Triarch Indoor Lighting MR29230 User manual

ASSEMBLY INSTRUCTION FOR MR29230

Strap

Screw

Safety cable

Set screw

Hanger

Paper board

Mirror

Mirror frame

ASSEMBLY:

1. Before beginning assembly, carefully unpack and identify all parts referring to the illustration.

2. Locate the mirror frame and place finished side face down on level work surface. Carefully place

the mirror (reflected side) into the mirror frame, place the paper board over the backside of mirror.

3. Locate and align the holes in the strap with the mounting holes on backside of mirror frame,

secure strap to the mirror frame using screws. Repeat process for remaining strap.

4. Position the mirror on the wall at desired location and marks the place for anchors to be installed

with a pencil.

5. Drill pilot holes on the marked spots and insert anchors, screw the wood screw into the anchor for

the proper length.

6. Carefully hang the mirror onto the wood screw by safety cable (you can choose one of two means

for hanging mirror, one is that the longer side of mirror is down, the other is shorter of mirror is

down).

7. Retain this sheet for future reference.

07.07

This manual is also suitable for

Download PDF