Siren Marine Harness 2 User guide

I've reviewed the user manual for the Siren Marine Wiring Cable 2 (Harness 2) for the Siren 3 Series devices. This document details the wiring configurations, including color codes, input/output functions, and specific uses such as High Water and Security inputs, as well as Relay Control outputs. I'm ready to answer any questions you have about installing and using this wiring cable.
What is the purpose of the yellow wire?

What is the function of the white wire?

Is there a dedicated ground wire?

Text

Wire Color Input/Output Function

Red Output Reserved

Brown Output Reserved

Gray Input Reserved

Black Input Reserved

Yellow Input High Water 2

Pink Input Security 2

Dark Green Input Acc. Ground (optional)

White Output Relay Control 3

Blue Output Relay Control 4

Purple Output Reserved

Orange Input Reserved

Light Green Input Security 3

Siren Marine: Wiring Cable 2 (Harness 2)

For Siren 3 Series Devices

Installation Instructions:

1. Attach the Wiring Cable 2 connector to the device Harness 2 connector

by matching the 12-PINs, then screw together tightly.

2. Connect selected wired sensors using Posi-Tap? connectors, terminal

block, or other connection type.

/

Other documents