Garmin StreetPilot Series StreetPilot Owner's manual

owner’s

manual

and

reference

guide

12 parallel channel receiver

StreetPilot

TM

GPS

GARMIN International, Inc.

1200 E 151

st

Street, Olathe, Kansas 66062 U.S.A.

Tel. 913/397.8200 or 800/800.1020

Fax. 913/397.8282

GARMIN (Europe) Ltd.

Unit 5, The Quadrangle, Abbey Park Industrial Estate,Romsey, SO51 9AQ U.K.

Tel. 44/1794.519944

Fax.44/1794.519222

GARMIN (Asia) Corp.

No. 68, Jangshu 2

nd

Road, Shijr, Taipei County, Taiwan

Tel. 886/2.2642.9199

Fax. 886/2.2642.9099

stored in any storage medium, for any purpose without prior written consent of GARMIN Corporation. GARMIN Corporation hereby grants permission to

download a single copy of this manual onto a hard drive or other electronic storage medium to be viewed for personal use, provided that such electronic or

printed copy of this manual contains the complete text of this copyright notice and provided further that any unauthorized commercial distribution of this

manual is strictly prohibited.

Information in this manual is subject to change without notice. GARMIN Corporation reserves the right to change or improve its products and to make

changes in the content without obligation to notify any person or organization of such changes. Visit the GARMIN website for downloadable upgrades to the

operating software and the Owner’s Manual. The website also contains information concerning the use and operation of other GARMIN products.

Website address: www.garmin.com

GARMIN

®

, AutoLocate

®

, and TracBack

®

are registered trademarks, StreetPilot

TM

, MapSource

TM

and MetroGuide

TM

are trademarks of GARMIN Corpora-

tion and may not be used without the express permission of GARMIN Corporation.

June 2000 Part Number 190-00120-00 Rev. C Printed in Taiwan

Introduction

i

About This Manual

Warnings, Notes and Additional Information

Throughout the manual you will find

statements containing important information

about using the StreetPilot.

Warnings - provide you with information

about safe use of the StreetPilot.

Notes - provide you with information for

better understanding and efficient use of the

StreetPilot features.

Additional Information - provides you with

easy methods of operation once you have

become familiar with the StreetPilot’s operating

features.

Thank you for choosing the GARMIN StreetPilot. The StreetPilot represents GARMIN’s

continuing commitment to provide quality navigation information in a versatile and user-friendly

design you will enjoy for years. To get the most value from your new GPS, please take time to read

through this owner’s manual in order to understand the operating features of the StreetPilot. This

manual is organized into four sections for your convenience.

The Introduction section provides FCC and safety information and the Table of Contents.

The Quick-Start section introduces you to the basic features of the unit and provides a

quick-start orientation to the StreetPilot.

The Reference section provides details about the complete feature setup of the StreetPilot by topic.

The Appendices section contains information on items such as accessories, specifications, a

trouble shooting guide and an index by subject.

Before getting started with your GPS, check to see that your GARMIN StreetPilot package

includes the following items. If you are missing any parts, please contact your GARMIN dealer

immediately.

Standard Package:

!

StreetPilot Unit with Detachable Antenna

!

Six AA Batteries

!

Owner’s Manual

!

Quick Start Guide

!

Dash Mount Kit with Installation Instructions

!

Data transfer Cable

SECTION 1

ii

Introduction

Cautions and Warnings

CAUTION: The Global Positioning System (GPS) is operated by the government of the United

States, which is solely responsible for its accuracy and maintenance. The system is subject to changes

that could affect the accuracy and performance of all GPS equipment. Although the StreetPilot is a

precision NAVigation AID (NAVAID), any NAVAID can be misused or misinterpreted and, therefore,

become unsafe.

WARNING: For use in vehicles, it is the sole responsibility of the owner/operator of the StreetPilot

to place and secure the GPS unit so that it will not interfere with the vehicle operating controls and

safety devices, obstruct the driver’s view of driving conditions, or cause damage or personal injury in

the event of an accident. Do not mount the StreetPilot over airbag panels or in the field of airbag

deployment. Airbags expand with a rapid force that can propel objects in their path towards the vehicle

driver or passengers causing possible injury. Refer to airbag safety precautions contained in the vehicle

owner’s manual. Do not mount the StreetPilot in a place where the driver or passengers are likely to

impact it in an accident or collision. The mounting hardware provided by GARMIN is not warranted

against collision damage or the consequences thereof.

WARNING: When used in vehicles, it is the sole responsibility of the driver of the vehicle to

operate the vehicle in a safe manner, maintain full surveillance of all driving conditions at all times, and

not become distracted by the StreetPilot to the exclusion of safe driving practices. It is unsafe to operate

the controls of the StreetPilot while you are driving. Failure by the driver of a vehicle equipped with a

StreetPilot to pay full attention to operation of the vehicle and road conditions while the vehicle is in

motion could result in an accident or collision with property damage and personal injury.

NOTE: The StreetPilot Bean Bag Dash Mount

Accessory is designed to stabilize the unit during normal

operation of a vehicle. It will not, however, secure the unit

to the vehicle dash in the event of emergency braking or

sharp turns. If you desire the added safety of a secure

mount, use the StreetPilot Dash Mount Bracket and

permanent adhesive supplied with the bracket.

Do Not Mount Over

Airbag Panels

Do Not Mount

in Front of an

Airbag Field

of Deployment

Do Not Mount Where Drivers

Field of Vision is Blocked

Do Not Place Unsecured

on the Vehicle Dash

Introduction

iii

Cautions

MAP DATA INFORMATION: One of the goals of GARMIN is to provide customers with the most

complete and accurate cartography that is available to us at a reasonable cost. We use a combination of

governmental and private data sources, which we identify as required in product literature and

copyright messages displayed to the consumer. Virtually all data sources contain inaccurate or incom-

plete data to some degree. This is particularly true outside the United States, where complete and

accurate digital data is either not available or prohibitively expensive.

CAUTION: IT IS THE USER’S RESPONSIBILITY TO USE THIS PRODUCT PRUDENTLY. THIS

PRODUCT IS INTENDED TO BE USED ONLY AS A TRAVEL AID AND MUST NOT BE USED FOR

ANY PURPOSE REQUIRING PRECISE MEASUREMENT OF DIRECTION, DISTANCE, LOCATION,

OR TOPOGRAPHY. THIS PRODUCT SHOULD NOT BE USED TO DETERMINE GROUND PROXIM-

ITY FOR AIRCRAFT NAVIGATION

Software License Agreement

BY USING THE STREETPILOT, YOU AGREE TO BE BOUND BY THE TERMS AND CONDI-

TIONS OF THE FOLLOWING SOFTWARE LICENSE AGREEMENT. PLEASE READ THIS AGREE-

MENT CAREFULLY.

GARMIN Corporation (“GARMIN”) grants you a limited license to use the software embedded in

this device (the “Software”) in binary executable form in the normal operation of the product. Title,

ownership rights and intellectual property rights in and to the Software remain in GARMIN.

You acknowledged that the Software is the property of GARMIN and is protected under the

United States of America copyright laws and international copyright treaties. You further acknowledge

that the structure, organization and code of the Software are valuable trade secrets of GARMIN and that

the Software in source code form remains a valuable trade secret of GARMIN. You agree not to

decompile, disassemble, modify, reverse assemble, reverse engineer or reduce to human readable form

the Software or any part thereof or create any derivative works based on the Software.

You agree not to export or re-export the Software to any country in violation of the export

control laws of the United States of America.

iv

Introduction

FCC Compliance

The GARMIN StreetPilot has been tested to comply with FCC Standards for home and office

use. It complies with Part 15 of the Federal Communications Commission (FCC) limits for Class B

digital devices. This equipment generates, uses, and can radiate radio frequency (RF) energy and, if

not installed and used in accordance with instructions, may cause harmful interference to radio

communications.

There is no guarantee that interference will not occur in a particular installation. If this device

does cause harmful interference to other equipment, which can be determined by turning this device

off and on, you are encouraged to try and correct the interference by increasing the separation

between this device and other equipment or reorienting or relocating the receiving antenna.

Consult an authorized dealer or other qualified service technician for additional help if these

remedies do not correct the problem. Operation is subject to the following conditions: (1) This device

cannot cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

Specifically when operating inside an automobile, interference is possible from AM/FM radios,

cassette or CD players, or mobile telephones, among other electronic devices. If you suspect the unit is

experiencing harmful interference (as evidenced by poor satellite reception), try relocating the

StreetPilot in the automobile to remedy the situation.

The StreetPilot does not contain any user-serviceable parts. Repairs should only be made by an

authorized GARMIN service center. Unauthorized repairs or modifications could void your warranty

and your authority to operate this device under Part 15 regulations.

Introduction

v

Limited Warranty

GARMIN Corporation warrants this product to be free from defects in materials and manufac-

ture for one year from the date of purchase. GARMIN will, at its sole option, repair or replace any

components that fail in normal use. Such repairs or replacement will be made at no charge to the

customer for parts or labor. The customer is, however, responsible for any transportation costs. This

warranty does not cover failures due to abuse, misuse, accident or unauthorized alteration or repairs.

THE WARRANTIES AND REMEDIES CONTAINED HEREIN ARE EXCLUSIVE AND IN LIEU

OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED OR STATUTORY, INCLUDING ANY LIABIL-

ITY ARISING UNDER ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE, STATUTORY OR OTHERWISE. THIS WARRANTY GIVES YOU SPECIFIC LEGAL

RIGHTS, WHICH MAY VARY FROM STATE TO STATE.

IN NO EVENT SHALL GARMIN BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT OR

CONSEQUENTIAL DAMAGES, WHETHER RESULTING FROM THE USE, MISUSE, OR INABILITY

TO USE THIS PRODUCT OR FROM DEFECTS IN THE PRODUCT. SOME STATES DO NOT

ALLOW THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE

LIMITATIONS MAY NOT APPLY TO YOU.

To obtain warranty service, call the GARMIN Customer Service department (913-397-8200) for

a returned merchandise tracking number. The unit should be securely packaged with the tracking

number clearly marked on the outside of the package and sent freight prepaid and insured to a

GARMIN warranty service station. A copy of the original sales receipt is required as the proof of

purchase for warranty repairs. GARMIN retains the exclusive right to repair or replace the unit or

software or offer a full refund of the purchase price at its sole discretion. SUCH REMEDY SHALL BE

YOUR SOLE AND EXCLUSIVE REMEDY FOR ANY BREACH OF WARRANTY.

vi

Introduction

Table of Contents

Section One - INTRODUCTION

About This Manual..............................i

Cautions & Warnings............................ii

Software License Agreement...............iii

FCC Compliance.................................iv

Limited Warranty................................v

“How To” Index.................................vii

StreetPilot Unit...............................viii

Section Two - QUICK-START

Battery/Data Card Installation...............1

Keypad Usage...................................2

Turning the Unit On and Off..............3

Screen Brightness/Contrast.............4

Dash Mounting and External Power....5

Finding Your Location.....................6

Using the Simulator ..............................8

Main Page Sequence............................9

Map Zooming and Panning.................10

The Trip Computer OPTION Key.......11

Making Keypad Entries.....................12

Using Find and Goto.........................14

Finding HighwayExits..........45

Finding a Point of Interest......46

Finding an Address................48

Finding an Intersection..........51

Section Three - REFERENCE

The Map Page...................................15

Zooming.............................16

Driving Status.....................17

Navigation Information..........17

Map Panning.......................18

Personal Waypoints..............19

Goto a Waypoint....................20

Map Page Options...............21

Customizing the Map ............22

The Dashboard Page..........................26

The Trip Computer............27

Satellite Status.....................30

System Setup....................................32

‘General’ File Tab.................34

‘Alarms’ File Tab..................35

‘Time’ File Tab.....................36

‘Comm Port’ File Tab...........37

Marking Your Location ....................39

Find Functions.................................41

Finding a City.....................41

Finding a Personal Waypoint..44

Deleting Personal Waypoints..45

Navigating on a Direct Goto............52

Routes.................................................54

Creating a Route....................54

Editing an Existing Route.......56

Selecting or Deleting a Route.58

Copying a Route....................59

Driving on a Route..............................60

Section Four - APPENDICES

A Accessories....................................63

B Specifications................................65

C Wiring/Interfaces.............................67

D Maintenance.................................69

E Messages...............................70

F Navigation Terms.............................71

G UTC Offset Tables...........................72

H Index.........................................73

Introduction

vii

“How To” Index

The list below is provided to help you quickly find some of the more important

procedures you will use on your new StreetPilot.

TO DO THIS: SEE PAGE(S):

Access the System Setup Menu..........................................................................................................32

Adjust screen contrast or backlighting..................................................................................................4

Change the displayed time...............................................................................................................12

Change the Map Page display...............................................................................................................20

Create and use a route......................................................................................................54

Find an address or intersection.........................................................................................................48-51

Find nearest cities or waypoints.....................................................................................14, 41-44

Initialize the GPS receiver (first time use)....................................................................................................16

Install batteries.........................................................................................................................1

Learn about the Map Page...................................................................................................................15-25

Learn how to operate the unit’s function keys.......................................................................................2-12

Load Map Data Cards.......................................................................................................................................1

Mark your present location as a waypoint........................................................................39

Pan using the map arrow..........................................................................................10, 18

Select a destination (Goto)....................................................................................................52

Turn the unit on or off......................................................................................................................3

Zoom in or out on the Map Page......................................................................................................10-16

viii

Introduction

StreetPilot Unit

LCD Display

4-level Grayscale Display

with Backlighting

(Map Page shown)

Compartment Door

Insert AA Batteries and optional

Map Data Cards here.

Antenna

Rotate upright for best

satellite reception

Keypad

Refer to Page 2 for

Key descriptions

Quick-Start

1

Battery/Map Card

Installation

Battery/Map Data Cartridge Installation

The StreetPilot operates on six (6) AA batteries, which are installed in the left end of the unit, as

viewed from the front. Alkaline, rechargeable NiCad, or Lithium batteries may be used. For extended

operation, use the cigarette lighter adapter to conserve batteries. The on-screen battery level indicator

may be calibrated for alkaline or NiCad batteries, but will not be totally accurate when using Lithium

batteries.

To install batteries and a map data card:

1. Lift up the metal D-ring at the end of the unit rotating ¼ turn anticlockwise to open the

compartment door.

2. Install the batteries (picture at right). It is very important to install ALL batteries with the proper

polarity, positive (+) and negative (-) orientation, as indicated by the markings molded into the

rubber base of the unit and inside the battery compartment door. Do not mix new batteries with

used batteries. Do not mix Alkaline with Lithium or NiCad rechargeable batteries.

3. If you are using an optional Map Data Card with detailed map data or if you plan to

transfer map data from a MapSource

®

CD-ROM, plug a blank card into the slot next to

the battery compartment, with the label facing toward the front of the StreetPilot (picture at right).

4. Close the battery compartment door and lock in place by turning the D-ring ¼ turn clockwise,

then return the ring to the flush position.

Battery life may vary due to a variety of factors, including ambient temperature and use of

backlighting. You may find that Lithium batteries provide longer life in colder conditions. Data is

retained in memory by an internal Lithium battery when the AA batteries are removed.

Refer to Appendix A for detailed information about MapSource

TM

CD-ROM’s and Data Cards.

Warning

Improper battery installation may cause

personal injury or property damage and/or

battery leakage.

Caution

Make certain the connector end of the Map

Data Card is inserted into the cartridge slot,

NOT the extractor handle end. Improper

installation can result in internal damage to

your StreetPilot Unit. When properly inserted,

the cartridge will protrude slightly from the slot

(not flush).

Compartment Door

Map Data

Card

AA Batteries

SECTION 2

2

Quick-Start

Keypad Usage

The POWER Key

Turns the unit on and off. A momentary press while the power is on activates the backlight/contrast

adjustment window. Press and hold to turn the StreetPilot off.

The PAGE Key

Changes between the main pages and returns the display from an option window back to a main page.

The QUIT Key

Returns the display to a previous page. When entering data, restores the previous value (cancels data entry).

The ENTER Key

Confirms a highlighted menu option. When entering data, it allows you to initiate entry, and then to

accept the selected value(s). It also marks the location of the panning arrow on the Map Page.

The ROCKER Keypad

Used to select (highlight) menu options and enter data. Also controls movement of cursor on the Map Page.

The Zoom OUT Key

Adjusts the map scale to show a larger area with less detail.

The Zoom IN Key

Adjusts the map scale to show a smaller area with more detail.

The FIND Key

Searches database for nearby Cities, Interstate Exits, and Personal Waypoints. If optional MetroGuide

®

Map Data is installed, it also searches for Points of Interest, Addresses, or Intersections. Allows listed

items to be viewed on a map or selected as a destination.

The Option Key

Displays a menu of available options for the current page. Press twice to display System Setup options.

The Route Key

Used to create a new route or edit an existing route. Also provides a selection to start or stop navigating a route.

The MARK Key

Captures your present location and saves it as a Personal Waypoint.

POWER Key

PAGE Key

QUIT Key

ENTER Key

FIND Key

IN Key

OPTION Key

ROUTE Key

MARK Key

OUT Key

ROCKER

Keypad

Quick-Start

3

Turning the Unit On and Off

Turning the StreetPilot On and Off

To turn the StreetPilot on:

1. Press and hold the red POWER key until the power tone sounds.

2. The Title Page will be displayed for a few seconds while the unit conducts a self-test (top right

picture).

3. If there is an optional Map Data Card installed in the StreetPilot, a page showing the

Mapping Region and the effective date is displayed on the screen (bottom right picture).

Press the ENTER key to acknowledge this page.

4. Once the self-test is complete, a warning page is displayed. Read the warning and press the

ENTER key to acknowledge it.

To turn the StreetPilot off:

Press and hold the red POWER key until the screen goes blank.

Title Page

Map Data Page

4

Quick-Start

Screen Brightness/Contrast

Adjusting Screen Brightness and Contrast

The StreetPilot screen lighting may set to a variety of levels for different lighting conditions and

personal preferences.

To adjust the screen brightness:

1. Press the POWER key for a moment. A window appears on the screen with a brightness control

and a Contrast control (picture at left).

2. Press the UP or DOWN areas of the ROCKER keypad to adjust the screen brighter or dimmer as

desired.

Contrast allows you to adjust the screen for optimum viewing in all lighting conditions. Moving

the control to the left causes the screen to appear more faint, while moving the control to the right

causes all areas of the screen (including pixels that are intended to be off) to appear darker. When

operating the StreetPilot at extreme temperatures, you may find that minor adjustments are needed to

obtain the best screen clarity.

To adjust the screen contrast:

1. Press the POWER key for a moment.

2. Press the UP or DOWN areas of the ROCKER keypad to adjust the screen contrast lighter or

darker as desired.

Screen Brightness/Contrast Adjustment

Additional Information

After adjusting the screen brightness or contrast, you may press the PAGE, QUIT, or ENTER key

to remove the screen adjustment window immediately.

Quick-Start

5

Dash Mounting and

External Power Connection

Your StreetPilot is designed to be portable, allowing you to easily transport the unit from vehicle

to vehicle or take it with you once you reach your destination. A Dash Mount Kit consisting of a

mounting bracket, mounting base, required hardware and adhesive pads is included in the StreetPilot

package. This provides a semi-permanent method of installing the unit at the best viewing location for

the driver or passenger(s). The dash mount bracket may be either permanently or temporarily

mounted using the included adhesive materials. Follow instructions for installing the mounting

bracket on the StreetPilot as explained in the instruction sheet provided with the Dash Mount Kit

which also includes specific instructions for installation of all kit components. General instructions are

included here for your convenience.

To install the cigarette lighter adapter, locate the connector on the rear of the StreetPilot unit

(behind the rubber weather cap). The connector is “keyed” with a notch located between two pins.

Mate the plug on the cigarette lighter adapter to this connector by aligning the notches and pushing

the plug into the connector until fully seated (picture at right). Use care when routing the adapter

cable being certain that it does not interfere with vehicle operation in any way.

Carefully choose the placement

of the base on the dash and

install using either the temporary

or permanent adhesive.

Slide the StreetPilot and

mounting bracket into the

base until it snaps into

place.

Slide the locking lever to the right to lock

the unit, preventing it from sliding off

the base.

To remove the unit from the base, slide the

lever to the left, depress

the release tab, slide the unit to

the right, and lift from the base.

Cigarette

Lighter

Adapter

Rubber

Weather

Cap

6

Quick-Start

Finding Your Location

The first time you use your StreetPilot to navigate, take it outside or properly mount it on the

dashboard of a vehicle in an open area with a clear view of the sky. Make certain the antenna is pointing

up. The StreetPilot also has the option of using a Simulator Mode which does not require reception of

GPS satellite signals. Refer to page 8.

When stationary, your Street Pilot should be able to calculate your position within five (5)

minutes after being turned on with a clear view of the sky.

The Global Positioning System (GPS) is a system of 24 satellites that circle the Earth twice a day

in a very precise orbit and transmit information to Earth. The StreetPilot must continuously receive

signals from at least three of these satellites to calculate your location and track your movement. At

times, additional satellites may be needed to determine your location.

Your GPS receiver can only receive signals from satellites which are above the horizon, so it

needs to know what satellites to look for at any given time. In order to determine which satellites are

above the horizon, your GPS needs to either be told its general location (“initialized”) or given the

opportunity to find itself. Once you initialize the unit to a location, it will typically compute a position

within a few minutes.

Initialization is only necessary under the following conditions:

! The first time you use your StreetPilot (new from the factory).

! After the StreetPilot has been moved more than 500 miles (with the power off) since the

last time you used it.

! If the StreetPilot’s memory has been cleared and all internally stored data has been lost.

Once the StreetPilot has calculated your location, you will have anywhere from three to 12

satellites in view. The receiver will then continuously select the best satellites in view to update your location.

Quick-Start

7

If the StreetPilot is unable to calculate your location after a few minutes:

1. A ‘Poor Satellite Reception’ box appears on the screen (top right picture).

2. If you are indoors, or would otherwise like to simulate GPS location and motion, use the

ROCKER keypad to highlight Start Simulator and press the ENTER key. The Simulator Mode

starts, and the StreetPilot returns to the page it was showing beforehand.

If the StreetPilot is brand new, or if the StreetPilot unit has been moved hundreds of miles since

the last time it tracked a GPS location, use the ROCKER keypad to highlight Set New

Location and press the ENTER key.

If neither of the above applies, and you would like the StreetPilot to continue looking for GPS

satellites, use the ROCKER keypad to highlight Continue Acquiring and press the ENTER key.

The StreetPilot will return to the page is was showing beforehand.

3. If you chose Set New Location, a new box appears asking what method you would like to use

for aiding the StreetPilot in determining your location.

4. If you know the general area of the continent where you are located, you can speed up the

calculation of your location by pointing to that area on a map. Use the ROCKER keypad to

highlight Use Map (top right picture) and press the ENTER key.

Otherwise, use the ROCKER keypad to select AutoLocate and press the ENTER key. The

StreetPilot will determine where you are located. This process is fully automatic and under

normal circumstances will calculate your position in 3-5 minutes when the unit has a good view

of the sky and is stationary.

Using the Map to Set Location

5. If you chose Use Map, a continental map is displayed with an arrow pointer on it (lower right

picture). Use the ROCKER keypad to move the arrow pointer to your approximate location and

press the ENTER key. Remember, you do not need to be exact. The StreetPilot only needs an idea

where you are within a few hundred miles.

Choosing ‘Use Map’

Finding Your Location

8

Quick-Start

You can start the Simulator Mode if you are indoors where the StreetPilot is unable to receive

signals from GPS satellites. It is useful to do this when planning a trip or finding cities, and (if using

MetroGuide Map Data) addresses, intersections, or businesses.

To start the Simulator Mode:

1. Press the OPTION key twice. The StreetPilot displays the System Setup menu. The ‘General’ file

tab should be displayed, and the cursor should be on the ‘Simulator’ field. If not, use the

ROCKER keypad to select the ‘Simulator’ field (see left picture).

2. Press the ENTER key and use the ROCKER keypad to select On (see left picture).

3. Press the ENTER key again to start the Simulator Mode.

4. Press the PAGE key or QUIT key to return to the page the StreetPilot was previously displaying.

Simulator “On” Selection

Using the Simulator

Quick-Start

9

Main Page Sequence

Road Sign Page (If Navigating)

Dashboard Page

Map Page

QUIT

PAGE

The StreetPilot features two main pages, the Map Page and the Dashboard Page. Press the

PAGE or QUIT key to switch back and forth between the two main pages.

If the StreetPilot is navigating to a destination, there is a third page called the Road Sign Page.

The diagram below shows the relationship between the main pages when this is the case. You could

say that the Road Sign Page is inserted “between” the Map Page and the Dashboard Page while

navigating to a destination.

10

Quick-Start

Map Zooming and Panning

Small Area - More Detail

Large Area - Less Detail

Once the StreetPilot calculates your location, you may find it enjoyable just to view the Map Page

and watch your movement along roads and streets. There will be time later to learn about the ‘Find’ and

‘Route’ functions.

If you are not already looking at the Map Page, press the PAGE key until the map is shown on

the screen (top left picture). If the StreetPilot is still trying to determine your position, there will be a

flashing question mark (?) in the center of the map . Otherwise, the StreetPilot is ready to follow as you

drive.

Now, take time to experiment with the Zoom IN and OUT keys. Notice that the further you

zoom in, the more map features that are shown, to the point where every street in the memory is

displayed. If you zoom out to some of the larger views of the map, it is possible to view most of a

continent at one time (bottom left picture). In addition, you can use the rocker keypad to pan from your

current location to other places on the map.

To change the map scale:

Press the IN key to see a smaller area with more detail.

Press the OUT key to see a larger area with less detail.

To pan the map:

1. Press the ROCKER keypad anywhere and an arrow appears. Use the ROCKER keypad to move

the arrow around the map, even to areas not currently shown on the map.

2. When you are finished panning, press the QUIT key. The panning arrow disappears.

Page is loading ...

Garmin StreetPilot Series StreetPilot Owner's manual

Garmin StreetPilot Series StreetPilot Owner's manual

Related papers

Other documents