Angelo Decor AD95219 Operating instructions

Thank you for buying an Angelo Décor Fountain!

We hope you will find these instructions helpful in setting up your fountain.

If you have any issues with this item, please DO NOT return the unit to place of purchase.

Please visit our web site, www.angelodecor.com, for assistance and warranty information.

First unpack carton carefully, arranging parts safely in your working area.

Now simply fill with clean water and plu

into a

rounded GFCI outle

We recommend kee

bowl 3/4 full of water to avoid

burnout.

Final assembly

should

look like this

Unpack and

arrange all parts.

Slide the optional light

feature into the holder at

the back of the fountain.

Connect the cord from the

light to the transformer.

ttach the tubing to the

pump. Set the pump to

full strength. If splash

is a concern, adjust the

flow as needed.

Place the pump inside the reservoir, being certain it

is fully submersed and sitting flat on the base.