IS 12V 24V 36V 48V Lead Acid Battery Tester User manual

Brand
IS
Model
12V 24V 36V 48V Lead Acid Battery Tester
Category
Rechargeable batteries
Type
User manual

The IS 12V 24V 36V 48V Lead Acid Battery Tester is a compact and easy-to-install device that can measure the voltage and capacity of 12V-48V lithium, iron-lithium, and lead-acid batteries. It features a non-waterproof design, so it should be protected from water in marine or other wet environments. With a simple setup process, you can select the correct code for your battery type and begin testing. The device also includes a switch button at the back for convenient parameter adjustment during panel installation.

The IS 12V 24V 36V 48V Lead Acid Battery Tester is a compact and easy-to-install device that can measure the voltage and capacity of 12V-48V lithium, iron-lithium, and lead-acid batteries. It features a non-waterproof design, so it should be protected from water in marine or other wet environments. With a simple setup process, you can select the correct code for your battery type and begin testing. The device also includes a switch button at the back for convenient parameter adjustment during panel installation.

www.amazon.com/shops/icstation icstation@hotmail.com
1
icstation battery monitor is exterior equipment. It has a compact body, which is easy to be
installed. It can measure DC 12V-48V Lithium battery, iron-Lithium battery, and Lead-acid Battery.
It is not waterproof, so it can not be exposed to water. If you want to use it on the boat or other
environment-related to water, please protect it from water.
✎ How can i use it?
☆when you get the battery monitor, there are some steps you need to do.
⓵confirm the battery type you want to test.
⓶Please set the right code for your battery. (If the battery is a lithium battery, please choose
code" C"; If the battery is a lead-acid battery, please choose code"P"; If the battery is a
iron-lithium battery, please choose code "F")
⓷You can test your battery.
www.amazon.com/shops/icstation icstation@hotmail.com
2
✎How to connect the battery meter?
Please DO NOT connect battery before pressing the button back of the meter.
❶Press and keep holding on the button
❷Please connect your battery
❸Release the button and then enter the setting interface
❹Set correct code based on your battery type by button
Tips: This battery monitor design the switch button at the back of the product. If you worry it is
not convenient to switch battery capacity/ voltage value when installing it in the panel. There will
be another product recommend for you:
https://www.amazon.com/dp/B07CHM3NHH
www.amazon.com/shops/icstation icstation@hotmail.com
3
This product also can measure lithium battery, lead-acid battery and iron-lithium battery.
However, you do not need to worry about how to switch the voltage value and battery capacity
when you install it in panel. Because it adopts the advanced touch screen technology, you can
touch the screen to switch the parameter you need. It is very convenient.
The Battery meter can be applied to portable equipment, universal vehicle panel, e-bike, balance
cars, cleaning machines and so on. Tips: We have uploaded the user manual on technical
specification, please download and read it.
Dear customer. If you are not satisfactory with our user manual, or if you find the
issue of this user manual, please contact us and give us some suggestions. We will
revise the user manual to benefit for more customers. Please trust that we want to
grow better to meet more customers' demands. Thanks for your understanding and
help!
  • Page 1 1
  • Page 2 2
  • Page 3 3

IS 12V 24V 36V 48V Lead Acid Battery Tester User manual

Brand
IS
Model
12V 24V 36V 48V Lead Acid Battery Tester
Category
Rechargeable batteries
Type
User manual

The IS 12V 24V 36V 48V Lead Acid Battery Tester is a compact and easy-to-install device that can measure the voltage and capacity of 12V-48V lithium, iron-lithium, and lead-acid batteries. It features a non-waterproof design, so it should be protected from water in marine or other wet environments. With a simple setup process, you can select the correct code for your battery type and begin testing. The device also includes a switch button at the back for convenient parameter adjustment during panel installation.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents