Zeapa HBT600-3 User guide

Brand: Zeapa

Model: HBT600-3

Type: User guide

Zeapa HBT600-3 is a wireless doorbell with a modern and stylish design. It has a piano button on the emitter for easy use and 36 selected chimes to choose from. You can adjust the sound volume to 4 levels and it has a super long transmission range of up to 1000 meters without obstacles. Installation is simple - you can use the sticky pad provided or screws/anchors. It's energy-efficient and low-maintenance, with easy battery replacement.

No.

Item

Receiver Working Voltage

Waage

Transmission range (without obstacles)

Choosing Chimes

Sound Volume

Working Frequency

Working Temperature

Waterproof Level (Don’t drop into water)

Parameter

AC 85-265V

＜0.5w

500-1000

25-110dB, 4levels

433.92MHz±280KHz

-30℃~70℃

IP44

Features

What You Should Know Before Installaon

Quick Start

1. Sound Volume Adjust: Press the volume buon on the receiver ll the sound

volume level that you prefer, then release your hands.

2. Set Chimes: 36 chimes included for your opon, press chimes seng buon

ll the one that you prefer, then release your hands.

1. The emier supplied with this kit is already paired with receivers and

set to default tune “Dingdong”, also can press Chimes Buon of receivers

ll your favorite chimes selected.

2. It is not advisable to mount the emier onto METAL SURFACES, as the

material can BLOCK RF signals between emier and receiver.

3. We recommend to use the scky pad provided as ﬁrst opon, using screws

as second opon.

4. Transmission range will decrease if baery in emier is in a low volume

status.

5. It is not advisable to mount the emier outdoor directly WITHOUT any

SHELTER which could accelerate aging of key electric components.

·Modern and stylish design

·Piano buon of emier, brings good touch feels.

·36 selected chimes

·4-level adjustable sound volume.

·Super long transmission range.

·Easy to install and use

·Lower power consumpon

Sound buon

Volume buon

Speaker

AC plug

Press buon

Installat ion Methods

1. Test the doorbell working status and transmission range f irst before

installaon, baery inside emier already.

Receiver

Emier

2. Plug receivers into standard outlet of the room you oen stay, then it will work.

3. Install the emier, there are two opons for choosing.

a. Choose a ﬂat area that you intend to install, then use dry cloth to clean.

b. tear oﬀ one side ﬁlm of pad and sck to emier, then the other side and sck to

the area that you intend to put on, pressing 10 secs.

Opt ion-1, Double-sided adhesive pad

AC 85V~265V Receiver

Sck to

emier

back cover

Sck emier

to the area

→

Opt ion-2, Screws/Screws and Anchors

Please prepare an electric drill and screwdriver before installaon.

a. Mark the hole area that you intend to install.

b. Drill two holes on the marked area, then insert anchors into the hole, or use

screws directly on the surface, such as wood surface etc.

c. Use a ﬂat screwdriver to PRY open the bracket or back cover of the emier.

Pry via slot

Install baery

d. Screw up the bracket or back of the emier.

Screw up the

back cover

Drill hole and

install anchors

→

Please carefully read this Welcome Guide before using and installaon

Plug-in Wireless Doorbell

Welcome Guide Zeapa R

Zeapa HBT600-3 User guide

Zeapa HBT600-3 User guide

Other documents