PYLE Audio PMNP2S User manual

Category
Loudspeakers
Type
User manual

This manual is also suitable for

PMNP2B PMNP2S
Owners Manual
Rechargeable 10 Watt Mini iPod Speakers
Connecting
Connect a Mini USB plug into the input
jack on each speaker
Connect the stereo 3.5mm audio plug to
the headphone jack of any audio device
Slide the ON/OFF switch of each speaker
to the ON position. The blue LED will
illuminate.
Press Play on your audio device and
adjust its volume to the desired level.
Charging
Connect the larger USB plug into a
powered USB port on your computer.
The LED will turn Magenta while
charging, and back to blue when the
batteries are fully charged.
You can continue use of your
speakers while they charge.
These speakers are powered by a
rechargeable battery in each speaker.
When the blue light dims, or you
experience sound distortion, recharge
the batteries.
  • Page 1 1

PYLE Audio PMNP2S User manual

Category
Loudspeakers
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI