Trendnet RB-TK-1603R User guide

RB-TK-1603R
Trendnet
Brand
Trendnet
Model
RB-TK-1603R
Category
KVM switches
Type
User guide

This manual is also suitable for

Command
Hot Keys
Description
Front Panel Button
TK-803R / TK-1603R KVM General Quick Reference Sheet
Select Computer
Next Higher
Computer Channel
Next Lower
Computer Channel
Stop Autoscan
Autoscan
Mouse/Keyboard
Reset Consele
Autoscan Beep
Sound On/Off
Autoscan with
Programmable
Delay Time
Restore to
Factory Defaults
Define Hot key
Sequence
(Default =
Scroll Lock +
Scroll Lock )
Select the desired computer
Select the next higher available
computer
Select the next lower available
computer
Autoscan through every connected
channel for quick screen browsing
of each channel
Autoscan through every connected
channel for quick screen browsing
of each channel in
(10-100 seconds)
Terminate autoscan activity
Terminate autoscan activity.
Toggle On/Off beep sound during
autoscan mode
Resets Mouse/Keyboard
Select the hot key preceding
sequence among 5 options
Press the push button for a
specific port to switch to that
computer
TK-803R
TK-1603R
(Y) = 1-digit port number (1~8)
(YZ) = 2-digit port number (01-16)
(Y) = Scroll Lock, Caps Lock, Esc, F12 or Num Lock
Press push button for
a specific port on the switch
Press push button for
a specific port on the switch
—
—
Press any button
Press and hold down button
4 for over 8 seconds, then
release the button and press
(Y) = Scroll Lock, Caps Lock,
Esc, F12 or Num Lock
Scroll Lock
Scroll Lock
Scroll Lock
Scroll Lock
Scroll Lock
Scroll Lock
Scroll Lock
Scroll Lock
Scroll Lock
Scroll Lock
+
+
+
+
+
(X) fx = 0 ~ 9
1 = 10 seconds
2 = 20 seconds
3 = 30 seconds
4 = 40 seconds
5 = 50 seconds
6 = 60 seconds
7 = 70 seconds
8 = 80 seconds
9 = 90 seconds
0 = 100 seconds
Scroll Lock Scroll Lock
++
Scroll Lock Scroll Lock
++
+
+
+
+
+
+
+
+
(Y)
S
H
S
(Y)
(Y)
(X)
(Z)
(Y)
Press any key on keyboard
Scroll Lock Scroll Lock
+
B
+
—
—
—
Scroll Lock Scroll Lock
+
END
+
Scroll Lock Scroll Lock
+
R
+
Note:
1. The hot key sequence denotes that you should hit the individual key
consecutively one at a time, not simultaneously.
2. After pressing the Scroll Lock key, you have 2 seconds to press the Scroll Lock key again. You then have another 2
seconds to press a command key. A beep confirms that the KVM switch is in “hot key” mode. If you do not press a
key within 2 seconds, the switch will exit hot key mode.
Scroll Lock
Scroll Lock
+
(Key)
+
  • Page 1 1

Trendnet RB-TK-1603R User guide

RB-TK-1603R
Trendnet
Brand
Trendnet
Model
RB-TK-1603R
Category
KVM switches
Type
User guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents