Esatto EBTDWS User manual

Version

V1.2 0223

Everything you need

for your Benchtop

Dishwsher is in

this User Mnul

Model/s

EBTDWW

EBTDWS

User Manual

Welcome

Congrtultions on purchsing your new Dishwsher.

The Estto brnd is proudly distributed within Austrli by

Residenti Group Pty Ltd.

Plese refer to the wrrnty crd t the rer of this mnul for

informtion regrding your product’s prts nd lbour wrrnty,

or visit us online t: www.residenti.group

At Residenti Group, we re customer obsessed nd our Support

Tem re there to ensure you get the most out of your pplince.

Should you wnt to lern more bout your new dishwsher, it's

fetures or importntly tking cre of the pplince, our Support

Tem re here to help.

You cn use our online Support Centre t nytime by visiting:

http://support.residentigroup.com.u

Or you cn contct us vi phone by diling: 1300 11 HELP (4357).

It is importnt tht you red through the following use nd cre

mnul thoroughly to fmilirise yourself with the instlltion

nd opertion requirements of your pplince to ensure the most

optimum performnce.

Agin, thnk you for choosing n Estto pplince nd we look

forwrd to being of service to you.

Kind Regrds,

The Residenti Tem

Residenti roup

—

Head Office

165 Brkly Avenue

Burnley, Victori

Austrli 3121

—

ACN

600 546 656

—

Online

residenti.group

www.estto.house

@estto.house

—

Postage

PO Box 5177

Burnley, Victori

Austrli 3121

—

Telephone

1300 11 4357

www.estto.house

esatto.house

Pge 04

Sfety Informtion

Pge 06

Product Overview

Pge 07

Quick Strt Guide

Pge 09

Instlltion

Instructions

Pge 14

Opertion

Instructions

Pge 16

Prepring 

Loding Dishes

Pge 22

Mintennce

 Clening

Pge 24

Troubleshooting

Tips

Pge 26

Error Codes

Pge 27

Technicl

Informtion

Contents

Pge 28

Wrrnty

Pge 31

Purchse Detils

User Manual

Sfety Informtion

When using your dishwsher, follow the precutions listed below:

SAFETY INFORMATION

• Instlltion nd repir cn only be crried out

by  qulied technicin

• This pplince is intended to be used in

household nd similr pplictions such s:

— st kitchen res in shops, oces nd

other working environments;

— frm houses;

— by clients in hotels, motels nd other

residentil type environments;

— bed nd brekfst type environments.

• This pplince cn be used by children

ged from 8 yers nd bove nd persons

with reduced physicl, sensory or mentl

cpbilities or lck of experience nd

knowledge if they hve been given supervision

or instruction concerning use of the pplince

in  sfe wy nd understnd the hzrds

involved.

• Children shll not ply with the pplince.

Clening nd user mintennce shll not be

done by children without supervision. (For

EN60335-1) This pplince is not intended

for use by persons (including children )

with reduced physicl, sensory ormentl

cpbilities, or lck of experience nd

knowledge, unless they hve been given

supervision or instruction concerning use of

the pplince by  person responsible for their

sfety. (For IEC60335-1 ) Pckging mteril

could be dngerous for children!

• This pplince is for indoor household use

only. To protect ginst the risk of electricl

shock, do not immerse the unit, cord or plug

in wter or other liquid. Plese unplug before

clening nd performing mintennce on the

pplince.

• Use  soft cloth moistened with mild sop, nd

then use  dry cloth to wipe it gin.

Disposal

For disposing of package and the

appliance please go to a recycling center.

Therefore cut off the power supply cable

and make the door closing device

unusable.

Cardboard packaging is manufactured from recycled

paper and should be disposed in the waste paper

collection for recycling.

By ensuring this product is disposed of correctly, you

will help prevent potential negative consequences

for the environment and human health, which could

otherwise be caused by inappropriate waste

handling of this product.

For more detailed information about recycling of this

product, please contact your local city office and

your household waste disposal service.

DISPOSAL: Do not dispose this product as

unsorted municipal waste. Collection of such

waste separately for special treatment is

necessary.

DISPOSAL

• For disposing of pckge nd the pplince

plese go to  recycling center. Therefore cut

o the power supply cble nd mke the door

closing device unusble.

• Crdbord pckging is mnufctured from

recycled pper nd should be disposed in the

wste pper collection for recycling.

• By ensuring this product is disposed of

correctly, you will help prevent potentil

negtive consequences for the environment

nd humn helth, which could otherwise be

cused by inpproprite wste hndling of

this product.

• For more detiled informtion bout recycling

of this product, plese contct your locl city

oce nd your household wste disposl

service.

• DISPOSAL: Do not dispose this product s

unsorted municipl wste. Collection of such

wste seprtely for specil tretment is

necessry.

esatto.house

EARTHING INSTRUCTIONS

• This pplince must be erthed. In the event

of  mlfunction or brekdown, erthing

will reduce the risk of n electric shock by

providing  pth of lest resistnce of electric

current. This pplince is equipped with n

erthing conductor plug.

• The plug must be plugged into n pproprite

outlet tht is instlled nd erthed in

ccordnce with ll locl codes nd

ordinnces.

• Improper connection of the equipment-

erthing conductor cn result in the risk of

n electric shock. Check with  qulied

electricin or service representtive if you re

in doubt whether the pplince is properly

grounded.

• Do not modify the plug provided with the

pplince; If it does not t the outlet.

• Hve  proper outlet instlled by  qulied

electricin.

• Do not buse, sit on, or stnd on the door or

dish rck of the dishwsher.

• Do not operte your dishwsher unless ll

enclosure pnels re properly in plce.

• Open the door very crefully if the dishwsher

is operting, there is  risk of wter squirting

out.

• Do not plce ny hevy objects on or stnd on

the door when it is open. The pplince could

tip forwrd.

• When loding items to be wshed:

1. Locte shrp items so tht they re not

likely to dmge the door sel;

2. Wrning: Knives nd other utensils with

shrp points must be loded in the bsket

with their points fcing down or plced in 

horizontl position.

Sfety Informtion

When using your dishwsher, follow the precutions listed below:

• Some dishwsher detergents re strongly

lkline. They cn be extremely dngerous

if swllowed. Avoid contct with the skin

nd eyes nd keep children wy from the

dishwsher when the door is open.

• Check tht the detergent powder is empty

fter completion of the wsh cycle.

• Do not wsh plstic items unless they re

mrked “dishwsher sfe” or the equivlent.

• For unmrked plstic items not so mrked,

check the mnufcturer's recommendtions.

• Use only detergent nd rinse gents

recommended for use in n utomtic

dishwsher.

• Never use sop, lundry detergent, or hnd

wshing detergent in your dishwsher.

• The door should not be left open, since this

could increse the risk of tripping. If the supply

cord is dmged, it must be replced by the

mnufcturer or its service gent or  similrly

qulied person in order to void  hzrd.

• During instlltion, the power supply must

not be excessively or dngerously bent or

ttened.

• Do not tmper with controls.

• The pplince needs to be connected to the

min wter vlve using new hose sets. Old sets

should not be reused.

• To sve energy, in stnd by mode , the

pplince will switch o utomticlly while

there is no ny opertion in 30 minutes .

User Manual

Product Overview

PRODUCT OVERVIEW

To get the best performance from your dishwasher, read all operating instructions

before using it for the first time.

IMPORTANT:

Pictures are only for reference, different models may be different.

Please prevail in kind.

NOTE:

Filter assembly

Spray arm

Dispenser

Cutlery rack

Basket

Cup rack

IMPORTANT:

To get the best performnce from your

dishwsher, red ll operting instructions

before using it for the rst time.

NOTE:

Pictures within this user mnul re for

instructionl purposes only, your pplince my

pper dierently.

PRODUCT OVERVIEW

To get the best performance from your dishwasher, read all operating instructions

before using it for the first time.

IMPORTANT:

Pictures are only for reference, different models may be different.

Please prevail in kind.

NOTE:

Filter assembly

Spray arm

Dispenser

Cutlery rack

Basket

Cup rack

PRODUCT OVERVIEW

To get the best performance from your dishwasher, read all operating instructions

before using it for the first time.

IMPORTANT:

Pictures are only for reference, different models may be different.

Please prevail in kind.

NOTE:

Filter assembly

Spray arm

Dispenser

Cutlery rack

Basket

Cup rack

Dispenser

Cup Rck Cup Rck

Bsket Cutlery Rck

Spry Arm

Filter Assembly

esatto.house

Quick Strt Guide

For more detils on opertion, plese red the relevnt content in this mnul.

QUICK USER GUIDE

Please read the corresponding content on the instruction manual for detailed

operating method.

2Removing the larger residue on the

cutlery

3Loading the baskets

4Filling the dispenser Selecting a program and running

the dishwasher

Inside Outside

1Install the dishwasher

(Please check the section 5 “INSTALLATION INSTRUCTION ”

of PART Ⅰ: Generic Version.)

 Instll the dishwsher (plese check pge 09)

QUICK USER GUIDE

Please read the corresponding content on the instruction manual for detailed

operating method.

2Removing the larger residue on the

cutlery

3Loading the baskets

4Filling the dispenser Selecting a program and running

the dishwasher

Inside Outside

1Install the dishwasher

(Please check the section 5 “INSTALLATION INSTRUCTION ”

of PART Ⅰ: Generic Version.)

QUICK USER GUIDE

Please read the corresponding content on the instruction manual for detailed

operating method.

2Removing the larger residue on the

cutlery

3Loading the baskets

4Filling the dispenser Selecting a program and running

the dishwasher

Inside Outside

1Install the dishwasher

(Please check the section 5 “INSTALLATION INSTRUCTION ”

of PART Ⅰ: Generic Version.)

 Fill the dispenser  Select  progrm nd strt

running the dishwsher

QUICK USER GUIDE

Please read the corresponding content on the instruction manual for detailed

operating method.

2Removing the larger residue on the

cutlery

3Loading the baskets

4Filling the dispenser Selecting a program and running

the dishwasher

Inside Outside

1Install the dishwasher

(Please check the section 5 “INSTALLATION INSTRUCTION ”

of PART Ⅰ: Generic Version.)

QUICK USER GUIDE

Please read the corresponding content on the instruction manual for detailed

operating method.

2Removing the larger residue on the

cutlery

3Loading the baskets

4Filling the dispenser Selecting a program and running

the dishwasher

Inside Outside

1Install the dishwasher

(Please check the section 5 “INSTALLATION INSTRUCTION ”

of PART Ⅰ: Generic Version.)

 Remove lrger residue from

the cutlery

 Lod the bskets crefully

User Manual

This pge is intentionlly blnk

But if you wnt to drw something, mke notes or even write

 recipe... it’s ll yours!

esatto.house

Water Supply And Drain

Cold water connection

Connect the cold water supply hose to

a threaded 3/4(inch) connector and

make sure that it is fastened tightly in

place.

If the water pipes are new or have not

been used for an extended period of

time, let the water run to make sure

that the water is clear. This precaution

is needed to avoid the risk of the

water inlet to be blocked and damage

the appliance.

ordinary supply hose

WARNING

A hose that attaches to a sink spray can burst if it is installed on the same

water line as the dishwasher. If your sink has one, it is recommended that

the hose be disconnected and the hole plugged.

WARNING :

Electricl Shock Hzrd

Disconnect electricl power before instlling

dishwsher. Filure to do so could result in

deth or electricl shock.

INSTALLATION INSTRUCTION

Ensure the voltage and frequency of the power being corresponds to those on the

rating plate. Only insert the plug into an electrical socket which is earthed

properly. If the electrical socket to which the appliance must be connected is not

appropriate for the plug, replace the socket, rather than using a adaptors or the like as

they could cause overheating and burns.

Electrical requirements

Electrical connection

Ensure that proper earthing exists before use

About Power Connection

WARNING

For personal safety:

Do not use an extension cord or an adapter

plug with this appliance.

Do not, under any circumstances, cut or remove

the earthing connection from the power cord.

The installation of the pipes and electrical equipments should be done by professionals.

Attention

WARNING

Electrical Shock Hazard

Disconnect electrical power before

installing dishwasher.

Failure to do so could result in death or

electrical shock.

Please look at the rating label to know the rating voltage and connect the dishwasher

to the appropriate power supply. Use the required fuse 10A/13A/16A, time delay fuse

or circuit breaker recommended and provide separate circuit serving only this appliance.

WARNING :

• Do not use n extension cord or n dpter

plug with this pplince.

• Do not, under ny circumstnces, cut or

remove the erthing connection from the

power cord.

INSTALLATION INSTRUCTION

Ensure the voltage and frequency of the power being corresponds to those on the

rating plate. Only insert the plug into an electrical socket which is earthed

properly. If the electrical socket to which the appliance must be connected is not

appropriate for the plug, replace the socket, rather than using a adaptors or the like as

they could cause overheating and burns.

Electrical requirements

Electrical connection

Ensure that proper earthing exists before use

About Power Connection

WARNING

For personal safety:

Do not use an extension cord or an adapter

plug with this appliance.

Do not, under any circumstances, cut or remove

the earthing connection from the power cord.

The installation of the pipes and electrical equipments should be done by professionals.

Attention

WARNING

Electrical Shock Hazard

Disconnect electrical power before

installing dishwasher.

Failure to do so could result in death or

electrical shock.

Please look at the rating label to know the rating voltage and connect the dishwasher

to the appropriate power supply. Use the required fuse 10A/13A/16A, time delay fuse

or circuit breaker recommended and provide separate circuit serving only this appliance.

INSTALLATION INSTRUCTION

Ensure the voltage and frequency of the power being corresponds to those on the

rating plate. Only insert the plug into an electrical socket which is earthed

properly. If the electrical socket to which the appliance must be connected is not

appropriate for the plug, replace the socket, rather than using a adaptors or the like as

they could cause overheating and burns.

Electrical requirements

Electrical connection

Ensure that proper earthing exists before use

About Power Connection

WARNING

For personal safety:

Do not use an extension cord or an adapter

plug with this appliance.

Do not, under any circumstances, cut or remove

the earthing connection from the power cord.

The installation of the pipes and electrical equipments should be done by professionals.

Attention

WARNING

Electrical Shock Hazard

Disconnect electrical power before

installing dishwasher.

Failure to do so could result in death or

electrical shock.

Please look at the rating label to know the rating voltage and connect the dishwasher

to the appropriate power supply. Use the required fuse 10A/13A/16A, time delay fuse

or circuit breaker recommended and provide separate circuit serving only this appliance.

Electricl Requirements

Plese look t the rting lbel to know the rting

voltge nd connect the dishwsher to the

pproprite power supply. Use the required fuse

10A/13A/16A, time dely fuse or circuit breker

recommended nd provide seprte circuit

serving only this pplince.

Electricl Connection

Ensure the voltge nd frequency of the power

being corresponds to those on the rting plte.

Only insert the plug into n electricl socket

which is erthed properly. If the electricl socket

to which the pplince must be connected is

not pproprite for the plug, replce the socket,

rther thn using dptors or the like s they

could cuse overheting nd burns.

Cold Wter Connection

Plese look t the rting lbel to know the rting

voltge nd connect the dishwsher to the

pproprite power supply. Use the required fuse

10A/13A/16A, time dely fuse or circuit breker

recommended nd provide seprte circuit

serving only this pplince.

WARNING :

A hose tht ttches to  sink spry cn

burst if it is instlled on the sme wter line

s the dishwsher. If your sink hs one, it is

recommended tht the hose be disconnected

nd the hole plugged.

Attention: The instlltion of the pipes nd

electricl equipments should be

done by professionls.

PRODUCT OVERVIEW

To get the best performance from your dishwasher, read all operating instructions

before using it for the first time.

IMPORTANT:

Pictures are only for reference, different models may be different.

Please prevail in kind.

NOTE:

Filter assembly

Spray arm

Dispenser

Cutlery rack

Basket

Cup rack

INSTALLATION INSTRUCTION

Ensure the voltage and frequency of the power being corresponds to those on the

rating plate. Only insert the plug into an electrical socket which is earthed

properly. If the electrical socket to which the appliance must be connected is not

appropriate for the plug, replace the socket, rather than using a adaptors or the like as

they could cause overheating and burns.

Electrical requirements

Electrical connection

Ensure that proper earthing exists before use

About Power Connection

WARNING

For personal safety:

Do not use an extension cord or an adapter

plug with this appliance.

Do not, under any circumstances, cut or remove

the earthing connection from the power cord.

The installation of the pipes and electrical equipments should be done by professionals.

Attention

WARNING

Electrical Shock Hazard

Disconnect electrical power before

installing dishwasher.

Failure to do so could result in death or

electrical shock.

Please look at the rating label to know the rating voltage and connect the dishwasher

to the appropriate power supply. Use the required fuse 10A/13A/16A, time delay fuse

or circuit breaker recommended and provide separate circuit serving only this appliance.

Ensure there is proper erthing before use

Ordinry Supply Hose

Instlltion Instructions

Power Connection, Wter Supply  Drining

User Manual

Connection Of Drain Hoses

Please securely fix the drain hose in either position A or position B

Insert the drain hose into a drain pipe with a minimum diameter of 4 cm, or let it run

into the sink, making sure to avoid bending or crimping it. The height of drain pipe

must be less than 600mm. The free end of the hose must not be immersed in water

to avoid the back flow of it.

MAX 600mm

Counter

Drain pipe

Back of dishwasher

Inlet pipe connector

Drain pipe

Mains Cable

Bck of Dishwsher

Drin Pipe

Ø 40mm

MAX 600mm

Counter

Inlet Pipe Connector

Drin Pipe

Mins Cble

Instlltion Instructions

Wter Supply  Drining

esatto.house

Wter Outlet

Connect the wter drin hose. The drin hose

must be correctly tted to void wter leks.

Ensure tht the wter drin hose is not kinked or

squshed.

Extension Hose

If you need  drin hose extension, mke sure to

use  similr drin hose. It must be no longer thn

4 meters; otherwise the clensing eect of the

dishwsher could be reduced.

Connection

The wste connection must be t  height less

thn 100 cm (mximum) from the bottom of the

dish. The wter drin hose should be xed.

Position the Applince

Crefully position the pplince in the desired

loction. The bck should rest ginst the wll

behind it, nd the sides, long the djcent

cbinets or wlls. The dishwsher is equipped

with wter supply nd drin hoses tht cn be

positioned either to the right or the left sides to

fcilitte proper instlltion.

Connection Of Drin Hoses

Insert the drin hose into  drin pipe with 

minimum dimeter of 4 cm, or let it run into the

sink, mking sure to void bending or crimping

it. The height of drin pipe must be less thn

600mm. The free end of the hose must not be

immersed in wter to void the bck ow of it.

How to Drin Excess Wter From Hoses

If the sink is 1000 higher from the oor, the excess

wter in hoses cnnot be drined directly into the

sink. It will be necessry to drin excess wter

from hoses into  bowl or suitble continer tht

is held outside nd lower thn the sink.

INSTALLATION INSTRUCTION

Ensure the voltage and frequency of the power being corresponds to those on the

rating plate. Only insert the plug into an electrical socket which is earthed

properly. If the electrical socket to which the appliance must be connected is not

appropriate for the plug, replace the socket, rather than using a adaptors or the like as

they could cause overheating and burns.

Electrical requirements

Electrical connection

Ensure that proper earthing exists before use

About Power Connection

WARNING

For personal safety:

Do not use an extension cord or an adapter

plug with this appliance.

Do not, under any circumstances, cut or remove

the earthing connection from the power cord.

The installation of the pipes and electrical equipments should be done by professionals.

Attention

WARNING

Electrical Shock Hazard

Disconnect electrical power before

installing dishwasher.

Failure to do so could result in death or

electrical shock.

Please look at the rating label to know the rating voltage and connect the dishwasher

to the appropriate power supply. Use the required fuse 10A/13A/16A, time delay fuse

or circuit breaker recommended and provide separate circuit serving only this appliance.

Attention :

Plese securely x the drin hose

in either position:

A or B

* *

INSTALLATION INSTRUCTION

Ensure the voltage and frequency of the power being corresponds to those on the

rating plate. Only insert the plug into an electrical socket which is earthed

properly. If the electrical socket to which the appliance must be connected is not

appropriate for the plug, replace the socket, rather than using a adaptors or the like as

they could cause overheating and burns.

Electrical requirements

Electrical connection

Ensure that proper earthing exists before use

About Power Connection

WARNING

For personal safety:

Do not use an extension cord or an adapter

plug with this appliance.

Do not, under any circumstances, cut or remove

the earthing connection from the power cord.

The installation of the pipes and electrical equipments should be done by professionals.

Attention

WARNING

Electrical Shock Hazard

Disconnect electrical power before

installing dishwasher.

Failure to do so could result in death or

electrical shock.

Please look at the rating label to know the rating voltage and connect the dishwasher

to the appropriate power supply. Use the required fuse 10A/13A/16A, time delay fuse

or circuit breaker recommended and provide separate circuit serving only this appliance.

Attention :

See pge 27 for technicl informtion

Instlltion Instructions

Wter Supply  Drining

User Manual

USING YOUR DISHWASHER

Control Panel

面板类型1

Operation (Button)

Power

Delay

Program

Press this button to turn on your dishwasher, the screen lights up.

Press the button to set the delay time.

Press this button to select the appropriate washing program, the

selected program indicator will be lit.

To start the selected washing program or pause it when the

dishwasher is working.

4Start / Pause

2 7

8 4

Display

RRiinnssee AAiidd

If the “ ” indicator is lit, it means the dishwasher is low

on dishwasher rinse aid and requires a refill.

5Warning

indicator

WWaatteerr FFaauucceett

If the “ ” indicator is lit, it means the water faucet closed.

 Power Press this button to turn on your dishwsher, the screen lights up.

 Dely Press the button to set up the dely time feture.

 Progrm Press this button to select the pproprite wshing progrm, the

selected progrm indictor will be lit.

 Strt / Puse To strt the selected wshing progrm or puse it when while the

dishwsher is mid-opertion.

Opertion (Buttons)







   

 

Opertion Instructions

Button Interfce

esatto.house

 Wrning

Indictors

Rinse Aid

If the “ ” indictor is lit, the dishwsher is low on rinse id

nd requires  rell.

Wter Fucet

If the “ ” indictor is lit, it mens the wter fucet closed.

 Progress

Indictor When the progrm hs ended, the “ ” indictor will be lit.

 Dely Time To show the dely time. (2h/4h/6h/8h)

 Progrm

Indictors

Intensive 70° C

For heviest soiled crockery, such s pots, pns, csserole

dishes nd dishes tht hve been sitting with dried food on

them for  while.

Hevy

For hevily soiled lods, such s pots, pltes, glsses nd

lightly soiled pns.

ECO 50° C

For normlly soiled lods, such s pots, pltes, glsses nd

lightly soiled pns. stndrd dily cycle.

Glss

For lightly soiled lods, such s glsswre, crystl or ne

chin pieces.

Super '90

For lightly soiled crockery nd glss.

Quick 30'

A shorter wsh for lightly soiled lods nd quick wsh.

(Does not include  drying stge).

Disply

Opertion Instructions

Disply Interfce

User Manual

Progrm

Title

Description

of Cycle

Detergent

Pre/Min

Running

Time (min)

Energy

(kWh)

Wter

(L)

Rinse-Aid

Required

Intensive 70° C

Pre-wsh (50˚C)

Wsh (55˚C)

Rinse × 

Rinse (70˚C)

Drying

5/17.5g

(1 or 2 pieces) 140 0.85 9.7 

Hevy

Pre-wsh

Wsh (60˚C)

Rinse

Rinse (70˚C)

Drying

5/17.5g

(1 or 2 pieces) 120 0.65 7.8 

ECO 50° C

(*AS/NZS 2007.1)

Pre-wsh

Wsh (47˚C)

Rinse

Rinse (50˚C)

Drying

5/17.5g

(1 piece) 135 0.45 7.4 

Glss

Wsh (45˚C)

Rinse

Rinse (50˚C)

Drying

22.5g

(1 piece) 70 0.45 6

Super 90'

Wsh (65˚C)

Rinse (70˚C)

Drying

22.5g

(1 piece) 90 0.65 7

Quick 30'

Wsh (40˚C)

Rinse

15g 30 0.32 5.8 

Opertion Instructions

Progrmming the Dishwsher

WASH CYCLE TABLE:

The tble below shows which progrms re best for the levels of food residue on

them nd how much detergent is needed. It lso show vrious informtion bout

the progrms.

(  or  ) refers to whether or not you need to ll the Rinse-Aid Dispenser.

INSTALLATION INSTRUCTION

Ensure the voltage and frequency of the power being corresponds to those on the

rating plate. Only insert the plug into an electrical socket which is earthed

properly. If the electrical socket to which the appliance must be connected is not

appropriate for the plug, replace the socket, rather than using a adaptors or the like as

they could cause overheating and burns.

Electrical requirements

Electrical connection

Ensure that proper earthing exists before use

About Power Connection

WARNING

For personal safety:

Do not use an extension cord or an adapter

plug with this appliance.

Do not, under any circumstances, cut or remove

the earthing connection from the power cord.

The installation of the pipes and electrical equipments should be done by professionals.

Attention

WARNING

Electrical Shock Hazard

Disconnect electrical power before

installing dishwasher.

Failure to do so could result in death or

electrical shock.

Please look at the rating label to know the rating voltage and connect the dishwasher

to the appropriate power supply. Use the required fuse 10A/13A/16A, time delay fuse

or circuit breaker recommended and provide separate circuit serving only this appliance.

Note :

AS/NZS 2007.1: This progrm is

the test cycle. The informtion for

comprbility test in ccordnce

with AS/NZS 2007.1.

esatto.house

Opertion Instructions

Progrmming the Dishwsher

INSTALLATION INSTRUCTION

Ensure the voltage and frequency of the power being corresponds to those on the

rating plate. Only insert the plug into an electrical socket which is earthed

properly. If the electrical socket to which the appliance must be connected is not

appropriate for the plug, replace the socket, rather than using a adaptors or the like as

they could cause overheating and burns.

Electrical requirements

Electrical connection

Ensure that proper earthing exists before use

About Power Connection

WARNING

For personal safety:

Do not use an extension cord or an adapter

plug with this appliance.

Do not, under any circumstances, cut or remove

the earthing connection from the power cord.

The installation of the pipes and electrical equipments should be done by professionals.

Attention

WARNING

Electrical Shock Hazard

Disconnect electrical power before

installing dishwasher.

Failure to do so could result in death or

electrical shock.

Please look at the rating label to know the rating voltage and connect the dishwasher

to the appropriate power supply. Use the required fuse 10A/13A/16A, time delay fuse

or circuit breaker recommended and provide separate circuit serving only this appliance.

WARNING :

It is dngerous to open the door mid-cycle,

s hot stem my scld you.

STARTING A CYCLE WASH:

 Drw out the lower nd upper bsket, lod the dishes

nd push them bck. It is commended to lod the

lower bsket rst, then the upper one.

 Pour in the detergent.

 Insert the plug into the socket. The power supply refer

to lst pge “Technicl Informtion”. Mke sure tht

the wter supply is turned on to full pressure.

 Close the door, press the Power button, to switch on

the mchine.

 Choose  progrm, the response light will turn on.

Then press the Strt/Puse button, the dishwsher will

strt its cycle.

CHANGING THE PROGRAM MIDCYCLE

A wsh cycle cn only be chnged if it hs been running

for  short time otherwise, the detergent my hve

lredy been relesed nd the dishwsher my hve

lredy drined the wsh wter. If this is the cse, the

dishwsher needs to be reset nd the detergent dispenser

must be relled. To reset the dishwsher, plese follow the

instructions below:

 Press the Strt/Puse button to puse the wshing.

 Press Progrm button for more thn 3 seconds - the

progrm will cncel.

 Press the Progrm button to select the desired

progrm.

 Press the Strt/Puse button, fter 10 seconds, the

dishwsher will strt.

FORGET TO ADD A DISH?:

A forgotten dish cn be dded ny time before the

detergent dispenser opens.

If this is the cse, follow these steps::

 Press the Strt/Puse button to puse the wshing.

 Wit 5 seconds; then open the door.

 Add the forgotten dishes.

 Close the door.

 Press the Strt/Puse button fter 10 seconds, the

dishwsher will strt.

Starting A Cycle Wash

1. Draw out the lower and upper basket, load the dishes and push them back.

It is commended to load the lower basket first, then the upper one.

2. Pour in the detergent.

3. Insert the plug into the socket. The power supply refer to last page ”Product fiche”.

Make sure that the water supply is turned on to full pressure.

4. Close the door, press the Power button, to switch on the machine.

5. Choose a program, the response light will turn on. Then press the Start/Pause

button, the dishwasher will start its cycle.

Changing The Program Mid-cycle

A wash cycle can only be changed if it has been running for a short time otherwise,

the detergent may have already been released and the dishwasher may have already

drained the wash water. If this is the case, the dishwasher needs to be reset and the

detergent dispenser must be refilled. To reset the dishwasher, follow the

instructions below:

1. Press the Start/Pause button to pause the washing.

2. Press Program button for more than 3 seconds - the program will cancel.

3. Press the Program button to select the desired program.

4. Press the Start/Pause button, after 10 seconds, the dishwasher will start.

3 sec

AS/NZS 2007.1 This program is the test cycle. The information for comparability

test in accordance with AS/NZS 2007.1.

NOTE:

Starting A Cycle Wash

1. Draw out the lower and upper basket, load the dishes and push them back.

It is commended to load the lower basket first, then the upper one.

2. Pour in the detergent.

3. Insert the plug into the socket. The power supply refer to last page ”Product fiche”.

Make sure that the water supply is turned on to full pressure.

4. Close the door, press the Power button, to switch on the machine.

5. Choose a program, the response light will turn on. Then press the Start/Pause

button, the dishwasher will start its cycle.

Changing The Program Mid-cycle

A wash cycle can only be changed if it has been running for a short time otherwise,

the detergent may have already been released and the dishwasher may have already

drained the wash water. If this is the case, the dishwasher needs to be reset and the

detergent dispenser must be refilled. To reset the dishwasher, follow the

instructions below:

1. Press the Start/Pause button to pause the washing.

2. Press Program button for more than 3 seconds - the program will cancel.

3. Press the Program button to select the desired program.

4. Press the Start/Pause button, after 10 seconds, the dishwasher will start.

3 sec

AS/NZS 2007.1 This program is the test cycle. The information for comparability

test in accordance with AS/NZS 2007.1.

NOTE:

Starting A Cycle Wash

1. Draw out the lower and upper basket, load the dishes and push them back.

It is commended to load the lower basket first, then the upper one.

2. Pour in the detergent.

3. Insert the plug into the socket. The power supply refer to last page ”Product fiche”.

Make sure that the water supply is turned on to full pressure.

4. Close the door, press the Power button, to switch on the machine.

5. Choose a program, the response light will turn on. Then press the Start/Pause

button, the dishwasher will start its cycle.

Changing The Program Mid-cycle

A wash cycle can only be changed if it has been running for a short time otherwise,

the detergent may have already been released and the dishwasher may have already

drained the wash water. If this is the case, the dishwasher needs to be reset and the

detergent dispenser must be refilled. To reset the dishwasher, follow the

instructions below:

1. Press the Start/Pause button to pause the washing.

2. Press Program button for more than 3 seconds - the program will cancel.

3. Press the Program button to select the desired program.

4. Press the Start/Pause button, after 10 seconds, the dishwasher will start.

3 sec

AS/NZS 2007.1 This program is the test cycle. The information for comparability

test in accordance with AS/NZS 2007.1.

NOTE:

Starting A Cycle Wash

1. Draw out the lower and upper basket, load the dishes and push them back.

It is commended to load the lower basket first, then the upper one.

2. Pour in the detergent.

3. Insert the plug into the socket. The power supply refer to last page ”Product fiche”.

Make sure that the water supply is turned on to full pressure.

4. Close the door, press the Power button, to switch on the machine.

5. Choose a program, the response light will turn on. Then press the Start/Pause

button, the dishwasher will start its cycle.

Changing The Program Mid-cycle

A wash cycle can only be changed if it has been running for a short time otherwise,

the detergent may have already been released and the dishwasher may have already

drained the wash water. If this is the case, the dishwasher needs to be reset and the

detergent dispenser must be refilled. To reset the dishwasher, follow the

instructions below:

1. Press the Start/Pause button to pause the washing.

2. Press Program button for more than 3 seconds - the program will cancel.

3. Press the Program button to select the desired program.

4. Press the Start/Pause button, after 10 seconds, the dishwasher will start.

3 sec

AS/NZS 2007.1 This program is the test cycle. The information for comparability

test in accordance with AS/NZS 2007.1.

NOTE:

Starting A Cycle Wash

1. Draw out the lower and upper basket, load the dishes and push them back.

It is commended to load the lower basket first, then the upper one.

2. Pour in the detergent.

3. Insert the plug into the socket. The power supply refer to last page ”Product fiche”.

Make sure that the water supply is turned on to full pressure.

4. Close the door, press the Power button, to switch on the machine.

5. Choose a program, the response light will turn on. Then press the Start/Pause

button, the dishwasher will start its cycle.

Changing The Program Mid-cycle

A wash cycle can only be changed if it has been running for a short time otherwise,

the detergent may have already been released and the dishwasher may have already

drained the wash water. If this is the case, the dishwasher needs to be reset and the

detergent dispenser must be refilled. To reset the dishwasher, follow the

instructions below:

1. Press the Start/Pause button to pause the washing.

2. Press Program button for more than 3 seconds - the program will cancel.

3. Press the Program button to select the desired program.

4. Press the Start/Pause button, after 10 seconds, the dishwasher will start.

3 sec

AS/NZS 2007.1 This program is the test cycle. The information for comparability

test in accordance with AS/NZS 2007.1.

NOTE:

Starting A Cycle Wash

1. Draw out the lower and upper basket, load the dishes and push them back.

It is commended to load the lower basket first, then the upper one.

2. Pour in the detergent.

3. Insert the plug into the socket. The power supply refer to last page ”Product fiche”.

Make sure that the water supply is turned on to full pressure.

4. Close the door, press the Power button, to switch on the machine.

5. Choose a program, the response light will turn on. Then press the Start/Pause

button, the dishwasher will start its cycle.

Changing The Program Mid-cycle

A wash cycle can only be changed if it has been running for a short time otherwise,

the detergent may have already been released and the dishwasher may have already

drained the wash water. If this is the case, the dishwasher needs to be reset and the

detergent dispenser must be refilled. To reset the dishwasher, follow the

instructions below:

1. Press the Start/Pause button to pause the washing.

2. Press Program button for more than 3 seconds - the program will cancel.

3. Press the Program button to select the desired program.

4. Press the Start/Pause button, after 10 seconds, the dishwasher will start.

3 sec

AS/NZS 2007.1 This program is the test cycle. The information for comparability

test in accordance with AS/NZS 2007.1.

NOTE:

Starting A Cycle Wash

1. Draw out the lower and upper basket, load the dishes and push them back.

It is commended to load the lower basket first, then the upper one.

2. Pour in the detergent.

3. Insert the plug into the socket. The power supply refer to last page ”Product fiche”.

Make sure that the water supply is turned on to full pressure.

4. Close the door, press the Power button, to switch on the machine.

5. Choose a program, the response light will turn on. Then press the Start/Pause

button, the dishwasher will start its cycle.

Changing The Program Mid-cycle

A wash cycle can only be changed if it has been running for a short time otherwise,

the detergent may have already been released and the dishwasher may have already

drained the wash water. If this is the case, the dishwasher needs to be reset and the

detergent dispenser must be refilled. To reset the dishwasher, follow the

instructions below:

1. Press the Start/Pause button to pause the washing.

2. Press Program button for more than 3 seconds - the program will cancel.

3. Press the Program button to select the desired program.

4. Press the Start/Pause button, after 10 seconds, the dishwasher will start.

3 sec

AS/NZS 2007.1 This program is the test cycle. The information for comparability

test in accordance with AS/NZS 2007.1.

NOTE:

User Manual

1.Basket:

2.Cutlery basket:

LOADING THE BASKETS

ACCORDING TO AS/NZS 2007.1:

Cups

Saucers

Glasses

Dessert dishes

Dinner plates

Soup plates

Cutlery basket

Item

Number

Soup spoons

Forks

Knives

Teaspoons

Dessert spoons

Item

Number

1515231

235

4 4

Information for comparability tests in

accordance with (*AS/NZS 2007.1 )

Capacity: 6 place settings

Program: ECO

Rinse aid setting: 6

Detergent(Pre/main): 5/17.5g

Door is open at the end of the drying

cycle for the drying performance test

(Door position: Open 50 mm)

1 32 444 5

Prepring  Loding Dishes

Loding the Bskets According to AUS/NZ S 2007.1

1.Basket:

2.Cutlery basket:

LOADING THE BASKETS

ACCORDING TO AS/NZS 2007.1:

Cups

Saucers

Glasses

Dessert dishes

Dinner plates

Soup plates

Cutlery basket

Item

Number

Soup spoons

Forks

Knives

Teaspoons

Dessert spoons

Item

Number

1515231

235

4 4

Information for comparability tests in

accordance with (*AS/NZS 2007.1 )

Capacity: 6 place settings

Program: ECO

Rinse aid setting: 6

Detergent(Pre/main): 5/17.5g

Door is open at the end of the drying

cycle for the drying performance test

(Door position: Open 50 mm)

1 32 444 5

1. Bsket:















1.Basket:

2.Cutlery basket:

LOADING THE BASKETS

ACCORDING TO AS/NZS 2007.1:

Cups

Saucers

Glasses

Dessert dishes

Dinner plates

Soup plates

Cutlery basket

Item

Number

Soup spoons

Forks

Knives

Teaspoons

Dessert spoons

Item

Number

1515231

235

4 4

Information for comparability tests in

accordance with (*AS/NZS 2007.1 )

Capacity: 6 place settings

Program: ECO

Rinse aid setting: 6

Detergent(Pre/main): 5/17.5g

Door is open at the end of the drying

cycle for the drying performance test

(Door position: Open 50 mm)

1 32 444 5

2. Cutlery Bsket:

No. Item

Cups

Sucers

 Glsses

Dessert Dishes

Dinner Pltes

Soup Pltes

Cutlery Bsket

No. Item

1Soup Spoons

2Forks

3 Knives

4Tespoons

5Dessert Spoons

Informtion for comprbility tests in

ccordnce with (*AS/NZS 2007.1)

• Cpcity: 6 plce settings

• Progrm: ECO 50° C

• Rinse id setting: 6 Detergent

(Pre/min): 5/17.5g

• Door is open t the end of the drying

cycle for the drying performnce test

(Door position: Open 50 mm)

esatto.house

Prepring  Loding Dishes

For Wshing the Following Cutlery / Dishes

RECOMMENDED:

Scrpe o ny lrge mounts of leftover food. Soften

remnnts of burnt food in pns. It is not necessry to rinse

the dishes under running wter.

For best performnce of the dishwsher, follow these

loding guidelines. (Features and appearance of baskets and

cutlery baskets may vary from your model.)

• Consider buying utensils which re

identied s dishwsher-proof.

• For prticulr items, select  progrm

with the lowest possible temperture.

• To prevent dmge, it is importnt you

do not tke glss or cutlery out of the

dishwsher immeditely fter the progrm

hs ended.

• Very smll items should not be wshed in the

dishwsher s they could esily fll out of the bsket.

NOT SUITABLE:

• Cutlery with wooden, horn chin

or mother-of-perl hndles

• Non het-resistnt plstic items

• Older cutlery with glued prts tht

re not temperture resistnt

• Bonded cutlery items or dishes

• Items mde of pewter or copper

• Crystl glss-wre

• Steel items subject to rusting

• Wooden pltters, bowls etc.

• Items mde from synthetic bres

LIMITED SUITABILITY:

• Some types of glsses cn become

dull fter  lrge number of wshes

• Silver nd luminum prts hve 

tendency to discolour during wshing

• Glzed ptterns my lso fde if

mchine wshed frequently

RECOMMENDED LOADING METHOD:

• Items such s cups, glsses, pots/pns, etc. re fced

downwrds.

• Curved items, or ones with recesses, should be loded

slnt so tht wter cn run o.

• All utensils re stcked securely nd cn not tip over.

• All utensils re plced in the wy tht the spry rms

cn rotte freely during wshing.

• Lod hollow items such s cups, glsses, pns etc.

With the opening fcing downwrds so tht wter

cnnot collect in the continer or  deep bse.

• Dishes nd items of cutlery must not lie inside one

nother, or cover ech other.

• To void dmge, glsses should not touch one nother.

• The upper bsket is designed to hold more delicte nd

lighter dishwre such s glsses, coee nd te cups.

• Long blded knives stored in n upright position re 

potentil hzrd!

• Long nd / or shrp items of cutlery such s crving

knives must be positioned horizontlly in the upper

bsket.

• Plese do not overlod your dishwsher. This is

importnt for good results nd for resonble

consumption of energy.

REMOVING THE DISHES:

To prevent wter dripping from the upper bsket into the

lower bsket, we recommend tht you empty the lower

bsket rst, followed by the upper bsket.

INSTALLATION INSTRUCTION

Ensure the voltage and frequency of the power being corresponds to those on the

rating plate. Only insert the plug into an electrical socket which is earthed

properly. If the electrical socket to which the appliance must be connected is not

appropriate for the plug, replace the socket, rather than using a adaptors or the like as

they could cause overheating and burns.

Electrical requirements

Electrical connection

Ensure that proper earthing exists before use

About Power Connection

WARNING

For personal safety:

Do not use an extension cord or an adapter

plug with this appliance.

Do not, under any circumstances, cut or remove

the earthing connection from the power cord.

The installation of the pipes and electrical equipments should be done by professionals.

Attention

WARNING

Electrical Shock Hazard

Disconnect electrical power before

installing dishwasher.

Failure to do so could result in death or

electrical shock.

Please look at the rating label to know the rating voltage and connect the dishwasher

to the appropriate power supply. Use the required fuse 10A/13A/16A, time delay fuse

or circuit breaker recommended and provide separate circuit serving only this appliance.

WARNING :

Items will be hot! To prevent dmge, do not tke

glss nd cutlery out of the dishwsher for round

15 minutes fter the progrm hs ended.

User Manual

For the best washing effect, please load the baskets refer to standard

loading options on last section of PART Generic VersionⅠ:

For the best washing effect, please load the baskets refer to standard

loading options on last section of PART Ⅰ: Generic Version

WARNING

Do not let any item extend through

the bottom.

Always load sharp utensils with the

sharp point down!

Loading the cutlery basket

For personal safety and a top quality cleaning,

place the silverware in the basket making sure that:

They do not nest together.

Silverware is placed with the handles-down.

But place knives and other potentially dangerous

utensils are placed handles-up.

Loading the basket

All tableware can't be placed face up, in order

to improve the cleaning area and washing

performance, it is recommended to place the

dirty side towards the spray arm.

Please don't let tableware out of basket bottom

to make sure not block the moving of the spray arm.

The maximum diameter advised for plates in front

of the detergent dispenser is of 19 cm, this not to

hamper the opening of it.

For the best washing effect, please load the baskets refer to standard

loading options on last section of PART Generic VersionⅠ:

For the best washing effect, please load the baskets refer to standard

loading options on last section of PART Ⅰ: Generic Version

WARNING

Do not let any item extend through

the bottom.

Always load sharp utensils with the

sharp point down!

Loading the cutlery basket

For personal safety and a top quality cleaning,

place the silverware in the basket making sure that:

They do not nest together.

Silverware is placed with the handles-down.

But place knives and other potentially dangerous

utensils are placed handles-up.

Loading the basket

All tableware can't be placed face up, in order

to improve the cleaning area and washing

performance, it is recommended to place the

dirty side towards the spray arm.

Please don't let tableware out of basket bottom

to make sure not block the moving of the spray arm.

The maximum diameter advised for plates in front

of the detergent dispenser is of 19 cm, this not to

hamper the opening of it.

Prepring  Loding Dishes

Loding the Bskets According to AUS/NZ S 2007.1

LOADING THE BASKET:

All tblewre cn't be plced fce up, in order to

improve the clening re nd wshing performnce,

it is recommended to plce the dirty side towrds the

spry rm.

Plese don't let tblewre out of bsket bottom to

mke sure not block the moving of the spry rm. The

mximum dimeter dvised for pltes in front of the

detergent dispenser is of 19 cm, this not to hmper the

opening of it.

LOADING THE CUTLERY BASKET

For personl sfety nd  top qulity clening, plce

the silverwre in the bsket mking sure tht:

• They do not nest together.

• Silverwre is plced with the hndles-down.

• But plce knives nd other potentilly dngerous

utensils re plced hndles-up.

For the best washing effect, please load the baskets refer to standard

loading options on last section of PART Generic VersionⅠ:

For the best washing effect, please load the baskets refer to standard

loading options on last section of PART Ⅰ: Generic Version

WARNING

Do not let any item extend through

the bottom.

Always load sharp utensils with the

sharp point down!

Loading the cutlery basket

For personal safety and a top quality cleaning,

place the silverware in the basket making sure that:

They do not nest together.

Silverware is placed with the handles-down.

But place knives and other potentially dangerous

utensils are placed handles-up.

Loading the basket

All tableware can't be placed face up, in order

to improve the cleaning area and washing

performance, it is recommended to place the

dirty side towards the spray arm.

Please don't let tableware out of basket bottom

to make sure not block the moving of the spray arm.

The maximum diameter advised for plates in front

of the detergent dispenser is of 19 cm, this not to

hamper the opening of it.

WARNING :

Do not let ny item

extend through the

bottom. Alwys lod

shrp utensils with

the shrp point down!

INSTALLATION INSTRUCTION

Ensure the voltage and frequency of the power being corresponds to those on the

rating plate. Only insert the plug into an electrical socket which is earthed

properly. If the electrical socket to which the appliance must be connected is not

appropriate for the plug, replace the socket, rather than using a adaptors or the like as

they could cause overheating and burns.

Electrical requirements

Electrical connection

Ensure that proper earthing exists before use

About Power Connection

WARNING

For personal safety:

Do not use an extension cord or an adapter

plug with this appliance.

Do not, under any circumstances, cut or remove

the earthing connection from the power cord.

The installation of the pipes and electrical equipments should be done by professionals.

Attention

WARNING

Electrical Shock Hazard

Disconnect electrical power before

installing dishwasher.

Failure to do so could result in death or

electrical shock.

Please look at the rating label to know the rating voltage and connect the dishwasher

to the appropriate power supply. Use the required fuse 10A/13A/16A, time delay fuse

or circuit breaker recommended and provide separate circuit serving only this appliance.

esatto.house

The rinse aid is released during the final rinse to prevent water from forming droplets

on your dishes, which can leave spots and streaks. It also improves drying by allowing

water to roll off the dishes. Your dishwasher is designed to use liquid rinse aids.

When to refill the rinse aid dispenser

WARNING

Only use branded rinse aid for dishwasher. Never fill the rinse aid dispenser

with any other substances (e.g. Dishwasher cleaning agent, liquid detergent).

This would damage the appliance.

Unless the rinse-aid warning light ( ) on the control panel is on, you can always

estimate the amount from the color of the optical level indicator located next to the

cap. When the rinse-aid container is full, the indicator will be fully dark. The size of the

dark dot decreases as the rinse-aid diminishes. You should never let the rinse aid level

be less than 1/4 full.

As the rinse aid diminishes, the size of the black dot on the rinse aid level indicator

changes, as illustrated below.

Full 3/4 full 1/2 full 1/4 full Empty

Function Of The Rinse Aid And Detergent

Function of detergent

The chemical ingredients that compose the detergent are necessary to remove, crush and

dispense all dirt out of the dishwasher. Most of the commercial quality detergents are

suitable for this purpose.

WARNING

Proper Use of Detergent

Use only detergent specifically made for dishwashers use. Keep your detergent

fresh and dry.

Don't put powdered detergent into the dispenser until you are ready to wash

dishes.

Dishwasher detergent is corrosive! Keep dishwasher

detergent out of the reach of children.

Prepring  Loding Dishes

Rinse-Aid  Detergent

FUNCTION OF RINSEAID AND DETERGENT:

The rinse id is relesed during the nl rinse to prevent wter from forming

droplets on your dishes, which cn leve spots nd streks. It lso improves

drying by llowing wter to roll o the dishes. Your dishwsher is designed to use

liquid rinse ids.

WHEN TO REFILL THE RINSEAID DISPENSER:

Unless the rinse-id wrning light ( ) on the control pnel is on, you cn lwys

estimte the mount from the color of the opticl level indictor locted next to

the cp. When the rinse-id continer is full, the indictor will be fully drk. The

size of the drk dot decreses s the rinse-id diminishes. You should never let

the rinse id level be less thn 1/4 full.

As the rinse id diminishes, the size of the blck dot on the rinse id level

indictor chnges, s illustrted below.

FUNCTION OF DETERGENT:

The chemicl ingredients tht compose the detergent re necessry to remove,

crush nd dispense ll dirt out of the dishwsher. Most of the commercil qulity

detergents re suitble for this purpose.

INSTALLATION INSTRUCTION

Ensure the voltage and frequency of the power being corresponds to those on the

rating plate. Only insert the plug into an electrical socket which is earthed

properly. If the electrical socket to which the appliance must be connected is not

appropriate for the plug, replace the socket, rather than using a adaptors or the like as

they could cause overheating and burns.

Electrical requirements

Electrical connection

Ensure that proper earthing exists before use

About Power Connection

WARNING

For personal safety:

Do not use an extension cord or an adapter

plug with this appliance.

Do not, under any circumstances, cut or remove

the earthing connection from the power cord.

The installation of the pipes and electrical equipments should be done by professionals.

Attention

WARNING

Electrical Shock Hazard

Disconnect electrical power before

installing dishwasher.

Failure to do so could result in death or

electrical shock.

Please look at the rating label to know the rating voltage and connect the dishwasher

to the appropriate power supply. Use the required fuse 10A/13A/16A, time delay fuse

or circuit breaker recommended and provide separate circuit serving only this appliance.

WARNING :

Only use rinse-id for dishwsher. DO NOT ll the rinse-id

dispenser with ny other substnces (e.g. Dishwsher clening

gent or liquid detergent). Any substnce used in the rinse-id

dispenser tht is not rinse-id will dmge the pplince!

INSTALLATION INSTRUCTION

Ensure the voltage and frequency of the power being corresponds to those on the

rating plate. Only insert the plug into an electrical socket which is earthed

properly. If the electrical socket to which the appliance must be connected is not

appropriate for the plug, replace the socket, rather than using a adaptors or the like as

they could cause overheating and burns.

Electrical requirements

Electrical connection

Ensure that proper earthing exists before use

About Power Connection

WARNING

For personal safety:

Do not use an extension cord or an adapter

plug with this appliance.

Do not, under any circumstances, cut or remove

the earthing connection from the power cord.

The installation of the pipes and electrical equipments should be done by professionals.

Attention

WARNING

Electrical Shock Hazard

Disconnect electrical power before

installing dishwasher.

Failure to do so could result in death or

electrical shock.

Please look at the rating label to know the rating voltage and connect the dishwasher

to the appropriate power supply. Use the required fuse 10A/13A/16A, time delay fuse

or circuit breaker recommended and provide separate circuit serving only this appliance.

WARNING :

• Use only detergent speciclly mde for dishwshers use.

Keep your detergent fresh nd dry.

• Don't put powdered detergent into the dispenser until you

re redy to wsh dishes.

Dishwsher detergent is corrosive!

Keep dishwsher detergent out of the rech of children.

Full ¾ Full ½ Full ¼ Full Empty

User Manual

3Replace the cap by inserting it

aligned with "open" arrow and

turning it to the closed (right) arrow.

NOTE:

Clean up any spilled rinse aid with

an absorbent cloth to avoid

excessive foaming during the next

wash.

1 2

To open the dispenser, turn the cap

to the "open" (left) arrow and lift

it out.

Carefully pour in the rinse-aid into

its dispenser, whilst avoiding it to

overflow.

Rinse-Aid indicator

Filling The Rinse Aid Reservoir

Adjusting the rinse aid reservoir

The rinse aid reservoir has six settings. Both the

recommended setting and the factory setting is “4”. If the

dishes are not drying properly or are spotted, adjust the dial

to the next higher number until your dishes are spot-free.

Reduce it if there are sticky whitish stains on your dishes or

a bluish film on glassware or knife blades.

AAddjjuusstt lleevveerr((RRiinnssee))

翻盖1 滑盖

3Replace the cap by inserting it

aligned with "open" arrow and

turning it to the closed (right) arrow.

NOTE:

Clean up any spilled rinse aid with

an absorbent cloth to avoid

excessive foaming during the next

wash.

1 2

To open the dispenser, turn the cap

to the "open" (left) arrow and lift

it out.

Carefully pour in the rinse-aid into

its dispenser, whilst avoiding it to

overflow.

Rinse-Aid indicator

Filling The Rinse Aid Reservoir

Adjusting the rinse aid reservoir

The rinse aid reservoir has six settings. Both the

recommended setting and the factory setting is “4”. If the

dishes are not drying properly or are spotted, adjust the dial

to the next higher number until your dishes are spot-free.

Reduce it if there are sticky whitish stains on your dishes or

a bluish film on glassware or knife blades.

AAddjjuusstt lleevveerr((RRiinnssee))

翻盖1 滑盖

3Replace the cap by inserting it

aligned with "open" arrow and

turning it to the closed (right) arrow.

NOTE:

Clean up any spilled rinse aid with

an absorbent cloth to avoid

excessive foaming during the next

wash.

1 2

To open the dispenser, turn the cap

to the "open" (left) arrow and lift

it out.

Carefully pour in the rinse-aid into

its dispenser, whilst avoiding it to

overflow.

Rinse-Aid indicator

Filling The Rinse Aid Reservoir

Adjusting the rinse aid reservoir

The rinse aid reservoir has six settings. Both the

recommended setting and the factory setting is “4”. If the

dishes are not drying properly or are spotted, adjust the dial

to the next higher number until your dishes are spot-free.

Reduce it if there are sticky whitish stains on your dishes or

a bluish film on glassware or knife blades.

AAddjjuusstt lleevveerr((RRiinnssee))

翻盖1 滑盖

Prepring  Loding Dishes

Filling the Rinse-Aid Reservoir

INSTALLATION INSTRUCTION

Ensure the voltage and frequency of the power being corresponds to those on the

rating plate. Only insert the plug into an electrical socket which is earthed

properly. If the electrical socket to which the appliance must be connected is not

appropriate for the plug, replace the socket, rather than using a adaptors or the like as

they could cause overheating and burns.

Electrical requirements

Electrical connection

Ensure that proper earthing exists before use

About Power Connection

WARNING

For personal safety:

Do not use an extension cord or an adapter

plug with this appliance.

Do not, under any circumstances, cut or remove

the earthing connection from the power cord.

The installation of the pipes and electrical equipments should be done by professionals.

Attention

WARNING

Electrical Shock Hazard

Disconnect electrical power before

installing dishwasher.

Failure to do so could result in death or

electrical shock.

Please look at the rating label to know the rating voltage and connect the dishwasher

to the appropriate power supply. Use the required fuse 10A/13A/16A, time delay fuse

or circuit breaker recommended and provide separate circuit serving only this appliance.

Note :

Clen up ny spilled rinse id with n

bsorbent cloth to void excessive foming

during the next wsh.

ADJUSTING THE RINSE AID RESERVOIR

The rinse id reservoir hs six settings. Both the recommended setting nd the fctory setting is

“4”. If the dishes re not drying properly or re spotted, djust the dil to the next higher number

until your dishes re spot-free. Reduce it if there re sticky whitish stins on your dishes or 

bluish lm on glsswre or knife bldes.

3Replace the cap by inserting it

aligned with "open" arrow and

turning it to the closed (right) arrow.

NOTE:

Clean up any spilled rinse aid with

an absorbent cloth to avoid

excessive foaming during the next

wash.

1 2

To open the dispenser, turn the cap

to the "open" (left) arrow and lift

it out.

Carefully pour in the rinse-aid into

its dispenser, whilst avoiding it to

overflow.

Rinse-Aid indicator

Filling The Rinse Aid Reservoir

Adjusting the rinse aid reservoir

The rinse aid reservoir has six settings. Both the

recommended setting and the factory setting is “4”. If the

dishes are not drying properly or are spotted, adjust the dial

to the next higher number until your dishes are spot-free.

Reduce it if there are sticky whitish stains on your dishes or

a bluish film on glassware or knife blades.

AAddjjuusstt lleevveerr((RRiinnssee))

翻盖1 滑盖

Adjust lever (Rinse)

Rinse-Aid Indictor

 To open the dispenser, turn the cp to the

“open” (left) rrow nd lift it out.

 Replce the cp by inserting it ligned

with “open” rrow nd turning it to the

closed (right) rrow.

 Crefully pour in the rinse-id into its

dispenser, whilst voiding it to overow.

Esatto EBTDWS User manual

Related papers

Other documents