Kohler K-9669-CP Installation guide



 2000 Kohler Co.

GRIP RAILS

 Position the grip rail so the setscrews are to the bottom.

 Press the grip rail fully onto the studs. Then push down-

ward on the grip rail so the narrow slots in the grip rail fit

over the grooves in the studs. Use a 3/32” ball style hex

wrench to securely tighten the grip rail setscrews. Make

sure the grip rail is secure.

 Repeat for the other grip rail.

1001107-2-A

Inside Bath Wall

Grip Rail

Stud

Setscrew

Under

Grip Rail

Setscrew

Under

Grip Rail

Stud

This manual is also suitable for

Download PDF