TODDY PRO SERIES VALVE User manual

Brand: TODDY

Model: PRO SERIES VALVE

Type: User manual

Cleaning Blank

FERRULE

GASKET

TRI-CLAMP

TRI-CLAMP

TRI-CLAMP WING NUT

FERRULE

GASKET

HOSE

BARB

HOSE

BUTTERFLY VALVE

PRO SERIES BREWER

HANDLE LOCK (IN OFF/CLOSED POSITION)

HANDLE

PRO SERIES VALVE

ToddyCafe.com/Brewing

©2021 Toddy, LLC All rights reserved. Version: 11-2021

2 Replacement Gaskets

(USED ONLY WHEN

CLEANING BREWER)

For video tutorials and more

information, please visit

ToddyCafe.com/Brewing

Assembly Instructions

1

Twist the wing

nuts on the 2

tri-clamps

counterclockwise

to loosen and

remove from the

assembly.

3

Clean all parts

before first use. We

recommend using

Toddy® Cleaner.

(See cleaning

instructions on

Brewing Guide.)

4

Place a gasket

against the brewer

ferrule, ensuring the

flange of the gasket

is seated inside the

indentation ring of

the ferrule.

2

Remove 2

plastic shipping

squares (not

pictured) from

assembly and

discard.

8

Place the hose barb against the

other side of the gasket. Position

the barb toward the bottom of

the valve (see image).

9

Attach a tri-clamp around the fitting

so the wing nut faces upward and is on

the right side of the fitting while

facing the unit. Hand tighten securely.

5

Place the butterfly valve against

the other side of the gasket so

that the handle is upward and

points away from the system

when the valve is open. Pull out

on the handle to unlock, and

move it to the off/closed position.

6

Attach a tri-clamp

around the fitting so

that the wing nut faces

upward and is on the

right side of the fitting

while facing the unit.

Hand tighten securely.

7

Place a second gasket

on the exposed side of

the butterfly valve,

ensuring the flange of

the gasket is seated

inside the indentation

ring.

1

TODDY PRO SERIES VALVE User manual

Brand: TODDY

Model: PRO SERIES VALVE

Type: User manual

Related papers

Other documents