Midea S8 User guide

Category
Robotic vacuum cleaners
Type
User guide

Midea S8 is an advanced robotic cleaner designed to make your life easier. With its powerful suction, it can effortlessly remove dirt, dust, and debris from hard floors and carpets. The S8 also features a mopping function for a deep clean. It can be controlled remotely via a smartphone app, allowing you to schedule cleaning sessions, adjust settings, and monitor its progress. The S8's intelligent sensors help it navigate around obstacles and avoid falls, making it safe to use even in complex environments.

Midea S8 is an advanced robotic cleaner designed to make your life easier. With its powerful suction, it can effortlessly remove dirt, dust, and debris from hard floors and carpets. The S8 also features a mopping function for a deep clean. It can be controlled remotely via a smartphone app, allowing you to schedule cleaning sessions, adjust settings, and monitor its progress. The S8's intelligent sensors help it navigate around obstacles and avoid falls, making it safe to use even in complex environments.

Install side
brushes
2
Connect Robot to Station
45Start to clean
6
Press the network pairing key for 3 seconds
Press the " + " button on the main screen of
the app and elect S8+ from the available
list of products
Enter the device addition wizard
Network pairing
Place the dust
collector station
3
Quick Start Guide
Dust collector station and
robot preparation
Tidy the room
Remove the retainer Peel off the bumper plate protection film Peel off the protection film
1
Remove the protection bar
Put extra power cords in their storage slot
0 .5 m
0 .5 m
1.5 m
Briefly press it for 1 second
to start/pause
Fill the tank with water to the MAX line
Water inlet/outlet
Prior to use, put in order furniture including tables and chairs, as well as floor fans and
other objects, and gather weighing scales, wires and other lower objects in order for
maximum cleaning space. Do not use the mopping function on floor carpets.
Option 1 Fast Connect
Option 2 Connect Manually
When robot is under powered-off status,long press “ ” for 3 seconds
The connection will automatically complete after robot turned on.A
sound of “Di-du” means connected successfully.
When robot is under powered-on status,long press “ ” and “ ” for 3
seconds at the same time.If connected successfully,a “Di-du” sound
will be heard and station indicator light will flicker 3 times.
Safety Instruction
1. This product is an indoor domestic product, not for use outdoor;
2. Do not use it in a humid environment (such as bathroom);
3. This product shall not bear an object (or person) exceeding 10 kg;
4. Do not touch power cords, sockets or power adapters with your wet hands;
5. Do not submerge the robotic cleaner in water, and avoid it from going close to
heating apparatus or subject to direct sunlight to prevent fire hazards;
6. Do not fill the vibration tank with washing powder, laundry detergent, cleaning
agents, disinfectants, hand sanitizers, unknown oily liquids, and alkaline
substances to avoid unknown damages. Only use municipal water for the
disinfection module;
7. To ensure better use effect of the machine, please let it go from its charging
point to complete the mapping work when being used initially.
  • Page 1 1
  • Page 2 2

Midea S8 User guide

Category
Robotic vacuum cleaners
Type
User guide

Midea S8 is an advanced robotic cleaner designed to make your life easier. With its powerful suction, it can effortlessly remove dirt, dust, and debris from hard floors and carpets. The S8 also features a mopping function for a deep clean. It can be controlled remotely via a smartphone app, allowing you to schedule cleaning sessions, adjust settings, and monitor its progress. The S8's intelligent sensors help it navigate around obstacles and avoid falls, making it safe to use even in complex environments.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI