Costar CDI2112VTIR Owner's manual

Eyeball Vandal Dome IP

Camera

Instruction

Manual

Engl

ish Version 1.1

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT

OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO

NOT

REMOVE COVER. NO USER SERVICABLE PARTS

INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

The

lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert the user to the

presence of un-insulated "dangerous voltage" within the

product’s enclosure that

may be

of sufficient magnitude to

constitute a risk of electric shock.

The

exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the

literature

accompanying

the appliance.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO

NOT

EXPOSE THIS UNIT TO RAIN OR

MOISTURE.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE

OF THE PLUG TO THE WIDE SLOT AND FULLY

INSERT.

Important

Safeguards

In addition to the careful attention

devoted

to quality standards in the manufacturing process of

your

video

product, safety is a major factor in the design of

every

instrument.

However,

safety is

your responsibility too. This sheet lists important information that will help to assure your

enjoyment and proper use of the

video

product and

accessory

equipment. Please read them

carefully before operating and using your

video

product.

Ins

t

allation

1.

Read and Follow Instructions

-

All the safety and

operating instructions should be

r

ead

befo

r

e

the

video

product is operated.

F

o

ll

o

w

all

op

er

ating

ins

tr

uctions.

2.

Retain Instructions

-

The

safety and operating

instructions should be retained for future

r

e

f

e

r

ence.

3.

Heed Warnings

-

Comply with all warnings on the

video

product and in the operating ins

tru

ctions

.

4.

Polarization

-

Do not defeat the

safety purpose of the polarized

or

grounding-type plug.

A polarized plug has two blades

with one wider than the

o

t

h

e

r.

A gr

ounding type plug has two

blades

and

a third grounding prong.

The wide blade or the third prong

are provided f

or

you

r

safety.

If the provided plug does not fit into

you

r

outlet,

consult an electrician for replacement of the

obsolete outlet.

5.

Power

So

u

r

c

e

s

-

This

video

product should be

ope

r

at

ed

only from the type of

po

w

e

r

sour

ce

indicated on the marking label. If

you

are not sure of

the type of power supply to your

l

oc

a

tion,

co

nsult

your

video

dealer or

l

oc

a

l

power

company.

For video

products intended to operate from battery power,

or

other sources,

refer

to the operating ins

tru

ctions

.

6.

Overloading

-

Do not overload wall outlets

o

f

extension cords as this can

result

in the risk of

fire

or electric shock.

Overloaded AC

outlets, extension

cords,

f

r

ay

ed

po

w

e

r

cords,

damaged

or

c

r

a

c

k

ed

w

i

re

insulation, and broken plugs are

dange

r

ous.

They

may

result

in a shock

or

fire hazard.

P

e

r

i

od

i

c

a

ll

y

examine the

co

r

d

,

and if its

appearance

indic

a

t

es

damage or deteriorated insulation,

have

it

r

e

plac

ed

by your service

t

e

chnician.

7.

Power Cord Protection

-

Power supply cords should

be routed so that they are not

lik

e

l

y

to be walked on

or pinched by items placed upon or against them,

paying

particular attention to cords at plugs,

convenience

r

ecep

t

ac

l

es,

and the point where they

exit from the

video

pr

oduct.

8.

Ventilation

-

Slots and openings in the case

ar

e

provided

for

ventilation to ensure reliable oper

a

t

ion

of the

video

product and to protect it

fr

om

overheating.

These openings

must not be blocked

or

covered. The

openings should never be blocked by

placing the

video

equipment on a bed, sofa, rug,

or

other similar surface. This

video

product should

ne

v

e

r

be placed near or over a radiator or heat

register.

This video

product should not

be

placed in a

built-in installation such as a

bookcase

or

r

a

ck

un

l

ess

proper ventilation is provided or the video

product manufacturer’s instructions

have

been

fo

ll

o

w

ed.

9.

Attachments

-

Do not use attachments

unl

ess

r

eco

mm

ended

by

the

video

product manufacturer as

they may

cause

a h

aza

r

d.

10.

Camera Extension Cables

–

Check

the rating of

your extension

cable(s)

to verify compliance with

your

l

oc

a

l

authority regulations prior to in

s

t

all

a

tion

.

11. Water

and Moisture

-

Do not use this

video

pr

oduct

near water. For example, near a bath tub, wash

bowl, kitchen sink or laundry tub, in a w

e

t

basement, near a swimming pool and the

lik

e.

Caution: Maintain electrical safety.

Po

we

rline

ope

r

ated

equipment or accessories connected to

this unit should bear the UL listing mark of CSA

certification mark on the

accessory

itself

and shou

ld

not be modified so as to defeat the safety

fea

tures.

This

will

help

avoid any

potential hazard

from

electrical shock or fire. If in doubt, contact qualified

service personnel.

12.

A

ccess

o

r

ie

s

-

Do not place

th

is

video

equipment on an unstabl

e

cart, stand, tripod, or table. The

video

equipment may fall, causing

serious

damage

to the video

product. Use this

video

pr

oduct

only with a cart, stand,

t

r

ipod,

bracket, or table

r

eco

mm

ended

by

t

h

e

manufacturer or sold with the

video

product. Any

mounting of the product should

f

o

ll

o

w the

manufacturer’s instructions and use a mounting

accessory

r

eco

mmended by the manufactur

er

.

Precautions

Service

13.

Servicing

-

Do not attempt to service this video

equipment yourself as opening

or

r

e

m

oving

co

v

e

r

s

may

expose

you to dangerous voltage or other

hazards.

Refe

r

all servicing to qualified service

pe

r

sonne

l.

14.

Conditions Requiring Service

-

Unplug this video

product from the

wa

ll

outlet and

refer

servicing to

qu

a

l

ified service personnel under the

f

o

ll

owing

cond

itions:

•

When

the power supply cord or plug is damaged.

•

If liquid has

been

spilled or objects

have

f

a

ll

en

int

o

the

video

pr

oduct.

•

If the

video

product has been

exposed

to

rain or

water

.

•

If the

video

product

does

not operate normally by

f

o

ll

owin

g

the operating instructions. Adjust only

those controls that are covered by the operatin

g

instructions. Improper adjustment of other

co

ntr

ols

may

result

in

damage

and

will

often

r

e

quir

e

extensive

work by a

q

u

a

l

ified technician to

r

es

t

or

e

the

video

product to its normal operation

.

•

If the

video

product

has

been

dropped

or the cabinet

has been damaged.

•

When

the

video

product exhibits a distinct change

in performance. This indicates a need

for

service.

15.

Replacement

Parts

-

When

replacement parts

ar

e

required,

have

the service technician verify that the

replacements used

have

the same safety

characteristics as the original parts. Use of

replacements specified by the

video

pr

oduct

manufacturer can prevent fire,

e

l

ec

tric

shock

o

r

other hazards.

16.

Safety Check

-

Upon completion of

any

service

or

repairs to this

video

product, ask the service

technician to perform safety checks

r

eco

mme

nded

by the manufacturer to determine that the video

product is in safe operating

co

ndition.

17. Wall or

Ceiling Mounting

-

The cameras provided

should be mounted to a w

a

ll

or ceiling

o

n

l

y

as

instructed in this guide, using the provided

mounting

br

acke

ts.

18. H

eat

-

The product should be situated

away

fr

om

heat sources such as radiators, heat

r

e

gis

ter

s,

stoves,

or other products (including amplifiers) that

p

r

oduce

heat.

Use

19.

Cleaning

-

Unplug the

video

product from the

wall

outlet

be

f

o

r

e

cleaning.

Do

not use

l

i

quid

c

l

e

a

ne

r

s

or

ae

r

oso

l

cleaners. Use a damp cloth

for

c

l

e

a

ning.

20.

Product and

Cart

Combination

-

Video

and

c

a

rt

combination should be moved with

c

a

r

e.

Quick

stops,

excessive

force, and

uneven

surfaces may

cause the

video

product and cart combination

t

o

v

e

rturn.

21.

Object and Liquid Entry

-

Never push objects of any

kind into this

video

product through openings as

they may touch dangerous voltage points

or

“short-out

”

parts that could

result

in a fire

or

e

l

ec

tric

shock. Never

spill

liquid of any kind on the

video p

r

oduc

t.

22.

Lightning

- For

added

protection

for

this video

product during a lightning storm, or when it is

l

e

ft

unattended and unused

for

l

ong

periods of time,

unplug it

from

the wall outlet and disconnect the

antenna

or

c

a

b

l

e

system. This

will

p

r

e

v

e

n

t

damage

to the

video

product due to lightning and power line

su

r

ges.

General

Precautions

1. All warnings and instructions in this manual should be

f

o

ll

owed.

2

.

Remove

the plug from the outlet before cleaning.

Do

not use liquid aerosol detergents.

Use

a

water

dampened

cloth for cleaning.

3.

Keep

enough

space

around the unit for ventilation. Slots and openings in the

s

t

o

r

age

cabinet

should not be blocked.

4. During lightning storms, or when the unit is not used for a

l

ong

time, disconnect the

po

wer

supply, antenna, and cables to protect the unit from electrical

sur

ge.

FCC CLASS A

NOTICE

NOTE

This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

ha

rmful

interference when the equipment is operated in a commercial environment. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in accordance with the manu

facturer’

s

instruction manual, may

cause

harmful interference with radio communications.

Operation

of this

eq

uipment

in a residentia

l

a

r

ea

is likely to cause harmful interference, in which case you will be required to correct

th

e

interference at your own expense.

This

equipment

has been

certified

and

found to comply with the limits regulated

by FCC, EMC,

and

LVD.

Therefore, it is

designated

to

provide

reasonable protection against interference

and

will not

cause

interference with other appliance usage.

However,

it is imperative that the user follows the guidelines in this manual to

avoid

improper

usage which may result in damage to the unit, electrical shock and fire hazard injury.

In order to improve the feature functions

and

quality of this product, the specifications are

subje

ct

to

change

without notice from time to time.

Features

•

HD

CMOS

Progressive Scan

•

720p or 1080p models with

real-time

(25/30

fps)

•

Triple-streaming

(H.264/MJPEG)

•

Future proof

ONVIF 2.1

compliance

(1.02

backwards

c

o

mpatibl

e)

•

Compatible with popular third party

VMS

softwar

e*

•

Power-over-Ethernet

(PoE)

operation,

14Watt max/12V

operation

•

Backup options: micro SD

c

a

r

d

,

FTP, NAS,

l

o

c

a

l

•

Mobile Apps: iPhone®, iPad®, Android™

•

Supports two-way audio

•

Simple ins

t

a

llation and adjustment

•

2.8-12mm vari-focal

l

e

ns

•

30 ft. (9m) IR Night

Vision,

T

r

ue

Day/Night (TDN)

•

IP66

Weatherproof and IK5

Vandal

Resistant

•

Multi-browser support:

IE,

Firefox, Safari, Chrome

•

3-axis gimbal

for versatile mounting

*

Check Onvif compliance on for your software.

TABLE OF

CONTENTS

1.

Getting

Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . 1

1.1 Default Camera Username, Password, and Ports . . . . . . . . . .

.

1

1.2 Camera Interior Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

.

2

1.2.1

Functions of Status LED’s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2

1.3

ONVIF

Compatibility and Included Software Overview . . . . . . .

.

3

1.3.2

NVMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3

1.3.3 CD Contents

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3

2.

Connection

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

3.

Camera

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

4.

Finding

the

Camera’s

IP

Address

. . . . . . . . . . . . . . . . . . 8

4.1 Finding the Camera’s IP Address Using NVMS . . . . . . . . . . . . .

.

9

4.2 Finding the Camera’s IP Address using

UPnP

in Windows® 7. .

9

4.3 Finding the Camera’s IP Address using Bonjour® in Mac OS®

10

4.4 Finding the Camera IP using the BNC Test Cable . . . . . . . . . . .

.

11

5.

Configuring Remote

Connection

. . . . . . . . . . . . . . . . . . 12

5.1

Connecting

to a

DDNS

address using NVMS . . . . . . . . . . . . . .

.

15

6.

Web Configuration

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

6.1 Supported Browsers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

.

17

6.2 Chrome, Firefox, and Safari Setup . . . . . . . . . . . . . . . . . . . . . .

.

17

6.3 Internet Explorer® Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

.

18

6.4

Web

Interface/Live

Video Overview

. . . . . . . . . . . . . . . . . . . . . .

.

21

6.4.1

Live

Video

Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

21

6.4.2

Configuring Camera Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

22

6.5

Device

Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

.

23

6.6 Stream Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

.

24

6.7

Device

Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

.

25

6.7.1

Local Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

26

6.7.2 Device

Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

27

6.7.3

Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

28

6.7.4

Date & Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

28

6.7.5

OSD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

30

6.7.6

Microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

31

6

.7.7 BNC Video

Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

.

32

6.7.8

Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

.

32

6.8 Alarm Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

33

6.8.1

Disk Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

.

33

6.8.2

Motion Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

.

34

6.9 Local Record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

36

6.9.1

Record Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

.

36

6.9.2

Record Policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

.

41

6.10

Privacy Masking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

43

6.11

Network Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

44

6.11.1

DDNS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

.

44

6.12 Service

Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

45

6.12.1 SMTP

(Email Alert Setup) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

.

45

6.13

Privilege Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

46

6.13.1

Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

.

47

6.13.2

User . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

.

48

6.13.3

Unlocking User Accounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

.

49

6.14

Protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

50

6.14.1

Protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

.

50

6.15 Device

Restart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

50

6.16

Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

51

6.17

Sensor Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

51

6.17.1

Image Adjust . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

.

52

6.17.2

Shutter Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

.

52

6.17.3 Gain

Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

.

53

6.17.4

Day/Night Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

.

53

6.17.5

Auto Iris . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

.

54

6.17.6

Gamma . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

.

54

6.17.7 AE

Meter

Mode

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

.

55

6.17.8 WB

Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

.

55

6.17.9

WDR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

.

56

6.17.10

Mirror . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

.

57

6.17.11

Noise Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

.

57

7.

Resetting

to

Factory

Defaults . . . . . . . . . . . . . . . . . . . 58

8.

Dimensions

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

9.

Troubleshooting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

1.

GETTING

STARTED

The

system comes with the following

components:

•

1 x Camera

•

1 x Mounting Screw

Kit

•

1 x Allen Key

•

1 x

RJ45

Coupler

•

1 x

BNC

Test Cable

•

1 x Mounting Template

•

1 x Quick Start Guide

•

1 x Instruction Manual

•

1 x Software/Documentation CD

Mounting Screw

Kit:

•

4

x

mounting screws

(PA4

30mm)

•

4 x drywall anchors

Allen Key

RJ45

Coupler

BNC Test

Cable

1.1

Default Camera Username, Password, and

Ports

Username: admin

Password: admin

Ports: 80

(HTTP),

30001

(Control/Streaming), 8080

(RTMP),

554 (RTSP)

IP Address:

DHCP Enabled by Default

(Router will automatically assign IP

address)

NOTE:

Once

you

have

completed the basic setup of the camera, it is

r

e

c

o

mmended

t

o

configure

a

static

IP

addr

es

s.

This

will

pr

ev

ent the

c

a

mer

a

IP address changing in the

event

of a power failure. For details,

see

“6.7.1

Local N

etwork” on page 26.

1.2

Camera

Interior Overview

Access panel. With Micro sd Card slot*. Status LED, camera reset & service

video

*microSD card slot (max. 64GB supported; SanDisk™/Kingston™ brand

memory cards

1.2.1 Functions of Status

LED’s

•

POWER (Top):

Glows

green when camera is

connected

to power.

•

NET (Middle):

Flashes red to indicate network activity. recommended)

CdS Light sensor

Lens Zoom

& focus adjust

1.3

ONVIF Compatibility and Included Software

Overview

This camera is

ONVIF v2.1

compliant. It is designed for interoperability

with

popular

VMS’s and NVR’s*,

with backwards compatibility to

ONVIF v.1.02.

For

more information on

ONVIF,

visit www

.onvif

.or

g

NOTE:

Provided software is

PC

compatible only; Mac

OS® access

to the

cameras is available via Safari® browser only.

1.3.1

NVMS

•

NVMS

is a

client-only solution

that

supports up

to 36 IP

cameras.

NVMS

is a free software provided on the CD.

•

NVMS

supports all the features of the camera. It

can access

microSD/

SD

card recordings and camera setup over a local network.

•

NVMS

manual is provided on the

CD.

1.

3.2 CD Tools

•

CD contents Folders

IP Search ; Search find IP Cameras and set IP address and gateway

NTP Service Tool ; Time Sync Application: IP devices match one PC system time.

FTPUpdater ; Firmware Update tool

IP Support Help Files ; Website support help documents for common problems.

RTSP Tool ; provides RTSP string command f. e.g VLC or Quick-time use

SD Driver ; Ext2 driver for Windows XP to read sd Memory card on PC

Onvif_Help ; documents on Onvif specifications

Open the NTP service ; Windows XP only enables NTP time to be enabled.

Adobe Flash Player ; Flash Video player for Windows IE plugin and Apple Mac OS

Adobe AcrobatReader ; Windows and Max OS Acrobat Reader v10

Files:

IP_series_bitrate_calculator.htm ; Simple storage calculator for IP devices

NVMS_Install.exe ; NVR Software installation for PC

NVMS_Manual_1.7.pdf ; Guide to use the NVMS Software

SNMedia_Player.exe ; File Player for recorded files / backup files from devices /

NVMS.

2.CONNECTION

The

camera has the following termination cables:

1.

RJ45

Network

Interface:

Connect

to a

router

or switch on your network

using

RJ45

Ethernet cable

(Cat5e

or better).

100Mhz

connection. PoE

supported (class 3

PoE

switch

r

e

quir

ed).

NOTE:

Use

the included

RJ45

coupler to connect to male end of RJ45

Ethernet cable.

RJ45

Coupl

er

2.

Audio Input (RCA):

Connect

to a self-powered microphone

for lis

t

en-in

audio.

3.

Audio Output (RCA):

Connect

to an amplifier or self-powered speaker

f

o

r

intercom/2-way audio.

4.

DC12V (1A):

12V DC

power input terminal. Make sure to

f

o

ll

ow

c

o

rr

ect

polarity (+/-) marked on the power connector when connecting to power.

•

Minimum Power Requirement:

450mA

/

5.4W.

Connection

3.

CAMERA

INSTALLATION

Make

sure to follow the correct polarity if connecting

the camera to

DC

power. Polarity is marked on the

power connector.

1.

Use

the included allen

key

t

o

r

e

mo

v

e

make lose the top 1

camera will simple be removed

away

from the

base part.

2.

Use

the included mounting

tem

plate or the camera base

2

plate to mark holes

for

the four

mounting

scr

e

ws.

Mounting Screw Hole

3. M

ount the camera to t

he

s

urface using the included

mounting screws (4x).

3

4.

Now refit camera into base

Adjust position as needed

5.

(Optional)

Insert a microSD

card into the camera. To

enable recording, you mus

t

format

the microSD card and

configure microSD

recording. For details, see

“6.9.1 Record Directory” on

page

36.

sdCard access is behind

pan

el on camera

NOTE:

The

camera supports

microSD cards up to a

maximum size of 64GB.

SanDisk™

or

Kingston™

brand

microSD cards are

recommended.

6. If you need to adjust the

viewing angle,

l

o

osen

the

6

screws on the sides of t

he

bal

l camera and adjust t

he

ball camera.

.

Tighten the

cover

when finished.

7. Adjust camera zoom focus

Use service video cable

7

for BNC output.

Adjust the focus zoom

With small flat blade

Finding the Address

4.

FINDING THE CAMERA’S

IP ADDRESS

Use

the steps below to find the camera’s IP address and connect to the

camera over the local area network

(LAN)

using

NVMS, UPnP

on

Windows® 7, or Bonjour® in Mac OS®.

4.1

Finding

the

Camera’s

IP

Address Using

NVMS

1. Install

NVMS

from the

CD. Now

Doubl

e-click

the

NVMS

icon

(

) on the

Desktop.

The

l

o

g

in screen

appears.

2. U

nder User Name and

Password

,

enter the default

NVMS

user name

(

admin

)

and password

(

admin

).

Click Login.

Enter Admin

Click Login

3.

NVMS

opens and scans the

l

o

c

a

l

network

for

connected

c

a

mer

as.

Detected c

amera IP addresses on the LAN appear in the

Device

List on

the

left

side of the screen with a icon.

Found

camera

IP address

Finding the Address

4. Click on a camera IP address in

Device

List to

l

o

gin.

5. Under

User Name

,

enter the user name

for

the camera (default: admin).

Under

Password

,

enter the password

for

the camera (default: admin).

Click Continue.

Enter Camera User Name

(default: admin)

Enter Camera Password

(default: admin)

Click Continue to login

6.

The

camera appears under the camera IP address. Click and drag the

cam

era to the display grid to open

it.

Click and drag the

camera to the display

grid to open

it

NOTE:

For detailed instructions on using

NVMS,

see the NVMS

manual on the CD.

4.2

Finding

the

Camera’s

IP

Address using UPnP

in

Windows®

7

NOTE:

To use

this method, your

router

must support

UPnP and

the

c

a

mer

a

and

computer must

be

on

the

same

network.

UPnP

is enabl

ed

in

the

c

a

mer

a

by

default,

and

c

a

n

be

enabled/disabl

ed

using

NVMS

(check

the NVMS

manual

for details).

Finding the Address

1. Click

Start>Computer>Network

.

The

camera’s IP address appears

under Network

Infr

as

tructur

e.

Double-click to open

the camera

Network

2. Double-click the camera to open it in your default browser.

3. Under User Name and

Password

,

enter the camera’s User Name

(default:

admin

)

and Password (default:

admin

)

and click

Login

.

Enter Camera User Name (default: admin)

Enter Camera Password (default: admin)

Click Login

4.3

Finding

the

Camera’s

IP

Address using

Bonjour

®

in

Mac

OS®

NOTE:

To use

this method, the camera

and

computer must

be on

the same

network. Bonjour® is enabled by default, and can be enabled/disabl

ed

using

NVMS

(check the

NVMS

manual

for details).

1.

Open

Safari® browser and click the Bookmarks button ( ).

Finding the Address

2. Click

Bonjour

. The

camera’s IP address appears in the Bonjour Devices

list.

3. D

ouble-click the camera to open it in

Saf

ari®.

Bookmarks

button

Bonjour

Double-click the camera’s IP address

4. U

nder User Name and

Password

,

enter the camera’s User

Name

(d

efault:

admin

)

and Password (default:

admin

)

and click

Login

.

Enter Camera User Name (default: admin)

Enter Camera Password (default: admin)

Click Login

4.4

Finding

the

Camera

IP

using

the

BNC Test

Cable

When

the

BNC

test

cable

is

connected

to the camera, the

IP address

is shown

on the test monitor.

The

camera must

be connected

to power to use the BNC

test cable.

NOTE:

The

default IP address of

192.168.0.129

is shown if the

c

a

mer

a

cannot obtain an IP address from the

router.

Check

the Ethernet/power

connections and

router

c

o

nfigur

ation.

Configuring Connection

5. CONFIGURING REMOTE

CONNECTION

Follow the steps below to configure your camera for connections over the

Internet using a web browser,

NVMS,

or other

VMS

software.

Step

1 of 6:

Locate

the

camera’s local

IP address:

•

See

“4. Finding the Camera’s IP Address” on

page 8

.

Step

2 of 6: Port

Forward your

router:

You

need to enable port forwarding for the following ports on your router to

the camera’s local IP address:

•

HTTP

Port (default: 80)

•

Control Port (default: 30001)

NOTE:

If you are configuring multiple IP cameras

for

individual

r

e

mot

e

access, you

must

change

the ports

for

each

camera.

Two

cameras cannot

use the same port number

.

NOTE:

Port forwarding the

RTSP

and

RTMP

ports is not

necessary

unl

es

s

your installation has special

r

e

quir

ements.

There are two methods for port forwarding:

•

You

can

manually port forward your router.

See

yo

ur

router’s user manual

for details. An example of a port forwarding screen is shown below.

HTTP

80 80

100

Control

30001

100

Page is loading ...

Costar CDI2112VTIR Owner's manual

Costar CDI2112VTIR Owner's manual

Related papers

Other documents