HIKMICRO Analyzer User Manua

HIKMICRO Analyzer

User Manual

Legal Informaon

About this Manual

The Manual includes instrucons for using and managing the Product. Pictures, charts, images and

all other informaon hereinaer are for descripon and explanaon only. The informaon

contained in the Manual is subject to change, without noce, due to rmware updates or other

reasons. Please nd the latest version of this Manual at the HIKMICRO website ( hp://

www.hikmicrotech.com ).

Please use this Manual with the guidance and assistance of professionals trained in supporng the

Product.

Trademarks

and other HIKMICRO's trademarks and logos are the properes of

HIKMICRO in various jurisdicons.

Other trademarks and logos menoned are the properes of their respecve owners.

Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT

DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED "AS IS" AND "WITH

ALL FAULTS AND ERRORS". HIKMICRO MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING

WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR

PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKMICRO

BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,

INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS

INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,

WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY,

OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKMICRO HAS BEEN

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.

YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY

RISKS, AND HIKMICRO SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION,

PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS

INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKMICRO WILL PROVIDE TIMELY

TECHNICAL SUPPORT IF REQUIRED.

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE

SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.

ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT

INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF

PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS.

YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE

HIKMICRO Analyzer User Manual

i

DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR

PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED

TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN

RIGHTS ABUSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATTER

PREVAILS.

HIKMICRO Analyzer User Manual

ii

Symbol Convenons

The symbols that may be found in this document are dened as follows.

Symbol Descripon

Danger

Indicates a hazardous situaon which, if not avoided, will or could

result in death or serious injury.

Cauon

Indicates a potenally hazardous situaon which, if not avoided, could

result in equipment damage, data loss, performance degradaon, or

unexpected results.

Note Provides addional informaon to emphasize or supplement

important points of the main text.

HIKMICRO Analyzer User Manual

iii

Contents

Chapter 1 Overview .................................................................................................................... 1

1.1 Introducon ........................................................................................................................... 1

1.2 Workow ............................................................................................................................... 2

1.3 Running Environment ............................................................................................................ 2

Chapter 2 Install Soware .......................................................................................................... 3

2.1 Soware Installaon .............................................................................................................. 3

Chapter 3 Upgrade Soware ....................................................................................................... 4

3.1 Soware Upgrade .................................................................................................................. 4

Chapter 4 Uninstall Soware ...................................................................................................... 5

4.1 Uninstall or Modify Soware ................................................................................................. 5

Chapter 5 User Interface ............................................................................................................. 6

5.1 Applicaon Pages ................................................................................................................... 6

5.1.1 Library ........................................................................................................................... 6

5.1.2 Analysis ......................................................................................................................... 6

5.1.3 Report ........................................................................................................................... 6

5.1.4 Live ................................................................................................................................ 6

5.2 Sengs .................................................................................................................................. 6

5.2.1 Switch Languages .......................................................................................................... 7

5.2.2 Switch Temperature Display Unit .................................................................................. 7

5.2.3 Switch Distance Display Unit ......................................................................................... 7

5.2.4 Switch Area Display Unit ............................................................................................... 7

5.3 User Help ............................................................................................................................... 7

5.3.1 View User Manual ......................................................................................................... 7

5.3.2 View Client Version ....................................................................................................... 7

Chapter 6 File Management ....................................................................................................... 8

6.1 Navigaon for File Management Page ................................................................................... 8

HIKMICRO Analyzer User Manual

iv

6.2 My Favorites Management .................................................................................................... 9

6.2.1 Create My Favorites ...................................................................................................... 9

6.2.2 Change Locaon of My Favorites .................................................................................. 9

6.2.3 View Details of My Favorites ......................................................................................... 9

6.3 Favorites Management .......................................................................................................... 9

6.3.1 Create Favorites .......................................................................................................... 10

6.3.2 Rename Favorites ........................................................................................................ 10

6.3.3 Delete Favorites .......................................................................................................... 10

6.4 Import File ............................................................................................................................ 10

6.4.1 Set Import Mode for Files ........................................................................................... 11

6.5 Rename File ......................................................................................................................... 12

6.6 Delete File ............................................................................................................................ 12

6.7 Add Tag to File ...................................................................................................................... 13

6.8 Add Text Annotaon ............................................................................................................ 13

6.9 File Grouping and Sorng .................................................................................................... 14

6.10 File Filtering ....................................................................................................................... 15

6.10.1 Filter Files by Time Range ......................................................................................... 15

6.10.2 Filter Files by Tag ....................................................................................................... 15

6.10.3 Filter Files by Text Annotaon ................................................................................... 15

6.10.4 Filter Files by Name ................................................................................................... 15

6.10.5 Filter Files by Device Model ...................................................................................... 16

6.10.6 Filter Files by Asset ID ............................................................................................... 16

Chapter 7 Image and Video Analysis ......................................................................................... 17

7.1 Add Video/Image to Task List ............................................................................................... 17

7.1.1 Add Single Video/Image .............................................................................................. 17

7.1.2 Add Mulple Videos/Images ....................................................................................... 17

7.1.3 Add All Videos/Images ................................................................................................ 18

7.2 Image Analysis ..................................................................................................................... 18

HIKMICRO Analyzer User Manual

v

7.2.1 Navigaon for Analysis Tab (Image) ............................................................................ 18

7.2.2 Temperature Measurement Tools ............................................................................... 19

7.2.3 Temperature Alarm Analysis ....................................................................................... 25

7.2.4 View Temperature Distribuon Chart (Image) ............................................................ 26

7.2.5 Image Eding Tools ..................................................................................................... 26

7.2.6 Level and Span ............................................................................................................ 39

7.2.7 Save/Export Image ...................................................................................................... 42

7.2.8 Exit Analysis ................................................................................................................ 44

7.3 Report .................................................................................................................................. 44

7.3.1 Generate Report ......................................................................................................... 45

7.3.2 Report Template ......................................................................................................... 46

7.3.3 Edit Report .................................................................................................................. 48

7.3.4 Export Report .............................................................................................................. 67

7.4 Video Analysis ...................................................................................................................... 68

7.4.1 Navigaon for Analysis Tab (Video) ............................................................................. 68

7.4.2 View Temperature Distribuon Chart / Time-Temperature Curve .............................. 69

7.4.3 Level and Span ............................................................................................................ 71

7.4.4 Export Temperature Value .......................................................................................... 73

7.4.5 Save / Save As Video ................................................................................................... 74

7.4.6 Exit Video Analysis ...................................................................................................... 74

Chapter 8 Live ........................................................................................................................... 75

8.1 Connect Device .................................................................................................................... 75

8.2 Navigaon for Live Tab ......................................................................................................... 76

8.3 View Temperature Distribuon Chart / Time-Temperature Curve ....................................... 77

8.3.1 Enable/Disable Temperature Curve ............................................................................ 78

8.3.2 Export Max./Min./Avg. ................................................................................................ 79

8.4 Set Frame Rate ..................................................................................................................... 79

8.5 Capture an Image ................................................................................................................. 79

HIKMICRO Analyzer User Manual

vi

8.5.1 Set Informaon Overlaid on Image ............................................................................. 80

8.6 Record Video ........................................................................................................................ 80

HIKMICRO Analyzer User Manual

vii

Chapter 1 Overview

This user manual provides the operaon guide of the client. To ensure the properness of usage and

stability of the client, refer to the contents below and read the manual carefully before installaon

and operaon.

1.1 Introducon

The client is used to view and analyze the temperature informaon contained in the pictures

recorded by the thermal device and generate a report. The radiometric images and JPEG images

can be imported to the client, and the client provides image management funcon, including le

classicaon, adding tags for images, etc. Mulple operaons can be performed in the process of

temperature measurement data analysis, including conguring measurements, adjusng

measurement parameters, seng image display mode, seng color coloraon, etc. Aer image

analysis, you can view the measurement results, save the pictures or export the report as required.

HIKMICRO Analyzer User Manual

1

1.2 Workow

Figure 1-1 Workow

1. Use your device to take thermal images.

2. Import the images into HIKMICRO Analyzer.

3. Generate a thermography report in PDF format or in ODT format to further edit it.

4. Send the report to other people via e-mail.

1.3 Running Environment

The followings are the recommended running environments for installing the client.

●Operang System

○Microso Windows 7 / Windows 8.1 / Windows 10 (64-bit operang system)

○Windows server (64-bit operang system)

●CPU: i5-4590 or above

●RAM: 4G or above

●Graphics Card: RADEON X700 series 256M or above

HIKMICRO Analyzer User Manual

2

Chapter 2 Install Soware

2.1 Soware Installaon

Open the soware installaon package, and then double-click to run the setup, click I agree to

the terms in License Agreement in the pop-up window. Select One-Click Installaon or Customize

according to your requirement.

One-Click Installaon

The soware is installed in the path by default: C:\Program Files.

Customize Installaon

Click and select the installaon path.

Aer installaon, you can check Create a Desktop Icon as needed.

HIKMICRO Analyzer User Manual

3

Chapter 3 Upgrade Soware

3.1 Soware Upgrade

Before You Start

An earlier version have been installed.

Before upgrading the soware, please make sure you have stopped running the soware.

Steps

1. Open the soware installaon package, and then double-click to run the setup.

2. Click Upgrade in the pop-up window.

Note

The soware will be upgraded to the same path of the earlier version.

What to do next

Aer upgrade, check Create a Desktop Icon as needed.

HIKMICRO Analyzer User Manual

4

Chapter 4 Uninstall Soware

4.1 Uninstall or Modify Soware

Before You Start

Before uninstalling or modifying the soware, please make sure you have stopped running the

soware.

Steps

1. Click → Control Panel → Procedures and Funcons in the Windows operang system.

2. Right-click HIKMICRO Analyzer and then select Uninstall/Modify, or simply double-click

HIKMICRO Analyzer.

3. In the pop-up window, select:

-Uninstall.

-Modify.

A prompt will pop up aer the uninstallaon or modicaon is completed.

HIKMICRO Analyzer User Manual

5

Chapter 5 User Interface

This chapter describes the applicaon pages, the supported system sengs, and user help.

5.1 Applicaon Pages

Aer starng the HIKMICRO Analyzer, you are presented with the Library tab. On the top, you can

click Library, Analysis, Report, and Live to switch between the tabs.

5.1.1 Library

On the top, select Library tab. In Favorites Library, click All Files, the center pane displays all les

that have been imported to the client. When you right-click a le, you can quickly locate the folder

where you have saved the images on your computer. When you click a favorites folder you have

created in the le pane, the images grouped in that folder will be displayed in the center pane.

5.1.2 Analysis

Select on the le to enter the Analysis tab. In this page, you can edit and analyze images and

videos for more accurate temperature informaon. In the le pane, you can view the image/video

informaon, congure temperature parameters, and check temperature measurement results. You

can click Report to select a template and generate the report for images.

5.1.3 Report

On the top, select the Report tab. In Report, you can generate a report for images in Task List. Aer

generang the report, you can edit the report, change the report template, etc. You can also

export the report to the local PC.

5.1.4 Live

On the top, select Live. On this tab, you can connect a smartphone module and start live view.

During live view, you can capture images, lay out measurement tools on the live video, and view

the measured results of every frame.

5.2 Sengs

In the Sengs window, you can switch the display language, the display temperature unit and the

distance display unit.

HIKMICRO Analyzer User Manual

6

Note

Some sengs require a restart of HIKMICRO Analyzer before a change takes eect.

5.2.1 Switch Languages

In the top-right corner, click → Language to select a language.

5.2.2 Switch Temperature Display Unit

Steps

1. In the top-right corner, click → Measurement .

2. In Temperature Unit, select a temperature unit.

5.2.3 Switch Distance Display Unit

Steps

1. In the top-right corner, click → Measurement .

2. In Display Unit, select a unit.

5.2.4 Switch Area Display Unit

Steps

1. In the top-right corner, click → Measurement .

2. In the Area Unit, select a unit.

5.3 User Help

You can view the user manual and version informaon of HIKMICRO Analyzer, and give us your

feedback.

5.3.1 View User Manual

On the top-right corner, click to view the manual.

5.3.2 View Client Version

In the top-right corner, click → Version to view the client version.

HIKMICRO Analyzer User Manual

7

Chapter 6 File Management

6.1 Navigaon for File Management Page

Figure 6-1 File Management Page

①: Local le. You can view images stored on the local PC and import them to Favorites Library

only or specic Favorites.

②: My favorites. You can manage imported image and video les in Favorites Library or specic

Favorites. The number in the brackets represents the number of les imported and the maximum

number of les that can be imported.

③: Tool bar. You can perform operaons including imporng les, adding tags, deleng les,

renaming les, moving les, etc.

④: Files. Select My Favorites or specic Favorites to view the imported les.

⑤: View le info. Click to view the details of the selected le.

⑥: Filter/sort. You can lter and sort les by condion.

⑦: Task list. You can add local les or les in the Favorites to the task list, for le analyzing and

report generang later.

⑧: Analyze/report.

HIKMICRO Analyzer User Manual

8

6.2 My Favorites Management

My Favorites shows all les imported to the client and you can navigate to any specic favorites

folder. For les imported from your local computer or any connected network shares, you can

perform operaons including viewing details, categorizing, eding, sorng, adding tags, etc.

6.2.1 Create My Favorites

When you open the client for the rst me aer installaon, you need to create a path for My

Favorites.

In the pop-up window, select a folder for saving les.

Note

●Saving to the C drive or desktop is not recommended.

●The folder for saving les should be an empty folder.

●You can view or edit the folder path. See details in Change Locaon of My Favorites .

Aer creang My Favorites, sample pictures would automacally be downloaded to My Favorites.

The sample pictures can be used for material management, material analysis, and report

generang.

6.2.2 Change Locaon of My Favorites

You can view or edit the folder saving path of My Favorites.

Steps

1. On the menu bar, click .

2. Click Locaon.

3. Under My Favorites, click to select folder path, or edit the path manually.

4. Click Save.

6.2.3 View Details of My Favorites

Right-click All Files and select View Details to view the basic informaon, including the creang

me, latest eding me, library capacity, and the number of exisng les in the library.

6.3 Favorites Management

You can create and name dierent favorites according to your usage scenarios, and import les to

the favorites. The favorites can be used to categorize les from My Favorites.

Go to Library → My Favorites → All Files to view the favorites list.

HIKMICRO Analyzer User Manual

9

6.3.1 Create Favorites

In My Favorites, you can create favorites folders to categorize les.

On the Library page, click beside My Favorites to create a favorites.

Note

●Up to 32 Favorites can be created and up to 350 les can be imported to a favorites. Up to 10240

les are allowed in My Favorites.

●A Sample Favorites folder is created by default and sample images will be imported to this folder

automacally.

6.3.2 Rename Favorites

Right-click the favorites name and select Rename to rename it.

6.3.3 Delete Favorites

Right-click the favorites name and select Delete to delete it.

6.4 Import File

Before analysis, you can import les to My Favorites or specic Favorites for le management.

Steps

Note

●Files that can be imported include images with temperature informaon, namely the captured

picture in the thermal device, and videos with temperature informaon.

●Batch imporng les is supported. The le extension should be .jpeg, .jpg, or .rv.

●Up to 10240 les can be imported to the client.

●Files that are imported to My Favorites only are displayed in All Files only. They do not belong to

any specic Favorites.

●Before imporng les, you can congure the import mode. See details in Set Import Mode for

Files .

1. On the Library page, select one of the following methods to import les.

-Select All Files or a specic Favorites and click Import. Select les and import them to the

client.

-Select les in Local File. Right-click the les and select Import to Favorites, and select the

target favorites for imporng.

-Open a folder from the local PC. Select les and drag them to All Files or a specic Favorites.

HIKMICRO Analyzer User Manual

10

Note

When My Favorites or the Favorites is empty, you can click the empty area on the right to import

les.

6.4.1 Set Import Mode for Files

Before imporng les to My Favorites, you can set the import mode (copy, cut, or index) for images

and videos respecvely.

1. On the top right corner, click to open the Sengs window. Select Import Mode.

Figure 6-2 Set Import Mode

2. Select the mode for imporng images and videos respecvely.

3. Click Save to save the sengs.

HIKMICRO Analyzer User Manual

11

Index Mode

In index mode, only the index of the le will be copied to the client for le management. Changes

are made to the source le.

Copy Mode

In copy mode, the le will be copied to the client and the copy will be managed under My

Favorites. The original le is untouched.

Cut Mode

In cut mode, the le will be cut to the client and managed under the path of My Favorites. The

original le will deleted.

6.5 Rename File

Choose one of the following ways to rename the le.

●Righ-click the le you want to rename and click Rename.

●Check the le you want to rename. Click More → Rename .

Note

The le name in local PC will not be modied aer it is renamed.

6.6 Delete File

You can delete a single le or batch delete mulple les.

Note

Deleng a le under All Files will also delete the original le; deleng a le under a specic

Favorites will only remove the le from the Favorites folder.

●Delete single le:

○Hover over the le and click on the lower-right corner of the le, and then click OK in the

pop-up window.

○Right-click the le and select Delete, and then click OK in the pop-up window.

●Batch delete les:

Select mulple les as needed and click Delete in the tool bar, and then click OK in the pop-up

window.

HIKMICRO Analyzer User Manual

12

Page is loading ...

HIKMICRO Analyzer User Manua

HIKMICRO Analyzer User Manua

Related papers

Other documents