COMHAS 15263 User manual

Type
User manual
Manual Appendix for
AT10*-..MS/MS2/MSX Rev 1
Page 1 of 3
Prepared:
F.Meyer
Approved:
Pressure and Differential Pressure switches,
gauges and transmitters, COMHAS Series
AT-10*.. -MS/MS2/MSX
Manual appendix
Revision: 1
Date: 22/04/2022
Manual Appendix for
AT10*-..MS/MS2/MSX Rev 1
Page 2 of 3
Prepared:
F.Meyer
Approved:
OPENING OF THE CASE
If you need to open the case, please make sure as per PIC.1
to unscrew the locking screw.
- MAKE SURE YOU ARE IN SAFE AREA OR
AUTHORIZED BY ATEX PEOPLE.
Once locking screw is off, you can turn the cover to open the
case.
PIC.1
THREADED LOCKING RING
Turn anti clockwise the threaded locking ring using a screw driver as per PIC.2
PIC.2
Manual Appendix for
AT10*-..MS/MS2/MSX Rev 1
Page 3 of 3
Prepared:
F.Meyer
Approved:
MS/MS2/MSX ALUMINUM BEZEL
Once the locking ring is off, you can easily remove the aluminum bezel (PIC.3) and access MS or MS2 to do the wiring, and
then follow MS or MS2 enclosed manuals for wiring.
PIC.3
To close the unit, simply follow same instructions backwards.
  • Page 1 1
  • Page 2 2
  • Page 3 3

COMHAS 15263 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI