APPLICATION
The 1x7 Telephone Security Module, designed to fit into any Leviton
Structured Media™ enclosure, bridges up to four telephone lines
through to seven outlet locations. It allows operation of up to seven
separate telephones per line and a security interface. Suitable for
phone, fax or modem applications.
STANDARDS COMPLIANCE
Meets or exceeds all applicable standards: TIA/EIA-T568-B and FCC
Part 68.
PHYSICAL SPECIFICATIONS
Dimensions: 1x7 Telephone Security Board:
See second page for details.
Bracket:
See second page for details.
Material: 1x7 Telephone Security Board:
Printed Circuit Board with seven bridged 110-type
IDC connectors and security jack with switch.
Bracket:
ABS plastic, white
DESIGN CONSIDERATIONS
• Fits easily into any Leviton Structured Media enclosure.
• Allows up to seven separate telephone connections, four lines
each.
•Available as a stand-alone module on an ABS plastic bracket.
• Supports security systems via RJ-45 style interface with on/off
(bypass) switch.
WARRANTY INFORMATION
•Two-year limited product warranty.
1x7 Telephone Security Module
1x7 Telephone Security Module
Part Numbers
47609-TSV
2222 – 222nd St. SE • Bothell, WA 98021 USA •
Tel: 1-800-722-2082 / 1-425-485-4288 • Fax: 1-425-483-5270 • Int'l Fax: 1-425-485-9170 • GSA Schedule Available
For Technical Support Call 1-425-485-4288; in USA call 1-800-824-3005
Spec sheets and updates are also available at www.levitonvoicedata.com.
See ELECTRONIC FILES for CAD files (.DXF, .DWG, MS-DOS.EPS) on disk
For ELECTRONIC Typical Specs see (.TXT) file on disk.
TYPICAL SPECIFICATIONS
The 1x7 Telephone Security Module shall meet or exceed all
applicable standards: TIA/EIA-568-B and FCC Part 68. The
board shall be of printed circuit board construction and the
bracket of white, ABS plastic. It shall connect up to four separate
telephone lines to seven outlet locations and an RJ-45 style
security interface. It shall also be available as a stand-alone
module. The manufacturer shall provide a two-year limited
product warranty.