Reflying RST67 User manual

Brand
Reflying
Model
RST67
Type
User manual

Reflying RST67 is a MagSpeed 2-in-1 Wireless 15W Charging Station that can wirelessly charge your iPhone and AirPods simultaneously. It features two wireless outputs: one for your iPhone and one for your AirPods case. The magnetic wireless output for your iPhone ensures secure alignment and fast charging. With a total output of 20W, it provides quick and efficient charging for your devices.

Reflying RST67 is a MagSpeed 2-in-1 Wireless 15W Charging Station that can wirelessly charge your iPhone and AirPods simultaneously. It features two wireless outputs: one for your iPhone and one for your AirPods case. The magnetic wireless output for your iPhone ensures secure alignment and fast charging. With a total output of 20W, it provides quick and efficient charging for your devices.

USER MANUAL
For devices other than iPhone 12 series and above, apply the metal
attachment ring to the outside of your phone case using the included
applicator guide. Metal attachment ring is to be applied directly on
the outside of phone cases only.
1. Place the guide over the back of your phone. Align your phone
vertically so that each edge matches the same number on both sides.
2. Align your phone horizontally so that each edge matches the same
letter on both sides.
3. If there are no obstructions, peel the protective layer from the metal
attachment ring, and apply them to your phone case using the
applicator guide.
device on the magnetic wireless output (B). Your device should
begin to wirelessly charge.
To achieve fast charging, ensure you are using a charger that is capable
of fast charging. Some cases may interfere with wireless charging if they
contain metallic material or are overly thick.
Place your AirPods wireless charging case on the wireless output 2 (C).
Your AirPods should begin to wirelessly charge. See below for indicator
light (D) statuses for the wireless output 2 (C).
Magnetic wireless output 1
Wireless output 2
Indicator light
Solid blue Powered and on standby
Breathing red Wirelessly charging
Flashing blue and red Foreign object on wireless output
MagSpeed 2-in-1 Wireless
15W Charging Station
RST67
5.0V⎓3.0A (15.0W)
9.0V⎓3.0A (27.0W)
12.0V⎓3.0A (36.0W)
5.0W, 7.5W, 10.0W, 15.0W
5.0W
20.0W Max
RF exposure required while used 20cm away from the
human body.
MagSpeed 2-in-1
Wireless 15W Charging Station
Model: RST67
Coil A: -10.14dBuA/m@10m
Coil B: -10.54dBuA/m@10m
Coil A: 121.84-205.12 kHz
Coil B: 126.60-128.90 kHz
Hereby, Shenzhen Reflying Electronic Co., Ltd declares that this product is in compliance with Directive 2014/53/EU. The full text of the
EU declaration of conformity is available at the following internet address by clicking on the Compliance Documentation link at:
www.reflying.com
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator and your body.
(for EU Compliance)
  • Page 1 1

Reflying RST67 User manual

Brand
Reflying
Model
RST67
Type
User manual

Reflying RST67 is a MagSpeed 2-in-1 Wireless 15W Charging Station that can wirelessly charge your iPhone and AirPods simultaneously. It features two wireless outputs: one for your iPhone and one for your AirPods case. The magnetic wireless output for your iPhone ensures secure alignment and fast charging. With a total output of 20W, it provides quick and efficient charging for your devices.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents