TODDY PRO SERIES VALVE User manual

Brand
TODDY
Model
PRO SERIES VALVE
Type
User manual
Cleaning Blank
FERRULE
GASKET
TRI-CLAMP
TRI-CLAMP
TRI-CLAMP WING NUT
FERRULE
GASKET
HOSE
BARB
HOSE
BUTTERFLY VALVE
PRO SERIES BREWER
HANDLE LOCK (IN OFF/CLOSED POSITION)
HANDLE
PRO SERIES VALVE
ToddyCafe.com/Brewing
©2021 Toddy, LLC All rights reserved. Version: 11-2021
2 Replacement Gaskets
(USED ONLY WHEN
CLEANING BREWER)
For video tutorials and more
information, please visit
ToddyCafe.com/Brewing
Assembly Instructions
1
Twist the wing
nuts on the 2
tri-clamps
counterclockwise
to loosen and
remove from the
assembly.
3
Clean all parts
before first use. We
recommend using
Toddy® Cleaner.
(See cleaning
instructions on
Brewing Guide.)
4
Place a gasket
against the brewer
ferrule, ensuring the
flange of the gasket
is seated inside the
indentation ring of
the ferrule.
2
Remove 2
plastic shipping
squares (not
pictured) from
assembly and
discard.
8
Place the hose barb against the
other side of the gasket. Position
the barb toward the bottom of
the valve (see image).
9
Attach a tri-clamp around the fitting
so the wing nut faces upward and is on
the right side of the fitting while
facing the unit. Hand tighten securely.
5
Place the butterfly valve against
the other side of the gasket so
that the handle is upward and
points away from the system
when the valve is open. Pull out
on the handle to unlock, and
move it to the off/closed position.
6
Attach a tri-clamp
around the fitting so
that the wing nut faces
upward and is on the
right side of the fitting
while facing the unit.
Hand tighten securely.
7
Place a second gasket
on the exposed side of
the butterfly valve,
ensuring the flange of
the gasket is seated
inside the indentation
ring.
  • Page 1 1

TODDY PRO SERIES VALVE User manual

Brand
TODDY
Model
PRO SERIES VALVE
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents