Aztech DSL1015EW S User manual

DSL1015EW(S)

4-Port ADSL2/2+ Wireless-G

Modem Router

User Manual

Page 2

of 28

No part of this document may be reproduced, republished, or retransmitted in any form or by any means

whatsoever, whether electronically or mechanically, including, but not limited to, by way of photocopying,

recording, information recording, or through retrieval systems without the express written permission. We

reserve the right to revise this document at any time without the obligation to notify any person and/or

entity. All other company or product names mentioned are used for identification purposes only and may

be trademarks of their respective owners.

LIMITATION OF LIABILITY AND DAMAGES

THE PRODUCT AND THE SOFTWARES WITHIN ARE PROVIDED "AS IS," BASIS. THE MANUFACTURER AND

MANUFACTURER’S RESELLERS (COLLECTIVELY REFERRED TO AS “THE SELLERS”) DISCLAIM ALL WARRANTIES,

EXPRESS, IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF NON-

INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR ANY WARRANTIES ARISING

FROM COURSE OF DEALING, COURSE OF PERFORMANCE, OR USAGE OF TRADE. IN NO EVENT WILL THE SELLERS

BE LIABLE FOR DAMAGES OR LOSS, INCLUDING BUT NOT LIMITED TO DIRECT, INDIRECT, SPECIAL WILLFUL,

PUNITIVE, INCIDENTAL, EXEMPLARY, OR CONSEQUENTIAL, DAMAGES, DAMAGES FOR LOSS OF BUSINESS

PROFITS, OR DAMAGES FOR LOSS OF BUSINESS OF ANY CUSTOMER OR ANY THIRD PARTY ARISING OUT OF THE

USE OR THE INABILITY TO USE THE PRODUCT OR THE SOFTWARES, INCLUDING BUT NOT LIMITED TO THOSE

RESULTING FROM DEFECTS IN THE PRODUCT OR SOFTWARE OR DOCUMENTATION, OR LOSS OR INACCURACY OF

DATA OF ANY KIND, WHETHER BASED ON CONTRACT, TORT OR ANY OTHER LEGAL THEORY, EVEN IF THE PARTIES

HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE ENTIRE RISK AS TO THE RESULTS AND

PERFORMANCE OF THE PRODUCT OR ITS SOFTWARE IS ASSUMED BY CUSTOMER. BECAUSE SOME STATES DO NOT

ALLOW THE EXCLUSION OR LIMITATION OF LIABLITY FOR DAMAGES, THE ABOVE LIMITATION MAY NOT APPLY TO

THE PARTIES. IN NO EVENT WILL THE SELLERS’ TOTAL CUMULATIVE LIABILITY OF EACH AND EVERY KIND IN

RELATION TO THE PRODUCT OR ITS SOFTWARE EXCEED THE AMOUNT PAID BY CUSTOMER FOR THE PRODUCT.

User Manual

Page 3

of 28

Contents

About the Router ........................................................................................................ 4

Requirements .............................................................................................. 5

Package Contents ........................................................................................ 5

Device Design .............................................................................................. 6

Front Panel ................................................................................................................ 6

Back Panel ................................................................................................................. 7

Getting Started ........................................................................................................... 8

Planning Your Network ............................................................................... 9

Remove or Disable Conflicts ...................................................................... 10

Internet Sharing, Proxy, and Security Applications............................................... 10

Configuring TCP/IP Settings ................................................................................... 11

Configuring Internet Properties ............................................................................. 11

Removing Temporary Internet Files ...................................................................... 12

Setup the Device ....................................................................................... 13

Connecting to the Internet ........................................................................ 14

Connecting Via Quick Setup.................................................................................... 14

About the Web User Interface .................................................................................. 16

Accessing the Web User Interface ............................................................. 16

Menus ........................................................................................................ 16

Quick Setup ............................................................................................................. 17

Home Network Configuration ................................................................................ 18

Device Status .......................................................................................................... 20

Statistics .................................................................................................................. 21

Firewall Configuration ............................................................................................ 22

Device Administration ............................................................................................ 25

User Manual

Page 4

of 28

About the Router

The DSL1015EW(S) is an ADSL integrated access device, which supports ADSL2/2+,

internal Wireless 802.11b/g, 4-Port fast Ethernet switch, and USB Host for sharing

through network.

Targeted at providing good quality and high definition IPTV services to end users,

DSL1015EW(S) Residential Gateway is an intelligent 4 port 10/100 AutoMDI/MDIx

Managed Switch. Security is provided via a double SPI (Stateful Packet Inspection) and

Full Cone NAT support firewall. Hardware accelerated AES/WEP/WPA/WPA2 based

encryption/MAC Address Filtering for Wireless links. Multiple sessions VPN Pass-through

and DMZ support provide additional security support for telecommuters as well as allow

flexibility while maintaining security against malicious hackers. Choices of Dynamic DNS

server give users the flexibility of hosting a web or an FTP server with various domain

names.

DSL1015EW(S) could function as a Broadband Home Router. It supports multiple-VLAN

management for delivering dual-play services. With Universal Plug and Play support,

home networking becomes a breeze for everyone in the family. Multi Port

Range/Popular Application Forwarding makes it even easier to select which application

you want your network to allow while ensuring your security at the same time.

User Manual

Page 5

of 28

Requirements

Your computer must meet the following minimum requirements.

 Any operating system can be used

 Web Browser

 CDROM drive

 233MHz processor

 Ethernet network adapter

 An active DSL Internet account

Package Contents

Package contents are listed below. For any missing items, please contact your dealer

immediately. Product contents vary for different models.

 Router

 Ethernet cable

 Telephone cable

 POTS Splitter (Optional)

 12V 1.5A DC Power Adapter

 Easy Start Guide

 Resource CD

User Manual

Page 6

of 28

Device Design

Front Panel

Label

LabelLabel

Label

Action

ActionAction

Action

Description

DescriptionDescription

Description

1

11

1

POW

POWPOW

POWER

ERER

ER

Off No power is supplied to the device

Steady green light Connected to an AC power supply

Steady red light Error on the device

2

22

2

ETHERNET LAN

ETHERNET LANETHERNET LAN

ETHERNET LAN

Off No Ethernet connection

Steady green light Connected to an Ethernet port

Blinking green light Transmitting/Receiving data

3

33

3

USB Host

USB HostUSB Host

USB Host

OFF No USB device connected

Steady green light USB device connected

Blinking green light Transmitting/Receiving data

4

44

4

WIRELESS

WIRELESSWIRELESS

WIRELESS

OFF Wireless interface disabled

Steady green light Wireless Interface enabled

Blinking green light Transmitting/Receiving data

5

55

5

BROADBAND

BROADBANDBROADBAND

BROADBAND

Blinking green light (slow) No DSL signal

Blinking green light (fast) Establishing DSL signal

Steady green light DSL signal is established

6

66

6

INTERNET

INTERNETINTERNET

INTERNET

Off No connection to the Internet

Steady green light Internet connection established

Blinking green light Transmitting/Receiving data

Steady red light PPP authentication failed

User Manual

Page 7

of 28

Back Panel

Label

LabelLabel

Label

Description

DescriptionDescription

Description

7

77

7

BROADBAND

BROADBANDBROADBAND

BROADBAND

Connecting the modem to an ADSL line

8

88

8

ETHE

ETHEETHE

ETHERNET 1

RNET 1 RNET 1

RNET 1 -

--

-

4

44

4

Connecting computers and other Ethernet devices

9

99

9

POWER

POWERPOWER

POWER

AC Adapter input

10

1010

10

USB

USBUSB

USB

For USB devices such as printers and USB external hard drives

11

1111

11

RESET

RESETRESET

RESET

To reset the modem to the factory default configuration

User Manual

Page 8

of 28

Getting Started

Setting up the device is easy. The flowchart below provides an outline of the steps

needed to complete the installation. Brief descriptions appear beside each step. Detailed

instructions are provided in the subsequent pages.

Remove/Disable

Conflicts

Plan your Network

Ready to Use

Setup the Router

Connect to the

Internet

Web Interface

Use Quick Setup

You may need to check some

setting or disable some application

before installation.

Connect the telephone cables,

Ethernet cables, and power adaptor.

Use the Quick Start Web GUI to setup

your PPPoE connection.

User Manual

Page 9

of 28

Planning Your Network

Before moving ahead to setup your network, it is a good idea to draw out a network

diagram to help identify your network devices and plan out how to connect these

devices. The illustration below is an example of a network diagram.

Each port in the router can be used for different connections. For example:

• USB 1 – USB printer

• Ethernet 1 – IPTV Set Top Box

• Ethernet 2 – Game Console

• Ethernet 3 – Mom’s Computer

• Ethernet 4 – Dad’s Computer (PC1)

To create a network diagram:

To create a network diagram:To create a network diagram:

To create a network diagram:

• For wireless devices, identify the wireless devices you want to include in the

network

• For wired devices, identify which router port you want to use for each device.

User Manual

Page 10

of 28

Remove or Disable Conflicts

To make sure the router installation moves on smoothly, you need to remove or disable

conflicts that may interfere the installation. Probable conflicts may include:

 Internet sharing applications

 Proxy software

 Security software

 TCP/IP settings

 Internet properties

 Temporary Internet files

Internet Sharing, Proxy, and Security Applications

Internet sharing, proxy software, and firewall applications may interfere with the router

installation. These should be removed or disabled before start the installation.

If you have any of the following or similar applications installed on your computer,

remove or disable them according to the manufacturer’s instructions.

Internet Sharing Applications

Internet Sharing ApplicationsInternet Sharing Applications

Internet Sharing Applications

Proxy Software

Proxy SoftwareProxy Software

Proxy Software

Security Software

Security SoftwareSecurity Software

Security Software

Microsoft Internet Sharing WinGate Symantec

WinProxy Zone Alarm

User Manual

Page 11

of 28

Configuring TCP/IP Settings

Check if your computer uses the default TCP/IP settings.

To check the TCP/IP properties:

1. Select Start > Run. This opens the Run dialog box.

2. Enter control ncpa.cpl and then click OK. This opens the Network Connections in

your computer.

3. Right-click LAN and then select Properties. This opens the Local Area Connection

Properties dialog box.

4. Select Internet Protocol (TCP/IP) and then click Properties. This opens the Internet

Protocol (TCP/IP) dialog box.

5. Select Obtain an IP address automatically.

6. Click OK to close the Internet Protocol (TCP/IP) dialog box.

7. Click OK to close the Local Area Connection Properties dialog box.

Configuring Internet Properties

To set the Internet Properties:

1. Select Start > Run. This opens the Run dialog box.

2. Enter control inetcpl.cpl and then click OK. This opens Internet Properties.

3. Click Connections tab.

4. In the Dial-up and Virtual Private Network settings pane, select Never dial a

connection.

5. Click OK to close Internet Properties.

User Manual

Page 12

of 28

Removing Temporary Internet Files

Temporary Internet files are files from Web sites that are stored in your computer. Delete

these files to clean the cache and remove footprints left by the Web pages you visited.

To remove temporary Internet files:

1. Select Start > Run. This opens the Run dialog box.

2. Enter control and then click OK. This opens Control Panel.

3. Double-click Internet Options. This opens Internet Options.

4. In the Temporary Internet Files pane, click Delete Cookies.

5. Click Delete Files.

6. Click OK to close Internet Properties.

User Manual

Page 13

of 28

Setup the Device

When installing the router, find an area where there are enough electrical outlets for the

router, the main computer, and your other computer devices.

To setup the router:

1. Plug one end of the Ethernet cable from the router’s ETHERNET

ETHERNET ETHERNET

ETHERNET port and then plug

the other end into the Ethernet port in your computer.

2. If you have another device you need to connect through wire into the router, use

another piece of Ethernet cable. Plug one end of the Ethernet cable from the

computer’s Ethernet port and then plug the other end into an available Ethernet

port in the router.

3. Plug one end of the telephone cable from the POTS Splitter’s ADSL

ADSL ADSL

ADSL port and then

plug the other end into the router’s DSL

DSL DSL

DSL port.

POTS Splitter

POTS SplitterPOTS Splitter

POTS Splitter

Your phone line carries with it both phone calls and Internet signals. When you are

using the Internet, the connection produces high-pitched tones that can affect your

voice calls when using the phone. Installing a Plain Old Telephone Service (POTS)

splitter separates the two signals and eliminates the noise.

To setup a telephone on the POTS Splitter:

To setup a telephone on the POTS Splitter:To setup a telephone on the POTS Splitter:

To setup a telephone on the POTS Splitter:

a. Locate the phone jack in your house.

b. Insert the POTS Splitter into the phone jack.

c. Plug one end of the telephone cable from the POTS Splitter’s TEL

TELTEL

TEL port and then plug

the other end into the telephone.

4. Connect the power adapter from the router’s 12V 1.5A DC

port into the electrical

outlet.

5. Press ON.

User Manual

Page 14

of 28

Connecting to the Internet

You can use the Web Interface to setup your Internet connection.

Connecting Via Quick Setup

To connect to the Internet via the User mode GUI:

1. Open your browser

2. Type 192.168.1.254 on the address bar

3. Enter the connection settings

a. Select a Connection Type

b. Select an Encapsulation Mode

c. Enter the PPP Username and Password

4. Click Connect

5. Restart the web browser and you are ready to surf the Internet

User Manual

Page 15

of 28

To connect to the Internet via the Web Interface Setup Wizard:

1. Open your browser and the router will redirect you to the Setup Wizard screen

2. Click on SET UP NOW

3. Type in the username and password supplied by your ISP

4. Click Connect

5. Restart the web browser and you are ready to surf the Internet

User Manual

Page 16

of 28

About the Web User Interface

The Web User Interface is used to configure the basic router settings.

Accessing the Web User Interface

To access the Web User Interface:

1. Open your browser.

2. Type-in 192.168.1.254 on the address bar and then press Enter.

Menus

The Web User Interface includes the following menus:

 Quick Setup

 Home Network Configuration

 Device Status

 Statistics

 Firewall Configuration

 Device Administration

User Manual

Page 17

of 28

Quick Setup

Quick Setup includes Device Info to check basic information on your device and Internet

Login Setup that allows you to control the PPP login account settings.

User Manual

Page 18

of 28

Home Network Configuration

Local Area Network (LAN) Setup

Local Area Network (LAN) SetupLocal Area Network (LAN) Setup

Local Area Network (LAN) Setup

Configure the DSL Router IP Address and Subnet Mask for LAN interface. You may also

configure the DHCP server and Public IP Pass Through settings of your router.

User Manual

Page 19

of 28

DCHP Lease Information

DCHP Lease InformationDCHP Lease Information

DCHP Lease Information

Displays information on the DHCP clients connected to the router.

Broadband Status Notification

Broadband Status NotificationBroadband Status Notification

Broadband Status Notification

If enabled, the router will show push-pages on your web browser to give you

information regarding common broadband connection issues. This will give you an idea

of what is the cause of your Internet connection problem.

User Manual

Page 20

of 28

Device Status

Displays the router information as well as status of different connections such as DSL,

Internet and IPTV.

Page is loading ...

Aztech DSL1015EW S User manual

This manual is also suitable for

Aztech DSL1015EW S User manual

Related papers

Other documents