Shenzhen W1S TWS Smart Bluetooth Headset Earbuds User manual

Brand: Shenzhen

Model: W1S TWS Smart Bluetooth Headset Earbuds

Type: User manual

Shenzhen W1S TWS Smart Bluetooth Headset Earbuds offer a seamless wireless connection with Bluetooth 5.1 technology, ensuring stable pairing and clear audio transmission within a 10-meter range. With hands-free calling capabilities, you can easily answer or hang up calls with a simple click. Activate Siri or Google Assistant with a long press for voice control convenience. Additionally, the earbuds boast intuitive touch controls for music playback, allowing you to play, pause, skip tracks, and adjust volume with just a few taps.

Earbuds Pairing

Charging

(Do not place wet earbuds in the charging cabin)

Warning:

Use a 5V 500mA adapter to charge the charging cabin.

The charging cabin will automatically charge the earbuds once

they are properly placed in the cabin.

1. The earbuds will automatically power on when removed from

the charging cabin, and will ﬂash in alternating red and blue

light to start auto pairing. The left and right earbuds will

automatically pair with each other.

2. Turn on your phone’s Bluetooth and search for nearby

devices. The earbuds’ Bluetooth name is “Earbuds”, tap to

connect the earbuds.

Product Parameters

1. Earbuds Talk Time:

2. Wireless Connection: Bluetooth 5.1

3. Communication Distance: Approximately 10m

(in unobstructed open areas)

4. Bluetooth Protocol: HSP/HFP/A2DP/AVRCP

5. Battery Type: Lithium-ion polymer battery

FCC Statement

This equipment has been tested and found to comply with the

limits for a Class B

digital device, pursuant to part 15 of the FCC rules. These limits

are designed to

provide reasonable protection against harmful interference in a

residential installation.

This equipment generates, uses and can radiate radio

frequency energy and, if not

installed and used in accordance with the instructions, may

cause harmful interference

to radio communications. However, there is no guarantee that

interference will not

occur in a particular installation. If this equipment does cause

harmful interference to

radio or television reception, which can be determined by

turning the equipment oﬀ

and on, the user is encouraged to try to correct the interference

by one or more of the

following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit diﬀerent

from that to which the

receiver is connected.

Touch Control

TWS Earbuds

User Manual V1.0

TWS Earbuds

Android & iOS

Type-C USB

5V500ma

Click twice to skip to the next song.

Click three to skip to the previous song.

Long press to call Siri or say "Hey Siri".

Click to play or pause music, answer or

hang up calls.

-Consult the dealer or an experienced radio/TV technician for

help.

To assure continued compliance, any changes or modiﬁcations

not expressly

approved by the party.

Responsible for compliance could void the user’s authority to

operate this

equipment. (Example- use only shielded interface cables when

connecting to

computer or peripheral devices).

This equipment complies with Part 15 of the FCC Rules.

Operation is subject to

the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including

interference that

may cause undesired operation.

RF warning statement:

The device has been evaluated to meet general RF exposure

requirement.

The device can be used in portable exposure condition without

restriction.

Shenzhen W1S TWS Smart Bluetooth Headset Earbuds User manual

Shenzhen W1S TWS Smart Bluetooth Headset Earbuds User manual

Shenzhen W1S TWS Smart Bluetooth Headset Earbuds User manual

Other documents