i-PRO i-PRO WV-QCA500A Ethernet Extension Cable User manual

Brand: i-PRO

Model: i-PRO WV-QCA500A Ethernet Extension Cable

Category: Security camera accessories

Type: User manual

i-PRO i-PRO WV-QCA500A Ethernet Extension Cable is a professional piece of equipment for extending Ethernet connections in outdoor environments. Utilizing a waterproof grommet and RJ45 waterproof jack, it enables easy replacement of outdated waterproof connectors on outdoor cameras. PoE compliant, it operates in a wide temperature range (-40°C to +60°C) and humidity (10% to 100% non-condensing). Supporting 10BASE-T and 100BASE-TX network standards, it ensures reliable data transmission.

Operating Instructions

Included Installation Instructions

RJ45 Ethernet Cable For professional use only.

Model No. WV-QCA500A (1 pc.)

WV-QCA500APK (10 pcs.)

󱛠Before attempting to connect or install this product,

please read these instructions carefully

and save this manual for future use.

󱛠The external appearance and other parts shown in this manual may differ from the actual

product within the scope that will not interfere with normal use due to improvement of the

product.

󱛠Also read the Operating Instructions for the camera you are using.

i-PRO Co., Ltd. assumes no responsibility for injuries or property damage resulting

from failures arising out of improper installation or operation inconsistent with this

documentation.

Fs0421-1042

Printed in China

Preface

This product is an Ethernet extension cable with a waterproofing grommet. By using an RJ45

waterproof jack to convert the RJ45 network connector on an outdoor camera, it is possible to

easily replace a past model that uses a waterproof connector.

For the latest information about the supported cameras, refer to our support website

(https://i-pro.com/global/en/surveillance/training_support/support/technical_information

<Control No.:C0501>).

Specifications

Power source*1: PoE (IEEE802.3af compliant)

Ambient operating temperature: –40 °C to +60 °C {–40 °F to +140 °F}

Ambient operating humidity: 10 % to 100 % (no condensation)

Storage temperature: –30 °C to +60 °C {–22 °F to +140 °F}

Storage humidity: 10 % to 95 % (no condensation)

Network*1: 10BASE-T / 100BASE-TX / RJ45 connector

Mass: Approx. 35 g {0.08 lbs}

*1 The specifications of the network camera body apply.

Precaution

Do not attempt to disassemble or modify this product.

Failure to observe this may cause fire or electric shock. Consult the dealer for the repair or

inspections.

Refer installation work to the dealer.

Installation work requires technique and experience. Failure to observe this may cause fire,

electric shock, injury, or damage to the product. Be sure to consult the dealer.

Turn the power off when do wiring of this product.

Failure to observe this may cause electric shock. In addition, short circuit or wrong wiring may

cause fire.

Correctly perform all wiring.

Short circuits in the wiring or incorrect wiring may cause fire or electrical shock.

For U.S. and Canada:

i-PRO Americas Inc.

https://www.i-pro.com/

For Europe and other countries:

i-PRO Co., Ltd. Fukuoka, Japan

https://www.i-pro.com/

i-PRO EMEA B.V. UK Branch

1010 Cambourne Business Park,

Cambridgeshire CB23 6DP

Authorised Representative in EU:

i-PRO EMEA B.V.

Laarderhoogtweg 25, 1101 EB

Amsterdam, Netherlands

WV-QCA500A_PGQX2459YAC6_英.indd 1 2021/10/28 11:29:16

Caution:

󱛠This product is a professional equipment.

󱛠Before attempting to connect or operate this product, please read these instructions

carefully.

Standard accessories

Operating Instructions (this document) 1 pc. RJ45 waterproof connector cover 1 pc.

RJ45 waterproof connector cap 1 pc.

Precautions for installation

Make sure to remove this product if it will no longer be used.

Installation

This product is used when attaching outdoor type network cameras using waterproof

connectors. The outdoor dome type camera is used as an example when describing

attachment procedures in these instructions.

Step 1

Step 2  If the waterproof connector part of an existing camera is

broken, rework the network cable and attach the included

waterproof connector.

( Refer to the Installation Guide for the existing camera.)

WV-QCA500A

(RJ45 Ethernet cable)

WV-QCA500A

Jack portion

RJ45

Waterproof jack

RJ45

plug

Waterproof connector part

of the existing camera

RJ45 waterproof

connector cover

RJ45 waterproof

connector cap

Tighten until no gap is present

Align “ ” with “ ” and then

rotate until “ ” aligns with “ ”

View from inside the camera

Inside

Outside

WV-QCA500A_PGQX2459YAC6_英.indd 2 2021/10/28 11:29:16

i-PRO i-PRO WV-QCA500A Ethernet Extension Cable User manual

Brand: i-PRO

Model: i-PRO WV-QCA500A Ethernet Extension Cable

Category: Security camera accessories

Type: User manual

Download PDF

report

i-PRO i-PRO WV-QCA500A Ethernet Extension Cable User manual

i-PRO i-PRO WV-QCA500A Ethernet Extension Cable User manual

Related papers

Other documents