Siren Marine Harness 2 User guide

Text

Wire Color Input/Output Function

Red Output Reserved

Brown Output Reserved

Gray Input Reserved

Black Input Reserved

Yellow Input High Water 2

Pink Input Security 2

Dark Green Input Acc. Ground (optional)

White Output Relay Control 3

Blue Output Relay Control 4

Purple Output Reserved

Orange Input Reserved

Light Green Input Security 3

Siren Marine: Wiring Cable 2 (Harness 2)

For Siren 3 Series Devices

Installation Instructions:

1. Attach the Wiring Cable 2 connector to the device Harness 2 connector

by matching the 12-PINs, then screw together tightly.

2. Connect selected wired sensors using Posi-Tap? connectors, terminal

block, or other connection type.