brvision.com

CONTENTS

1.Product profile

1-1.Introduction

1-2.Function

1-3.Composition

1-3-1.Installation

1-3-2.Wiring

2. AV function operating instructions

2-1.Power display

2-2.Interface switching

2-3.Backup trigger and image

2-4.D/N switch

2-5.Video system

2-6.M/N switch

3. Operating Instruction on Recording

3-1.DVR Interface Profile

3-2.SD Card Compatible

3-3.Recording Operating

3-4.Photo Mode

3-5.Video Playback and Photo Browsing

3-6.Copy File to The Computer

3-7 Buttons locking function operation

4. Remote Controller Operating Instruction

4-1.Function Description

4-2.The function of video menu

4-3.AV function

4-4.AV interface and video interface function switch

4-5 Fast forward,fast rewind and replay

5. Technical Parameters

5-1.main performance index

5-2. Video Format

1.Product profile

1-1.Introduction

Thank for you purchasing our DVR surveillance recording system(Hereinafter as

recording system).The recording system is composed of a four camera capable

monitor with image processing, recorded image processing and remote control,

camera and cables.

The system is used for backup surveillance and recording images. The user can set

different demands, select one channel or more channel recording at the same time.

Easy installation and intuitive imaging.

1-2.Function

●Easy installation and stable performance.

●Image display directly and monitor outside environment.

●Backup surveillance and recording.

●Large capacity.

●Continuous event and accident management.

1-3.Composition

Monitor Bracket DVR Power Cable

Camera Remote Control SD Card

(not including in the standard kit)

20M Extension Cable

1-3-1.Installation

1-3-2.Wiring

2.AV function operating instructions

2-1.Power display

Connect the recording system and the device. Supply 12V-24V DC power.press

"power" button to start. (keep the device on then disconnect power directly,it will auto

detect the memory function next time )

2-2.Interface switching

Switch to AV interface (please refer to:4-4.AV interface and video interface function

switch), press the "CAM" button on the panel, you can switch into AV1/AV4 interface,

keep press the "CAM" button to switch the interface (as shown in Fig. 1 & 2). You

can also press the “CH1/CH4” or ” ” button on the remote control to switch to the

target interface.

2-3.Backup trigger and image

When the recording system is under condition of power on or off, randomly select

trigger AV1 to AV4 connect to positive pole,the monitor will auto switch to the correct

image.

2-4.D/N switch

Touch“D/N”button 5 seconds to switch. Press for 5 seconds again to auto switch to

current pattern.

2-5.Video system

Caters for PAL and NTSC system. It has auto switching capability.

2-6.M/N switch

Short press "menu" button then switch to "function" option. Press "M/N" select the

setting. Press "up" or "down" button to increase or decrease. Long press "menu" to

exit or wait 8 seconds to auto save exit.

3. Operating Instruction on Burning Functionality

3-1.DVR Interface Profile

1. DVR Interface

2. The current interface channel

3. Date

4. Time

5. Recording time

6. Display interface

7. Record in the flashing

3-2.SD Card Compatible

Recording system can be compatible with 4 g ~ 64 g SD card, can also be

compatible

with the TF card, but need to have a TF card into SD card.

3-3.Recording Operation

Insert the SD card( please refer to installation drawing 1-3-2). After start up, the

system will automatically enter into the recording status without any operation.

Recording system will automatically copy the currently displayed image and users

only need to choose 1 to 4 video channel and eight different mode ( As follows).

NOTE: Recording system can also automatically copy the current video image

without entering the DVR interface.

3-4.Photo Mode

Under the DVR interface state, press the "MODE" button on the remote control, a

pop-up window as shown in Fig. 3. Press the remote control " " button to complete

picture.

3-5.Video Playback and Photo Browsing

Switch to the DVR model state by pressing " " button on the remote control.

Press "MODE" to enter into the picture mode. Switch to the preview screen of all files

by pressing "MODE" button again( see chart 1).Press button or the recorders on the

front panel "UP" and "DOWN" button to check the photos and video files, and press

the “ ” button to play the needed video files( see chart 2). Playback completed,

press "MODE" button to exit the video play, play the " " button to return to the state

of recording.

3-6.Copy File to The Computer

Remove the sun shade (please refer to the the product installation figure

1-3-2 ).Gently downward press the SD card in the top right corner to eject, remove

the SD card when the SD card pop-up. Set the SD card into the computer, find "my

computer" on the computer desktop to double-click to open, find the "removable disk"

double-click to enter, find "DCIM" folder, double-click to open the "DCIM" into the

DCIM folder, double-click the start "100 dscim" file, the 100 dscim folder will contain

the video files and photos.

3-7 Buttons locking function operation

In the state of power-on, press both the button "CAM" and "M/N" at the same time fo

r 5 seconds, the screen reads “DEACTIVATION OF BUTTONS”. Then

press both the button "CAM" and "M/N" at the same time for 5 more seconds, the sc

reen will read “ACTIVATION”.

4.Remote Controller Operating Instruction

4-1.Function Description

1. Power

2. AV/DVR

3. Photo interface, preview photos

and video playback switch button

4. Recording interface menu

5. Up

6. Mute

7. Left

8. Confirm

9. Right

10. AVL interface function menu switch

button

11. Down

12. DVR interface display mode switch

button

13. Switch to AV1 channel mode

14. Volume up

15. Switch to AV2 channel mode

16. Switch to AV3 channel mode

17. Volume down

18. Switch to AV4 channel mode

4-2.The function of video menu

Press the "MODE" button into the photo or image preview mode. Then press

"SETUP" button, pop-up video output settings menu, press it again to the next menu

interface, shown in Fig. 4 & 5 as follows. Press "UP " or "DOWN " button

options, press the “ ” button confirmation to confirm after setting.

4-3.AV function

Short press the"menu" button then switch to the menu interface (or setting through

the remote controller).

Keep press the "menu" button to select the setting item, short press the "M/N" button

to select the setting. Short press "up" or "down" button to increase or decrease. After

setting, keep press the "menu" to exit or wait 8 seconds to auto save exit.

4-4.AV interface and video interface function switch

Press the "AV/DVR " button on the remote control (or press "CAM" button on the

panel for 5 seconds), you can switch to the AV or DVR interface ( as shown in Fig. 6

& 7)

4-5 Fast forward,fast rewind and replay

Into the state of video playback (details please refer to 3-5. Video playback and photo

browsing), press "SETUP" button on the remote control, the wording "1 x" FW in left

upper corner of the screen is currently normal play. Press the "SETUP" button again,

prompt "FW 2 x" multiples, 4 multiples, 8 multiples in the loop. Press "UP " button

on the remote control to play back video.Press "DOWN " button to continue or "UP"

playback video. Press "DOWN" to continue to play the video.

5.Technical Parameters

5-1.main performance index

5-2. Video Format

BRVISION BR-TQS7002-DVR User manual

Brand: BRVISION

Model: BR-TQS7002-DVR

Category: Digital Video Recorders (DVR)

Type: User manual

Download PDF

report

BRVISION BR-TQS7002-DVR User manual

BRVISION BR-TQS7002-DVR User manual

Other documents