Ampire OHV101-HD Owner's manual

Category
MP3/MP4 players
Type
Owner's manual

This manual is also suitable for

Ampire OHV101-HD: This 10.1” HD-Ready LED overhead monitor is a versatile and feature-rich device designed to provide an enhanced entertainment and media experience in your vehicle.

Key Features:

  • High-Definition Display: Enjoy crystal-clear visuals with a resolution of 1280 x 720 pixels and a brightness of 600 nits.

  • Multiple Input Options: Connect your devices with ease via HDMI, AV (Cinch), and USB inputs.

  • Versatile Playback: Play a wide range of media formats, including videos (MPEG1/2/4, RM, RMVB, MOV, DIVX, MJPEG), audio (WMA, MP3, M4A, AAC), and photos (BMP, JPEG, GIF, PNG, TIFF) from USB drives.

Ampire OHV101-HD: This 10.1” HD-Ready LED overhead monitor is a versatile and feature-rich device designed to provide an enhanced entertainment and media experience in your vehicle.

Key Features:

  • High-Definition Display: Enjoy crystal-clear visuals with a resolution of 1280 x 720 pixels and a brightness of 600 nits.

  • Multiple Input Options: Connect your devices with ease via HDMI, AV (Cinch), and USB inputs.

  • Versatile Playback: Play a wide range of media formats, including videos (MPEG1/2/4, RM, RMVB, MOV, DIVX, MJPEG), audio (WMA, MP3, M4A, AAC), and photos (BMP, JPEG, GIF, PNG, TIFF) from USB drives.

ampire
OHV101-HD
German Engineering. Out of the ordinary.
Owner’s Manual
English
Before attempting to connect or operate this product, please read the instructions completely.
Pay utmost attention if you install the monitor into the driver’s compartment.
Use only in cars with a 12 Volt negative ground.
Before wiring, disconnect the cable from the negative battery terminal to avoid short
circuits or electrical shocks. Make the correct connections.
Do not damage pipe or wiring when drilling holes.
Arrange the wiring so it is not crimped or pinched by a sharp metal edge.
Do not install the monitor in locations which might hinder vehicle operations and do not
install in locations with any moisture. Use the installation materials provided with the
monitor.
Do not use bolts or nuts in the brake, airbags or other safety relevant systems to make
ground connections.
Attention! This monitor is developed for motor vehicle use only.
WARNING: DO NOT WATCH MOVIES WHILE DRIVING TO AVOID DANGER!
12 month warranty for commercial use and 24 month warranty for private use only. The
location of buying (point of purchase) must be within the EU. The proof of warranty is the
original cashiers receipt with date and type of item on it. The owners manual and installation
instructions must be observed. No warranty of destruction by wrong installation, wrong
operation, non regulated use, using of unsuitable accessories, electrical shocks, fire,
moisture or smoke, damage by improper service and cleaning. Warranty repairs are free of
charge. No refund of shipping costs or labour as well as subsequent damages. Complaints
and repairs do not extend the warranty period.
Precautions
Warranty
Environmental Reference
Old electronic devices don’t belong into the bin.
If you want to dispose this equipment later, remove all cables
and send it back to Ampire.
You can dispose this device together with your old car, too.
You don’t have to remove it in this case.
The packing can be recycled. Dispose the packing in a
collecting system planned for it.
2
Electronics Subject to correction and technical modifications
ampire
2016
EN
Package Contents
3
Electronics Subject to correction and technical modifications
ampire
2016
• Monitor
• Metal Bracket
• Main Harness
• Dome Light Wire
• Screws
• Foam Stickers
• Remote
• Owner’s Manual
x 4
x 4
Bitte lesen aufmerksam Sie die komplette Anleitung bevor Sie mit der Installation beginnen.
Before attempting to connect or operate this product, please read the instructions completely.
Bedienungsanleitung
Owner’s Manual
OHV173-HD
17.3” FULL HD
OVERHEAD MONITOR
ampire
Pay utmost attention if you install the monitor into the driver’s compartment.
Use only in cars with a 12 Volt negative ground.
Before wiring, disconnect the cable from the negative battery terminal to avoid short
circuits or electrical shocks. Make the correct connections.
Do not damage pipe or wiring when drilling holes.
Arrange the wiring so it is not crimped or pinched by a sharp metal edge.
Do not install the monitor in locations which might hinder vehicle operations and do not
install in locations with any moisture. Use the installation materials provided with the
monitor.
Do not use bolts or nuts in the brake, airbags or other safety relevant systems to make
ground connections.
Attention! This monitor is developed for motor vehicle use only.
WARNING: DO NOT WATCH MOVIES WHILE DRIVING TO AVOID DANGER!
12 month warranty for commercial use and 24 month warranty for private use only. The
location of buying (point of purchase) must be within the EU. The proof of warranty is the
original cashiers receipt with date and type of item on it. The owners manual and installation
instructions must be observed. No warranty of destruction by wrong installation, wrong
operation, non regulated use, using of unsuitable accessories, electrical shocks, fire,
moisture or smoke, damage by improper service and cleaning. Warranty repairs are free of
charge. No refund of shipping costs or labour as well as subsequent damages. Complaints
and repairs do not extend the warranty period.
Precautions
Warranty
Environmental Reference
Old electronic devices don’t belong into the bin.
If you want to dispose this equipment later, remove all cables
and send it back to Ampire.
You can dispose this device together with your old car, too.
You don’t have to remove it in this case.
The packing can be recycled. Dispose the packing in a
collecting system planned for it.
2
Electronics Subject to correction and technical modifications
ampire
2016
EN
Package Contents
3
Electronics Subject to correction and technical modifications
ampire
2016
• Monitor
• Metal Bracket
• Main Harness
• Dome Light Wire
• Screws
• Foam Stickers
• Remote
• Owner’s Manual
x 4
x 4
Bitte lesen aufmerksam Sie die komplette Anleitung bevor Sie mit der Installation beginnen.
Before attempting to connect or operate this product, please read the instructions completely.
Bedienungsanleitung
Owner’s Manual
OHV173-HD
17.3” FULL HD
OVERHEAD MONITOR
ampire
Installation
EN
4
Electronics Subject to correction and technical modifications
ampire
2016
1. Fix the mounting bracket onto the headlining by
using the screws comming with the monitor.
Ensure that the mounting bracket is solid with
the Headlining and no wires are damaged.
2. Run the power, USB and HDMI wire through the
headlining and fix the monitor onto the mounting
bracket by using the screws which are comming
with the monitor.
3. Cover the screw holes by using the seven black
foam stickers.
EN
Connections
5
Electronics Subject to correction and technical modifications
ampire
2016
Red: +12VDC
Black: GND
Yellow: Video Output
White: Audio Output left
Red: Audio Output right
Yellow: Video Input
White: Audio Input left
Red: Audio Input right
Filter and 5A Fuse
Red: +12VDC
11
12
13
14
15
16
Black: GND
Yellow: (+) positiv door trigger
Green: (-) negativ door trigger
USB
HDMI Input
11
12
13
14
15 16
Installation
EN
4
Electronics Subject to correction and technical modifications
ampire
2016
1. Fix the mounting bracket onto the headlining by
using the screws comming with the monitor.
Ensure that the mounting bracket is solid with
the Headlining and no wires are damaged.
2. Run the power, USB and HDMI wire through the
headlining and fix the monitor onto the mounting
bracket by using the screws which are comming
with the monitor.
3. Cover the screw holes by using the seven black
foam stickers.
EN
Connections
5
Electronics Subject to correction and technical modifications
ampire
2016
Red: +12VDC
Black: GND
Yellow: Video Output
White: Audio Output left
Red: Audio Output right
Yellow: Video Input
White: Audio Input left
Red: Audio Input right
Filter and 5A Fuse
Red: +12VDC
11
12
13
14
15
16
Black: GND
Yellow: (+) positiv door trigger
Green: (-) negativ door trigger
USB
HDMI Input
11
12
13
14
15 16
Remote
EN
1) Mute
2) Power On / Off
3a) Arrow buttons to select the menu values
3b) Arrow buttons to select the menu values
and for Volume
4) Backward
5) Forward
6) OK to confirm the selected settings
7) Return
8) Next
9) Mode: To change the aspect ratio
10) Setup: To enter the setup menu
11) Return
12) Source: Selects the inputs USB, HDMI, AUX
13) Play/Pause
14) Stop & Return: Press 1x = stop, resume with Play
Press 2x = fully stop, start at the main directory
with Play
1
3b
4
3a
3b
7
10
12
13
2
5
6
3a
8
9
11
14
Insert Batteries into Remote
Open the battery compartment.
Insert a “2025” battery. Make sure
of right polarity.
Close the battery compartment.
While operating remote control,
please point it to the front panel
of the OHV101-HD.
Battery latch
Battery holder
Battery holder
3a + 13 3b 3b + 14 6 + 12
11 +
Lights off
6
Electronics Subject to correction and technical modifications
ampire
2016
EN
Setup Menu
7
Electronics Subject to correction and technical modifications
ampire
2016
Picture Setting
1. Press the Setup button of your remote to enter the
setup menu.
2. Use the arrow buttons (3) to select desired function.
3. Press OK (6) to confirm the selection.
4. Press the Return Button (11) to exit the selection.
PICTURE
Pict ure M ode S tan dar d
Color Temperate
Aspect Ra tio Pa norama
Noise Red uct ion
Screen
Backligh
Language Setting
1. Press the Setup button of your remote twice to enter
the main menu.
2. Use the arrow buttons (3) to select desired function.
3. Press OK (6) to confirm the selection.
4. Press the Return Button (11) to exit the selection.
TIME
Clock - - - - - - - -
Off Time
On Time
Sleep Timer
Auto Sleep
Time Setting
1. Press the Setup button of your remote twice to
enter the main menu.
2. Use the arrow buttons (3) to select desired function.
3. Press OK (6) to confirm the selection.
4. Press the Return Button (11) to exit the selection.
OPTION
OSD Language English
Color Ran ge 0~ 255
Blending Low
HDMI CEC
Osd Duration Off
LED Off
Sound Setting
1. Press the Setup button of your remote to enter
the sound menu.
2. Use the arrow buttons (3) to make your sound
setting selections.
3. Press OK (6) to confirm the selection.
4. Press the Return Button (11) to exit the selection.
SOUND
Sound Mode Standard
Balance
Auto Volume
Surround sound off
SPDIF MODE PCM
EQ
IR Send Off
FM Send Off
Remote
EN
1) Mute
2) Power On / Off
3a) Arrow buttons to select the menu values
3b) Arrow buttons to select the menu values
and for Volume
4) Backward
5) Forward
6) OK to confirm the selected settings
7) Return
8) Next
9) Mode: To change the aspect ratio
10) Setup: To enter the setup menu
11) Return
12) Source: Selects the inputs USB, HDMI, AUX
13) Play/Pause
14) Stop & Return: Press 1x = stop, resume with Play
Press 2x = fully stop, start at the main directory
with Play
1
3b
4
3a
3b
7
10
12
13
2
5
6
3a
8
9
11
14
Insert Batteries into Remote
Open the battery compartment.
Insert a “2025” battery. Make sure
of right polarity.
Close the battery compartment.
While operating remote control,
please point it to the front panel
of the OHV101-HD.
Battery latch
Battery holder
Battery holder
3a + 13 3b 3b + 14 6 + 12
11 +
Lights off
6
Electronics Subject to correction and technical modifications
ampire
2016
EN
Setup Menu
7
Electronics Subject to correction and technical modifications
ampire
2016
Picture Setting
1. Press the Setup button of your remote to enter the
setup menu.
2. Use the arrow buttons (3) to select desired function.
3. Press OK (6) to confirm the selection.
4. Press the Return Button (11) to exit the selection.
PICTURE
Pict ure M ode S tan dar d
Color Temperate
Aspect Ra tio Pa norama
Noise Red uct ion
Screen
Backligh
Language Setting
1. Press the Setup button of your remote twice to enter
the main menu.
2. Use the arrow buttons (3) to select desired function.
3. Press OK (6) to confirm the selection.
4. Press the Return Button (11) to exit the selection.
TIME
Clock - - - - - - - -
Off Time
On Time
Sleep Timer
Auto Sleep
Time Setting
1. Press the Setup button of your remote twice to
enter the main menu.
2. Use the arrow buttons (3) to select desired function.
3. Press OK (6) to confirm the selection.
4. Press the Return Button (11) to exit the selection.
OPTION
OSD Language English
Color Ran ge 0~ 255
Blending Low
HDMI CEC
Osd Duration Off
LED Off
Sound Setting
1. Press the Setup button of your remote to enter
the sound menu.
2. Use the arrow buttons (3) to make your sound
setting selections.
3. Press OK (6) to confirm the selection.
4. Press the Return Button (11) to exit the selection.
SOUND
Sound Mode Standard
Balance
Auto Volume
Surround sound off
SPDIF MODE PCM
EQ
IR Send Off
FM Send Off
USB Menu
EN
Photo Player
1. Select PHOTO in the USB menu and confirm with OK (6).
2. Use the arrow buttons (3) to select one photo and confirm with OK (6).
3. Press Play (13) to start the slide show and Return (11) to go back to the photo menu.
4. Press the Source Button (11) to return to the USB menu.
Music and Video Player
1. Select MUSIC or VIDEO in the USB menu and confirm with OK (6).
2. Use the arrow buttons (3) to select the right file.
3. Press Play (13) to start the playback.
4. Press Play (13) again for pause.
Text Player
1. Select TEXT in the USB menu and confirm with OK (6).
2. Use the arrow buttons (3) to select the right file.
3. Press OK (6) to display the text.
4. Press the Return button (13) to return to the Text menu.
IR Transmitter
IR Transmitter
Line of sight
IR Headphone
(optional)
8
Electronics Subject to correction and technical modifications
ampire
2016
EN
Technical Specifications
Display Size:
Resolution:
Brightness:
Colors:
LED Backlight:
Contrast Ratio:
Viewing Angle:
Video System:
Inputs:
Outputs:
Audio Transmitter:
IR Transmitter
USB Video Formats:
USB Audio Formats:
USB Photo Formats:
USB Sticks:
Operation Voltage:
Current Consumption (Standby):
Current Consuption (max.):
Operation Temperature:
Connection Cable:
Dimensions Closed (WxHxD):
Dimensions Open (WxHxD):
Weight:
10.1” (25,6cm) HD-Ready LED
1280 x RGB x 720 Pixel
600nits
16.700.000
JA
1000:1
H140°, V120°
PAL/NTSC
HDMI, AV (Cinch), USB
AV (Cinch, only when AV Input is selected)
IR CH A: 2.8MHz (R) / 2.3MHz (L)
IR CH B: 3.8MHz (R) / 3.2MHz (L)
FM Transmitter
For wireless Headphones (Hp301)
MPEG1/2/4, RM, RMVB, MOV, DIVX, MJPEG
WMA, MP3, M4A, AAC
BMP, JPEG, GIF, PNG, TIFF
2.0
11VDC - 14VDC
0,04A
2,0A
-10°C - +70C
2,25m
281x251x21mm
281x251x181mm
880g
9
Electronics Subject to correction and technical modifications
ampire
2016
USB Menu
EN
Photo Player
1. Select PHOTO in the USB menu and confirm with OK (6).
2. Use the arrow buttons (3) to select one photo and confirm with OK (6).
3. Press Play (13) to start the slide show and Return (11) to go back to the photo menu.
4. Press the Source Button (11) to return to the USB menu.
Music and Video Player
1. Select MUSIC or VIDEO in the USB menu and confirm with OK (6).
2. Use the arrow buttons (3) to select the right file.
3. Press Play (13) to start the playback.
4. Press Play (13) again for pause.
Text Player
1. Select TEXT in the USB menu and confirm with OK (6).
2. Use the arrow buttons (3) to select the right file.
3. Press OK (6) to display the text.
4. Press the Return button (13) to return to the Text menu.
IR Transmitter
IR Transmitter
Line of sight
IR Headphone
(optional)
8
Electronics Subject to correction and technical modifications
ampire
2016
EN
Technical Specifications
Display Size:
Resolution:
Brightness:
Colors:
LED Backlight:
Contrast Ratio:
Viewing Angle:
Video System:
Inputs:
Outputs:
Audio Transmitter:
IR Transmitter
USB Video Formats:
USB Audio Formats:
USB Photo Formats:
USB Sticks:
Operation Voltage:
Current Consumption (Standby):
Current Consuption (max.):
Operation Temperature:
Connection Cable:
Dimensions Closed (WxHxD):
Dimensions Open (WxHxD):
Weight:
10.1” (25,6cm) HD-Ready LED
1280 x RGB x 720 Pixel
600nits
16.700.000
JA
1000:1
H140°, V120°
PAL/NTSC
HDMI, AV (Cinch), USB
AV (Cinch, only when AV Input is selected)
IR CH A: 2.8MHz (R) / 2.3MHz (L)
IR CH B: 3.8MHz (R) / 3.2MHz (L)
FM Transmitter
For wireless Headphones (Hp301)
MPEG1/2/4, RM, RMVB, MOV, DIVX, MJPEG
WMA, MP3, M4A, AAC
BMP, JPEG, GIF, PNG, TIFF
2.0
11VDC - 14VDC
0,04A
2,0A
-10°C - +70C
2,25m
281x251x21mm
281x251x181mm
880g
9
Electronics Subject to correction and technical modifications
ampire
2016
OHV101-HD
© January 2016 AMPIRE ELECTRONICS. All rights reserved. Reproduction in whole or in part without written permission.
ampire
Since its founding in 1987 Ampire Electronics has only one goal, to provide the best possible
Autoalarm-, Autohifi- and Multimedia products, which are available on the international market.
All manufacturing facilities and suppliers are certified according to ISO 9001 and QS-9000.
Ampire quality products are sold worldwide.
An Ampire customer service is available in many countries.
For more information about distributors in your territory please call: + 49-2181-81955-0.
We are focused on future oriented development of user friendly products.
The outstanding high quality standards, functionalities and designs of our products are unique in the
market. "German Development" is taken literally in AMPIRE.
Langwadener Straße 60
D-41516 Grevenbroich
Techical Support:
Phone: 02181-81955-0
www.ampire.de
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

Ampire OHV101-HD Owner's manual

Category
MP3/MP4 players
Type
Owner's manual
This manual is also suitable for

Ampire OHV101-HD: This 10.1” HD-Ready LED overhead monitor is a versatile and feature-rich device designed to provide an enhanced entertainment and media experience in your vehicle.

Key Features:

  • High-Definition Display: Enjoy crystal-clear visuals with a resolution of 1280 x 720 pixels and a brightness of 600 nits.

  • Multiple Input Options: Connect your devices with ease via HDMI, AV (Cinch), and USB inputs.

  • Versatile Playback: Play a wide range of media formats, including videos (MPEG1/2/4, RM, RMVB, MOV, DIVX, MJPEG), audio (WMA, MP3, M4A, AAC), and photos (BMP, JPEG, GIF, PNG, TIFF) from USB drives.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI