Rugged Radios RW-H30-DT-PTT User manual

Type
User manual

Rugged Radios RW-H30-DT-PTT is a wireless headset with advanced features for clear communication and long-range connectivity. It offers instant power-on, adjustable volume, and a 5-pin radio port for connection to handheld radios. The device is powered by a rechargeable 3.7v Li-Ion 1500mAh battery with an operation life of at least 24 hours. With Bluetooth 2.1 Class 1 and a range of up to 1000 feet, it provides reliable wireless communication. The headset's LED indicator displays the connection status and battery level, and it includes a low battery warning feature.

Rugged Radios RW-H30-DT-PTT is a wireless headset with advanced features for clear communication and long-range connectivity. It offers instant power-on, adjustable volume, and a 5-pin radio port for connection to handheld radios. The device is powered by a rechargeable 3.7v Li-Ion 1500mAh battery with an operation life of at least 24 hours. With Bluetooth 2.1 Class 1 and a range of up to 1000 feet, it provides reliable wireless communication. The headset's LED indicator displays the connection status and battery level, and it includes a low battery warning feature.

Wireless
Double Talk Headset
LED
Shows the status of connection.
VOLUME
Adjusts headset speaker volume.
POWER/PAIR
Instant On: Press
button briey and
LED turns on.
Power Off: Hold for
2~3 seconds until
LED is amber color.
WHITE Button:
Slave headset.
BLACK Button:
Master
5-PIN RADIO PORT
Connect handheld radio.
RADIO PTT
Activate transmit on
connected handheld
radio.
}
RECHARGE PORT
Use supplied 5V DC
charger.
CHECK BATTERY LEVEL
LED : Count the Amber blink at powering up. 3 blinks = +80%, 2 blinks = 30~80%, 1 blink = below 30%.
SOUND : Count the “BEEPS” at power up. 3 beeps = +80%, 2 beeps = 30~80%, 1 beep = below 30%
LOW BATTERY WARNING
If you hear a “BEEP” every 1 min while the headset is active, the headset battery is low and needs to be charged (usually, it takes 4
hours for the full charge).
HOW TO PAIR
The new set is already paired and do not require pairing; Pairing is only required for a replacement unit.
• Make sure the headset power is off.
Start with the slave unit. Press the Power/Pair button for 7~8 seconds until you hear “beep beep beep” or watch for the LED
change from green to amber.The Master unit will beep once every ve seconds. Complete pairing and auto-connection takes
about 45 ~ 50 seconds. Once the pairing is established, pairing is not required again.
ELECTRICAL SPECIFICATIONS
RF type ........................................................... Bluetooth 2.1 Class 1
Frequency ...................................................... 2.400 – 2.485 GHz
Max transmit ................................................. +20 dBm
RF sensitivity .................................................. -90 dBm
Range ............................................................ 1000 Ft with a line of sight ( external antenna)
....................................................................... 500 Ft with a line of sight ( internal antenna)
Battery ........................................................... 3.7v Li-Ion 1500mAh
Charging Voltage ............................................ 5V DC only
Operation life .................................................. At least 24 hours with continuous connection after full charge
Charging time ................................................. 3 ~ 5 hours
509 Traffic Way, Arroyo Grande, CA 93420 local (805) 541-1696 • toll free (888) 541-7223 • fax (805) 541-1679
www.ruggedradios.com
  • Page 1 1

Rugged Radios RW-H30-DT-PTT User manual

Type
User manual

Rugged Radios RW-H30-DT-PTT is a wireless headset with advanced features for clear communication and long-range connectivity. It offers instant power-on, adjustable volume, and a 5-pin radio port for connection to handheld radios. The device is powered by a rechargeable 3.7v Li-Ion 1500mAh battery with an operation life of at least 24 hours. With Bluetooth 2.1 Class 1 and a range of up to 1000 feet, it provides reliable wireless communication. The headset's LED indicator displays the connection status and battery level, and it includes a low battery warning feature.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI