Style Selections RBETA4867-92 Dimensions Guide

Type
Dimensions Guide

This manual is also suitable for

SIZE MODEL NO. DESCRIPTION Width Depth Height
SHOWER WALL KIT
r 48” x 36” RBE4867 Wall Kit 48” to 36” 72”
OPTIONAL COMPONENTS
r 48” x 34” F4834 Shower Base 48” 34” 3”
r 48” x 36” X4862 Extension Wall Kit 48” to 36” 24”
COMPLETE SHOWER KITS
r 48” x 34” RKWF4847 Walls & Base Kit 48” 34” 75”
r 48” x 34” RKWFX4847 Walls, Base, Ext. Kit 48” 34” 99”
72”
48”*
24”
*
* Can be trimmed to t
36”*
Wall Kit
Extension Wall Kit
Shown with F4834 Shower Base, X4862 Extension Wall Kit
48” x 36” shower walls
RBE 4867
FEATURES
48” x 36” Shower Walls for existing construction.
Thick 1⁄4” 100% Solid Surface material for superior strength,
beauty and easy cleaning. Surface will not support bacteria growth.
Walls can be attached to moisture-resistant wall board, or directly
over tile with supplied adhesive. Walls are trimmable for custom t.
Integrated pieces t together for an easy, clean installation. Lap joint
connection between upper and lower back wall forms a watertight seal.
Two wall shelves included for convenient storage
Wall Kit includes two wrap around front edge trim pieces, front and
side top bullnose trim pieces with coped, mitered inside corners, two
inside at corner molding pieces, one 1-oz. tube mounting adhesive,
four 11-oz. tubes 100% silicone adhesive and one roll moutning tape.
10 Year Limited Residential Warranty / 3 Year Commercial Warranty
COLORS
4 Transitions colors with a 16” x 16” square tile pattern.
4 Classic colors with plain pattern.
OPTIONS
Extension wall panels add up to 24” of height to extend shower walls
to ceiling.
Matching shower base with concealed drain.
3 Wall Pockets: horizontal, vertical or arched; Window Trim Kit and
Shower Seats also available. See Accessories Specication sheet for
details.
Specied Model
To Be Specied: Pattern/Color (see below)
r
91 White Carrara
r 92 Silver Mocha
r 94 Sand Mountain
r 96 Almond Sky
16” Square Tile Pattern / Colors
r
01 White
r 08 Biscuit
r 67 Matrix Khaki
r 86 Sea Shore
Plain / Colors
remodel
A
F
B
D
E
MODEL # DESCRIPTION
A RB487U Upper Back Wall (1 panel)
B RB487D Lower Back Wall (1 panel)
C RE367L Left End Wall (1 panel)
D RE367R Right End Wall (1 panel)
E F4834 Shower Base - center drain
F X4882 Extension Wall Kit
C
Concealed drain with color-
matched lift-off drain cover,
2
1
4” mosaic tile pattern.
Lap joint connection
forms a watertight seal
G
SHOWER DOOR
MODEL NO. MAXIMUM WIDTH MAXIMUM HEIGHT
RBE4867 45-1/2” 72”
H
10/01/2013
Product Information
INSTALLATION NOTES:
This product is to be installed according to the installation guide supplied with shower walls.
This product designed to be installed over clean, smooth tile, waterproof drywall or cement board.
If installing directly over tile, remove all loose pieces and ll for a consistent, smooth substrate.
48” x 36” shower walls
RBE 4867
F. Outside Edge
Trim
Inside Flat Corner Mold-
ing (2 pcs.) included for
use on out of square
installation.
Outside Edge
Trim wraps
around
shower wall
for nished
look
The solid surface
bullnose molding used
along the top edge of
the walls is contoured
for easy tting.
G. Bullnose Trim
H. Inside Corner
Molding
F
F
G
OPTIONS: ACCESSORIES
Available for on-site installation. Must be ordered separately. See Accessories Specication for further information.
Horizontal Wall Pocket
WSH2216
Vertical Wall Pocket
WSV0830
Arched Wall Pocket
WSA1522
Window Trim Kit
WTK36
Corner Shower Seat
CSS1414
Rectangular Shower Seat
RSS2412
Back side of wall panel
is reinforced for strength
and support.
side view
of lap joint
connection
remodel
  • Page 1 1
  • Page 2 2

Style Selections RBETA4867-92 Dimensions Guide

Type
Dimensions Guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI