PRELIMINARY
@6864110R04@
6864110R04-O
010449-O
Models XU1100, XU2100, XU2600,
XV1100, XV2100, and XV2600
SERIES TWO-WAY RADIO
User's Guide
6881038B80.book Page 1 Wednesday, September 26, 2001 4:16 PM
6881038B80.book Page 2 Wednesday, September 26, 2001 4:16 PM
Introduction
-1
Introduction
Thank you for purchasing a
Motorola
XSeries Radio.
Your radio is a product of Motorola’s
70 plus years of experience as a
world leader in the designing and
manufacturing of communications
equipment. The XSeries radios
provide cost-effective
communications for businesses
such as retail stores, restaurants,
schools, construction sites,
manufacturing, property and hotel
management and more. Motorola
professional two-way radios are the
perfect communications solution for
all of today’s fast-paced industries.
Note: Please read this manual
carefully to ensure you know
how to properly operate the
radio before use.
Motorola
Consumer Products Division
1705 Belle Meade Court
Lawrenceville, GA 30043
Package Contents
•Radio
Swivel Belt Holster
NiMH Battery
10-Hour Charger
User's Guide
Accessory Brochure
•Warranty Card
Motorola, the Stylized M Logo, and all other
trademarks indicated as such herein are
Trademarks of Motorola, Inc.
Reg. U.S. Pat. & Tm. Off.
© 2001 Motorola, Inc. All rights reserved.
Printed in the U.S.A. 09/01
For a copy of a large-print
version of this guide, or for
product-related questions,
please contact:
1-800-353-2729 U.S.A.
1-800-461-4575 Canada
1-888-390-6456 TTY (Text Telephone)
On the web, please refer to:
www.motorola.com/radios/professional
6881038B80.book Page -1 Wednesday, September 26, 2001 4:16 PM
ContentsContents
0
Contents
FCC Licensing Information . . . . . . . . . . 1
Safety and General Information . . . . . . . i
Getting Started . . . . . . . . . . . . . . . . . . . . 3
Diagram of Radio and Functions . . . . . . 4
Installing The NiMH Battery . . . . . . . . . 5
Charging . . . . . . . . . . . . . . . . . . . . . . 7
Installing AA Alkaline Batteries . . . . . . . . 8
Battery Meter . . . . . . . . . . . . . . . . . . . . . 8
Swivel Belt Holster . . . . . . . . . . . . . . . . . 9
Turning On/Off Your Radio . . . . . . . . . . 10
Volume . . . . . . . . . . . . . . . . . . . . . . 10
Operating Radio . . . . . . . . . . . . . . . . . . 11
Talk Range . . . . . . . . . . . . . . . . . . . . . . 11
Signal Strength Indicator/
Channel Busy . . . . . . . . . . . . . . . . . . 12
Monitor . . . . . . . . . . . . . . . . . . . . . . . . . 12
Features . . . . . . . . . . . . . . . . . . . . . . . . . 12
Call Tone . . . . . . . . . . . . . . . . . . . . . . . 12
Microphone Gain . . . . . . . . . . . . . . . . . 13
Hands-Free Use/VOX . . . . . . . . . . . . . 13
With Accessories . . . . . . . . . . . . . . 13
Without Accessories . . . . . . . . . . . . 14
Setting Sensitivity Level . . . . . . . . . 14
Scanning . . . . . . . . . . . . . . . . . . . . . . . 15
Editing Scan List . . . . . . . . . . . . . . 15
Setting the Battery Type . . . . . . . . . . . . 16
Lock Keypad . . . . . . . . . . . . . . . . . . . . 16
End-of-Transmission Tone . . . . . . . . . . 16
Keypad Tones . . . . . . . . . . . . . . . . . . . 17
Settings and Functions Display . . . . . . 17
Programming Mode . . . . . . . . . . . . . . . 18
Channel . . . . . . . . . . . . . . . . . . . . . . . . 20
Interference Eliminator Code . . . . . . . . 20
Frequency . . . . . . . . . . . . . . . . . . . . . . 20
Scramble Code . . . . . . . . . . . . . . . . . . 21
Bandwidth . . . . . . . . . . . . . . . . . . . . . . 21
Manager Lock . . . . . . . . . . . . . . . . . . . 21
Assigning Channels to Presets . . . . . . 22
Cloning . . . . . . . . . . . . . . . . . . . . . . . . . 22
Resetting Factory Defaults . . . . . . . . . . 23
Use and Care . . . . . . . . . . . . . . . . . . . . . 24
Frequency and Code Charts . . . . . . . . 25
Troubleshooting . . . . . . . . . . . . . . . . . . 29
Motorola Limited Warranty . . . . . . . . . 33
Product Services:
1-800-353-2729 . . . . . . . . . . . . . U.S.A.
1-800-461-4575 . . . . . . . . . . . .Canada
1-888-390-6456 . . . . . . Text Telephone
6881038B80.book Page 0 Wednesday, September 26, 2001 4:16 PM
1
FCC Licensing Information
FCC
FCC Licensing Information
XSeries professional two-way radios operate on radio frequencies that are
regulated by the Federal Communications Commission (FCC). In order to transmit
on these frequencies, you are required to have a license issued by the FCC.
Application is made on FCC Form 601 and Schedules D, E and G.
To obtain these FCC forms please request document 000601
which includes all
forms and instructions. If you wish to have the document faxed, mailed or have
questions, please use the following contact information.
Before filling out your application, you must decide which frequency(ies) you can
operate on. See the Frequency and Code Charts on page 25.
For questions on determining your radio frequency, please call Motorola Product
Services at:
1-800-353-2729
Faxed
contact the Fax-On-
Demand system at:
Mailed
call the FCC forms
hotline at:
Questions
regarding FCC license
contact the FCC at:
1-202-418-0177
1-800-418-FORM
1-800-418-3676
1-888-CALL-FCC
1-888-225-5322
Or: http://www.fcc.gov
6881038B80.book Page 1 Wednesday, September 26, 2001 4:16 PM
FCC Licensing Information
2
FCC
Changes or modifications not expressly approved by Motorola may void the users
authority granted by the FCC to operate this radio and should not be made. To
comply with FCC requirements, transmitter adjustments should be made only by
or under the supervision of a person certified as technically qualified to perform
transmitter maintenance and repairs in the private land mobile and fixed services
as certified by an organization representative of the user of those services.
Replacement of any transmitter component (crystal, semiconductor, etc.) not
authorized by the FCC equipment authorization for this radio could violate FCC
rules.
Note: Use of this radio outside the country where it was intended to be distributed
is subject to government regulations and may be prohibited.
6881038B80.book Page 2 Wednesday, September 26, 2001 4:16 PM
Safety and General Information
i
Safety and General Information
Important Information on Safe and Efficient Operation
Read This Information Before Using Your Radio
The information provided in this document supersedes the general safety
information contained in user guides published prior to July 2000. For information
regarding radio use in a hazardous atmosphere please refer to the Factory Mutual
(FM) Approval Manual Supplement or Instruction Card, which is included with radio
models that offer this capability.
RF Operational Characteristics
Your radio contains a transmitter and a receiver. When it is ON, it receives and
transmits radio frequency (RF) energy. The XTN Series VHF radios operate in the
frequency range of 151-158 MHz, the XTN Series UHF radios operate in the
frequency range of 461-469 MHz. When you communicate with XU1100 or XV1100
radios the output power level is 1.0 watt, with other XTN Series radios, the output
power level is 2.0 watts
Exposure to Radio Frequency Energy
Your Motorola radio is designed to comply with the following national and
international standards and guidelines regarding exposure of human beings to radio
frequency electromagnetic energy:
United States Federal Communications Commission, Code of Federal
Regulations; 47 CFR part 2 sub-part J
American National Standards Institute (ANSI) / Institute of Electrical and
Electronic Engineers (IEEE) C95. 1-1992
Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition
6881038B80.book Page i Wednesday, September 26, 2001 4:16 PM
Safety and General Information
ii
National Council on Radiation Protection and Measurements (NCRP) of the
United States, Report 86, 1986
International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998
Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to Radio
Frequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300
GHz, 1999
Australian Communications Authority Radiocommunications (Electromagnetic
Radiation - Human Exposure) Standard 1999 (applicable to wireless phones
only)
To assure optimal radio performance and make sure human exposure to radio
frequency electromagnetic energy is within the guidelines set forth in the above
standards, always adhere to the following procedures:
Portable Radio Operation and EME Exposure
Antenna Care
Use only the supplied or an approved replacement antenna. Unauthorized
antennas, modifications, or attachments could damage the radio and may violate
FCC regulations.
DO NOT hold the antenna when the radio is “IN USE. Holding the antenna
affects the effective range.
Two-Way Radio Operation
When using your radio as a traditional two-way radio, hold the radio in a vertical
position with the microphone two to three inches (5. 0 to 7.5 cm) away from the lips.
6881038B80.book Page ii Wednesday, September 26, 2001 4:16 PM
Safety and General Information
iii
Body-Worn Operation
To maintain compliance with FCC/Health Canada RF exposure guidelines, if you
wear a radio on your body when transmitting, always place the radio in a Motorola
supplied or approved clip, holder, holster, case, or body harness for this
product. Use of non-Motorola-approved accessories may exceed FCC RF
exposure guidelines. If you do not use a body-worn accessory, ensure the radio
and its antenna is at least one inch (2.5 cm) from your body when transmitting.
Data Operation
When using any data feature of a device, with or without an accessory cable,
position the device and its antenna at least one inch (2.5 cm) from the body.
Approved Accessories
For a list of approved Motorola accessories refer to the Two-Way Radio section of
www.motorola.com/store.
Electromagnetic Interference/Compatibility
Note: Nearly every electronic device is susceptible to electromagnetic interference
(EMI) if inadequately shielded, designed or otherwise configured for
electromagnetic compatibility.
Facilities
To avoid electromagnetic interference and/or compatibility conflicts, turn off your
radio in any facility where posted notices instruct you to do so. Hospitals or health
care facilities may be using equipment that is sensitive to external RF energy.
Aircraft
When instructed to do so, turn off your radio when on board an aircraft. Any use of a
radio must be in accordance with applicable regulations per airline crew instructions.
6881038B80.book Page iii Wednesday, September 26, 2001 4:16 PM
Safety and General Information
iv
Medical Devices
Pacemakers
The Advanced Medical Technology Association recommends that a minimum
separation of 6 inches (15 centimeters) be maintained between a handheld wireless
radio and a pacemaker. These recommendations are consistent with the
independent research by, and recommendations of the U.S. Food and Drug
Administration.
Persons with pacemakers should:
ALWAYS keep the radio more than six inches (15 centimeters) from their
pacemaker when the radio is turned ON.
not carry the radio in the breast pocket.
use the ear opposite the pacemaker to minimize the potential for interference.
turn the radio OFF immediately if you have any reason to suspect that
interference is taking place.
Hearing Aids
Some wireless radios may interfere with some hearing aids. In the event of such
interference, you may want to consult your hearing aid manufacturer to discuss
alternatives.
Other Medical Devices
If you use any other personal medical device, consult the manufacturer of your
device to determine if it is adequately shielded from RF energy. Your physician may
be able to assist you in obtaining this information.
6881038B80.book Page iv Wednesday, September 26, 2001 4:16 PM
Safety and General Information
v
Safety and General Use While Driving
Check the laws and regulations on the use of radios in the area where you drive.
Always obey them. When using your radio while driving, please:
Give full attention to driving and to the road.
Use hands-free operation, if available.
Pull off the road and park before making or answering a call if driving conditions
so require.
Operational Warnings
For Vehicles with an Air Bag
Do not place a portable radio in the area over an air bag or in the air bag deployment
area. Air bags inflate with great force. If a portable radio is placed in the air bag
deployment area and the air bag inflates, the radio may be propelled with great force
and cause serious injury to occupants of the vehicle.
Potentially Explosive Atmospheres
Turn off your radio prior to entering any area with a potentially explosive
atmosphere, unless it is a radio type especially qualified for use in such areas as
Intrinsically Safe.
Do not remove, install, or charge batteries in such areas. Sparks in a potentially explosive
atmosphere can cause an explosion or fire resulting in bodily injury or even death.
Note: The areas with potentially explosive atmospheres referred to above include
fueling areas such as below decks on boats, fuel or chemical transfer or
storage facilities, areas where the air contains chemicals or particles, such
as grain, dust or metal powders, and any other area where you would
normally be advised to turn off your vehicle engine. Areas with potentially
explosive atmospheres are often but not always posted.
6881038B80.book Page v Wednesday, September 26, 2001 4:16 PM
Safety and General Information
vi
Blasting Caps and Areas
To avoid possible interference with blasting operations, turn off your radio when you
are near electrical blasting caps, in a blasting area, or in areas posted: Turn off two-
way radio. Obey all signs and instructions.
Operational Cautions
Antennas
Do not use any portable radio that has a damaged antenna. If a damaged
antenna comes into contact with your skin, a minor burn can result.
Batteries
All batteries can cause property damage and/or bodily injury such as burns if a
conductive material such as jewelry, keys, or beaded chains touch exposed
terminals. The conductive material may complete an electrical circuit (short circuit)
and become quite hot. Exercise care in handling any charged battery, particularly
when placing it inside a pocket, purse, or other container with metal objects.
Charging Safety Instructions
Before using the battery charger, read all instructions and cautionary markings on:
1. the battery
2. the battery charger, and
3. the radio using the battery.
Caution: To reduce the risk of injury, charge only the rechargeable battery. Other
types of batteries may burst, causing personal injury and damage.
6881038B80.book Page vi Wednesday, September 26, 2001 4:16 PM
Safety and General Information
vii
Save these Instructions
1. Do not expose the charger to rain or snow.
2. Do not operate the charger if it has received a sharp blow, or has been dropped
or damaged in any way.
3. Do not disassemble the charger if it has received a sharp blow, or has been
dropped or damaged in any way.
4. Never alter the AC cord or plug provided with the unit. If plug will not fit the out-
let, have proper outlet installed by a qualified electrician. An improper condition
can result in a risk of electric shock.
5. To reduce risk of damage to cord or plug, pull the plug rather than the cord when
disconnecting charger from AC receptacle.
6. To reduce the risk of electric shock, unplug the charger from the outlet before
attempting any maintenance or cleaning.
7. Use of an attachment not recommended or sold by Motorola may result in a risk
of fire, electric shock, or personal injury.
8. Make sure that the cord is located so that it will not be stepped on, tripped over,
or subjected to damage or stress.
6881038B80.book Page vii Wednesday, September 26, 2001 4:16 PM
Safety and General Information
viii
9. An extension cord should not be used unless absolutely necessary. Use of an
improper extension cord could result in a risk of fire and/or electric shock. If an
extension cord must be used, make sure:
That the pins on the plug of the extension cord are the same number, size
and shape as those on the plug of the charger.
That the extension cord is properly wired and in good electrical condition,
and
That the cord size is18 AWG for lengths up to 100 feet, and 16 AWG for
lengths up to 150 feet.
10. The supply cord of this charger cannot be replaced. If the cord is damaged, call
Motorola Product Services at:
1-800-353-2729 (U.S.A.)
1-800-461-4575 (Canada)
1-888-390-6456 TTY (Text Telephone)
6881038B80.book Page viii Wednesday, September 26, 2001 4:16 PM
3
Getting Started
X
Getting Started
This Users Guide covers several XSeries models, and may detail some
features your radio does not have. Your model number is shown on the back of the
radio above the battery door, and tells you the following information:
Model
Model Number
Location
Frequency
Band
Watts
Number of
Channels
XU1100 UHF 1 1
XU2100 UHF 2 1
XU2600 UHF 2 6
XV1100 VHF 1 1
XV2100 VHF 2 1
XV2600 VHF 2 6
6881038B80.book Page 3 Wednesday, September 26, 2001 4:16 PM
Getting Started
4
X
Diagram of Your New XSeries Radio and its Functions
Indicator Light
Use B to:
Transmit Call Tone
Use M to:
Tal k
Exit a menu
Use \to:
Scroll through menus
Lock the keypad
Use T /
S to:
*Access Presets
Microphone
Use P (Power) to:
Turn power On/Off
Adjust radio volume
Accessory Jack
Radio Plug-in Charging
Audio Accessories
Use J to:
Turn Scan On/Off*
Monitor the Frequency
Use [ and ] to:
Change Channels*
Change menu settings
Speaker
*
XU2600 and XV2600 Only
6881038B80.book Page 4 Wednesday, September 26, 2001 4:16 PM
5
Getting Started
X
Installing the Nickel-Metal Hydride Battery
Your radio is powered by a NiMH
battery, which provides up to 15 hours*
of usage. Please refer to page 9.
Slide the Ribbed Latch on the bottom
of the radio away from the battery
door, or toward the contacts.
Slide and lift the battery door off.
Position the battery with the
Motorola Logo side up, and the
charge contacts are facing the
bottom of the radio. Insert the top of
the battery into the radio and push
the battery up and into the battery
compartment to fit tightly into place.
Slide and snap the battery door into
place.
*Based upon 5% transmit/ 5% receive/
90% standby (standard duty cycle).
Ribbed
Latch
1
2
6881038B80.book Page 5 Wednesday, September 26, 2001 4:16 PM
Getting Started
6
X
Charging with the 10-Hour Charger
Charge the NiMH battery overnight (16 hours)
before using it for the first time, it will only need
up to ten hours of charging thereafter.
Make sure the radio is Off.
Lift the Accessory Cover and plug the
10-Hour Charger (NNTN4077) firmly into
the lower jack (small hole).
Plug the charger into an electric outlet.
The light on the charger will glow red if
charging properly.
Note: For optimum battery life, the battery
must not be left charging for prolonged
periods after reaching full charge.
Charging the battery over the
weekend is acceptable.
If the radio is On while charging,
additional time is required to charge
the battery.
Use only the Charger supplied with
the radio, or other XTN Series
accessories.
Light
6881038B80.book Page 6 Wednesday, September 26, 2001 4:16 PM
7
Getting Started
X
Charging with the 53872 Drop-in Charging Tray
(Not included with all models)
The Drop-in Charging Tray can be
placed on any flat surface and provides
drop-in charging convenience. The
battery can be charged while inside the
radio or removed and placed in the Drop-
in Charging Tray separately. The
batterys contacts must face down and
the Motorola Logo must face the front of
Charger.
Connect the 10-Hour Charger
and Drop-in Charging Tray by
inserting the plug into the rear of the
Drop-in Charging Tray.
Insert the battery or radio into the
Drop-in Charging Tray with the
Motorola logo or radio front facing
toward the front of the Charger.
Refer to charging with the 10-Hour
Charger.
10-Hour Charger
NNTN4077
Drop-in Charging Tray
53872 (NNTN4019)
6881038B80.book Page 7 Wednesday, September 26, 2001 4:16 PM
Getting Started
8
X
Installing AA Alkaline Batteries
Your radio can also use 4 AA batteries; alkaline cells provide up to 24 hours* of radio use.
Battery Meter
The battery meter located in the upper left corner of the display indicates how much
battery power you have remaining.
Push the Ribbed Latch on the bottom of the
radio away from the battery door.
*Please refer to the diagram and Battery Life
on page 5.
Slide and lift the battery door off.
Place the AA batteries matching the
markings in the compartment.
Slide and snap the battery door into place.
Set the correct Battery Type, please refer to
page 16.
Battery
Type
3 Bars 2 Bars 1 Bar Flashing
db c m
NiMH
100%-85% 85%-25% 25%-10% Final 10%
AA 100%-75% 75%-40% 40%-10% Final 10%
6881038B80.book Page 8 Wednesday, September 26, 2001 4:16 PM
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI