2. Fishbone Offroad
  3. 2.5" Leaf Spring Shim 5/16" Pin

Fishbone Offroad 2.5" Leaf Spring Shim 5/16" Pin, FB27369, FB27370, FB27371, FB27372 Installation guide

  • Hello! I've reviewed the installation instructions for the FISHBONE OFFROAD Shim Set FB27369, FB27370, FB27371, and FB27372. This document provides a step-by-step guide on how to install the shims on a vehicle's suspension. It specifies the required tools and clearly outlines the installation process, differentiating between springs over and under axles. Feel free to ask any specific questions you may have about using this document or about the installation of the shims.
  • What tools are required for installation?
    How many shims are included in the kit?
    How do I install shims for springs over axles?
    How do I install shims for springs under axles?
FB27369, FB27370, FB27371, & FB27372
Universal to Any 2.5” Spring
Shim Set
27369, FB27370, FB27371, FB2737200
REQUIRED TOOLS
Socket Set
Jack Stands
KIT CONTAINS
Shim
QTY
2
FB27369, FB27370, FB27371, & FB27372
Universal to Any 2.5” Spring
Shim Set
1 27369, FB27370, FB27371, FB2737200
1) LIFT & SUPPORT
Jack your vehicle so that your suspension has the
ability to droop. Support it with jack stands.
2) UNINSTALL
Remove the vehicle’s lower spring plate.
Remove the factory shim.
3) INSTALL
Install your new set of shims. For springs over axles,
the larger side will face the front of the vehicle. For
springs under axles, the larger face will point towards
the rear of the vehicle.
/