DSL1015EW(S)
4-Port ADSL2/2+ Wireless-G
Modem Router
User Manual
Page 2
of 28
© Copyright 2011 All rights reserved.
No part of this document may be reproduced, republished, or retransmitted in any form or by any means
whatsoever, whether electronically or mechanically, including, but not limited to, by way of photocopying,
recording, information recording, or through retrieval systems without the express written permission. We
reserve the right to revise this document at any time without the obligation to notify any person and/or
entity. All other company or product names mentioned are used for identification purposes only and may
be trademarks of their respective owners.
LIMITATION OF LIABILITY AND DAMAGES
THE PRODUCT AND THE SOFTWARES WITHIN ARE PROVIDED "AS IS," BASIS. THE MANUFACTURER AND
MANUFACTURER’S RESELLERS (COLLECTIVELY REFERRED TO AS “THE SELLERS”) DISCLAIM ALL WARRANTIES,
EXPRESS, IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF NON-
INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR ANY WARRANTIES ARISING
FROM COURSE OF DEALING, COURSE OF PERFORMANCE, OR USAGE OF TRADE. IN NO EVENT WILL THE SELLERS
BE LIABLE FOR DAMAGES OR LOSS, INCLUDING BUT NOT LIMITED TO DIRECT, INDIRECT, SPECIAL WILLFUL,
PUNITIVE, INCIDENTAL, EXEMPLARY, OR CONSEQUENTIAL, DAMAGES, DAMAGES FOR LOSS OF BUSINESS
PROFITS, OR DAMAGES FOR LOSS OF BUSINESS OF ANY CUSTOMER OR ANY THIRD PARTY ARISING OUT OF THE
USE OR THE INABILITY TO USE THE PRODUCT OR THE SOFTWARES, INCLUDING BUT NOT LIMITED TO THOSE
RESULTING FROM DEFECTS IN THE PRODUCT OR SOFTWARE OR DOCUMENTATION, OR LOSS OR INACCURACY OF
DATA OF ANY KIND, WHETHER BASED ON CONTRACT, TORT OR ANY OTHER LEGAL THEORY, EVEN IF THE PARTIES
HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE ENTIRE RISK AS TO THE RESULTS AND
PERFORMANCE OF THE PRODUCT OR ITS SOFTWARE IS ASSUMED BY CUSTOMER. BECAUSE SOME STATES DO NOT
ALLOW THE EXCLUSION OR LIMITATION OF LIABLITY FOR DAMAGES, THE ABOVE LIMITATION MAY NOT APPLY TO
THE PARTIES. IN NO EVENT WILL THE SELLERS’ TOTAL CUMULATIVE LIABILITY OF EACH AND EVERY KIND IN
RELATION TO THE PRODUCT OR ITS SOFTWARE EXCEED THE AMOUNT PAID BY CUSTOMER FOR THE PRODUCT.
User Manual
Page 3
of 28
Contents
About the Router ........................................................................................................ 4
Requirements .............................................................................................. 5
Package Contents ........................................................................................ 5
Device Design .............................................................................................. 6
Front Panel ................................................................................................................ 6
Back Panel ................................................................................................................. 7
Getting Started ........................................................................................................... 8
Planning Your Network ............................................................................... 9
Remove or Disable Conflicts ...................................................................... 10
Internet Sharing, Proxy, and Security Applications............................................... 10
Configuring TCP/IP Settings ................................................................................... 11
Configuring Internet Properties ............................................................................. 11
Removing Temporary Internet Files ...................................................................... 12
Setup the Device ....................................................................................... 13
Connecting to the Internet ........................................................................ 14
Connecting Via Quick Setup.................................................................................... 14
About the Web User Interface .................................................................................. 16
Accessing the Web User Interface ............................................................. 16
Menus ........................................................................................................ 16
Quick Setup ............................................................................................................. 17
Home Network Configuration ................................................................................ 18
Device Status .......................................................................................................... 20
Statistics .................................................................................................................. 21
Firewall Configuration ............................................................................................ 22
Device Administration ............................................................................................ 25
User Manual
Page 4
of 28
About the Router
The DSL1015EW(S) is an ADSL integrated access device, which supports ADSL2/2+,
internal Wireless 802.11b/g, 4-Port fast Ethernet switch, and USB Host for sharing
through network.
Targeted at providing good quality and high definition IPTV services to end users,
DSL1015EW(S) Residential Gateway is an intelligent 4 port 10/100 AutoMDI/MDIx
Managed Switch. Security is provided via a double SPI (Stateful Packet Inspection) and
Full Cone NAT support firewall. Hardware accelerated AES/WEP/WPA/WPA2 based
encryption/MAC Address Filtering for Wireless links. Multiple sessions VPN Pass-through
and DMZ support provide additional security support for telecommuters as well as allow
flexibility while maintaining security against malicious hackers. Choices of Dynamic DNS
server give users the flexibility of hosting a web or an FTP server with various domain
names.
DSL1015EW(S) could function as a Broadband Home Router. It supports multiple-VLAN
management for delivering dual-play services. With Universal Plug and Play support,
home networking becomes a breeze for everyone in the family. Multi Port
Range/Popular Application Forwarding makes it even easier to select which application
you want your network to allow while ensuring your security at the same time.
User Manual
Page 5
of 28
Requirements
Your computer must meet the following minimum requirements.
Any operating system can be used
Web Browser
CDROM drive
233MHz processor
Ethernet network adapter
An active DSL Internet account
Package Contents
Package contents are listed below. For any missing items, please contact your dealer
immediately. Product contents vary for different models.
Router
Ethernet cable
Telephone cable
POTS Splitter (Optional)
12V 1.5A DC Power Adapter
Easy Start Guide
Resource CD
User Manual
Page 6
of 28
Device Design
Front Panel
Label
LabelLabel
Label
Action
ActionAction
Action
Description
DescriptionDescription
Description
1
11
1
POW
POWPOW
POWER
ERER
ER
Off No power is supplied to the device
Steady green light Connected to an AC power supply
Steady red light Error on the device
2
22
2
ETHERNET LAN
ETHERNET LANETHERNET LAN
ETHERNET LAN
Off No Ethernet connection
Steady green light Connected to an Ethernet port
Blinking green light Transmitting/Receiving data
3
33
3
USB Host
USB HostUSB Host
USB Host
OFF No USB device connected
Steady green light USB device connected
Blinking green light Transmitting/Receiving data
4
44
4
WIRELESS
WIRELESSWIRELESS
WIRELESS
OFF Wireless interface disabled
Steady green light Wireless Interface enabled
Blinking green light Transmitting/Receiving data
5
55
5
BROADBAND
BROADBANDBROADBAND
BROADBAND
Blinking green light (slow) No DSL signal
Blinking green light (fast) Establishing DSL signal
Steady green light DSL signal is established
6
66
6
INTERNET
INTERNETINTERNET
INTERNET
Off No connection to the Internet
Steady green light Internet connection established
Blinking green light Transmitting/Receiving data
Steady red light PPP authentication failed
User Manual
Page 7
of 28
Back Panel
Label
LabelLabel
Label
Description
DescriptionDescription
Description
7
77
7
BROADBAND
BROADBANDBROADBAND
BROADBAND
Connecting the modem to an ADSL line
8
88
8
ETHE
ETHEETHE
ETHERNET 1
RNET 1 RNET 1
RNET 1 -
--
-
4
44
4
Connecting computers and other Ethernet devices
9
99
9
POWER
POWERPOWER
POWER
AC Adapter input
10
1010
10
USB
USBUSB
USB
For USB devices such as printers and USB external hard drives
11
1111
11
RESET
RESETRESET
RESET
To reset the modem to the factory default configuration
User Manual
Page 8
of 28
Getting Started
Setting up the device is easy. The flowchart below provides an outline of the steps
needed to complete the installation. Brief descriptions appear beside each step. Detailed
instructions are provided in the subsequent pages.
Remove/Disable
Conflicts
Plan your Network
Ready to Use
Setup the Router
Connect to the
Internet
Web Interface
Use Quick Setup
You may need to check some
setting or disable some application
before installation.
Connect the telephone cables,
Ethernet cables, and power adaptor.
Use the Quick Start Web GUI to setup
your PPPoE connection.
User Manual
Page 9
of 28
Planning Your Network
Before moving ahead to setup your network, it is a good idea to draw out a network
diagram to help identify your network devices and plan out how to connect these
devices. The illustration below is an example of a network diagram.
Each port in the router can be used for different connections. For example:
• USB 1 – USB printer
• Ethernet 1 – IPTV Set Top Box
• Ethernet 2 – Game Console
• Ethernet 3 – Mom’s Computer
• Ethernet 4 – Dad’s Computer (PC1)
To create a network diagram:
To create a network diagram:To create a network diagram:
To create a network diagram:
• For wireless devices, identify the wireless devices you want to include in the
network
• For wired devices, identify which router port you want to use for each device.
User Manual
Page 10
of 28
Remove or Disable Conflicts
To make sure the router installation moves on smoothly, you need to remove or disable
conflicts that may interfere the installation. Probable conflicts may include:
Internet sharing applications
Proxy software
Security software
TCP/IP settings
Internet properties
Temporary Internet files
Internet Sharing, Proxy, and Security Applications
Internet sharing, proxy software, and firewall applications may interfere with the router
installation. These should be removed or disabled before start the installation.
If you have any of the following or similar applications installed on your computer,
remove or disable them according to the manufacturer’s instructions.
Internet Sharing Applications
Internet Sharing ApplicationsInternet Sharing Applications
Internet Sharing Applications
Proxy Software
Proxy SoftwareProxy Software
Proxy Software
Security Software
Security SoftwareSecurity Software
Security Software
Microsoft Internet Sharing WinGate Symantec
WinProxy Zone Alarm
User Manual
Page 11
of 28
Configuring TCP/IP Settings
Check if your computer uses the default TCP/IP settings.
To check the TCP/IP properties:
1. Select Start > Run. This opens the Run dialog box.
2. Enter control ncpa.cpl and then click OK. This opens the Network Connections in
your computer.
3. Right-click LAN and then select Properties. This opens the Local Area Connection
Properties dialog box.
4. Select Internet Protocol (TCP/IP) and then click Properties. This opens the Internet
Protocol (TCP/IP) dialog box.
5. Select Obtain an IP address automatically.
6. Click OK to close the Internet Protocol (TCP/IP) dialog box.
7. Click OK to close the Local Area Connection Properties dialog box.
Configuring Internet Properties
To set the Internet Properties:
1. Select Start > Run. This opens the Run dialog box.
2. Enter control inetcpl.cpl and then click OK. This opens Internet Properties.
3. Click Connections tab.
4. In the Dial-up and Virtual Private Network settings pane, select Never dial a
connection.
5. Click OK to close Internet Properties.
User Manual
Page 12
of 28
Removing Temporary Internet Files
Temporary Internet files are files from Web sites that are stored in your computer. Delete
these files to clean the cache and remove footprints left by the Web pages you visited.
To remove temporary Internet files:
1. Select Start > Run. This opens the Run dialog box.
2. Enter control and then click OK. This opens Control Panel.
3. Double-click Internet Options. This opens Internet Options.
4. In the Temporary Internet Files pane, click Delete Cookies.
5. Click Delete Files.
6. Click OK to close Internet Properties.
User Manual
Page 13
of 28
Setup the Device
When installing the router, find an area where there are enough electrical outlets for the
router, the main computer, and your other computer devices.
To setup the router:
1. Plug one end of the Ethernet cable from the router’s ETHERNET
ETHERNET ETHERNET
ETHERNET port and then plug
the other end into the Ethernet port in your computer.
2. If you have another device you need to connect through wire into the router, use
another piece of Ethernet cable. Plug one end of the Ethernet cable from the
computer’s Ethernet port and then plug the other end into an available Ethernet
port in the router.
3. Plug one end of the telephone cable from the POTS Splitter’s ADSL
ADSL ADSL
ADSL port and then
plug the other end into the router’s DSL
DSL DSL
DSL port.
POTS Splitter
POTS SplitterPOTS Splitter
POTS Splitter
Your phone line carries with it both phone calls and Internet signals. When you are
using the Internet, the connection produces high-pitched tones that can affect your
voice calls when using the phone. Installing a Plain Old Telephone Service (POTS)
splitter separates the two signals and eliminates the noise.
To setup a telephone on the POTS Splitter:
To setup a telephone on the POTS Splitter:To setup a telephone on the POTS Splitter:
To setup a telephone on the POTS Splitter:
a. Locate the phone jack in your house.
b. Insert the POTS Splitter into the phone jack.
c. Plug one end of the telephone cable from the POTS Splitter’s TEL
TELTEL
TEL port and then plug
the other end into the telephone.
4. Connect the power adapter from the router’s 12V 1.5A DC
port into the electrical
outlet.
5. Press ON.
User Manual
Page 14
of 28
Connecting to the Internet
You can use the Web Interface to setup your Internet connection.
Connecting Via Quick Setup
To connect to the Internet via the User mode GUI:
1. Open your browser
2. Type 192.168.1.254 on the address bar
3. Enter the connection settings
a. Select a Connection Type
b. Select an Encapsulation Mode
c. Enter the PPP Username and Password
4. Click Connect
5. Restart the web browser and you are ready to surf the Internet
User Manual
Page 15
of 28
To connect to the Internet via the Web Interface Setup Wizard:
1. Open your browser and the router will redirect you to the Setup Wizard screen
2. Click on SET UP NOW
3. Type in the username and password supplied by your ISP
4. Click Connect
5. Restart the web browser and you are ready to surf the Internet
User Manual
Page 16
of 28
About the Web User Interface
The Web User Interface is used to configure the basic router settings.
Accessing the Web User Interface
To access the Web User Interface:
1. Open your browser.
2. Type-in 192.168.1.254 on the address bar and then press Enter.
Menus
The Web User Interface includes the following menus:
Quick Setup
Home Network Configuration
Device Status
Statistics
Firewall Configuration
Device Administration
User Manual
Page 17
of 28
Quick Setup
Quick Setup includes Device Info to check basic information on your device and Internet
Login Setup that allows you to control the PPP login account settings.
User Manual
Page 18
of 28
Home Network Configuration
Local Area Network (LAN) Setup
Local Area Network (LAN) SetupLocal Area Network (LAN) Setup
Local Area Network (LAN) Setup
Configure the DSL Router IP Address and Subnet Mask for LAN interface. You may also
configure the DHCP server and Public IP Pass Through settings of your router.
User Manual
Page 19
of 28
DCHP Lease Information
DCHP Lease InformationDCHP Lease Information
DCHP Lease Information
Displays information on the DHCP clients connected to the router.
Broadband Status Notification
Broadband Status NotificationBroadband Status Notification
Broadband Status Notification
If enabled, the router will show push-pages on your web browser to give you
information regarding common broadband connection issues. This will give you an idea
of what is the cause of your Internet connection problem.
User Manual
Page 20
of 28
Device Status
Displays the router information as well as status of different connections such as DSL,
Internet and IPTV.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
